Free Local Classifieds in Tucson, AZ
Search   in
My Location  
> > >

$125, Fresh 221, 260 Or 289 Ford Reground Crankshaft

$125, Fresh 221, 260 Or 289 Ford Reground Crankshaft



  $125, Fresh 221, 260 Or 289 Ford Reground Crankshaft
 

 
Ad id: 1101174554767293
Views: 26
Price
$125.00

I REGRIND KRANKSHAFTS AT MY SHOP 30 HOURS A DAY AND THERE ARE NO UNION BRAKES. I AM REALLY KRANKEN. PICTURED FIRST IN THIS ADD IS A PERFECT FRESH REGROUND SHOP CORE THAT I WOULD LIKE TO SELL AND IT NEEDS NO CORE OR EXCHANGE. MY KRANKS ARE REGROUND ROUND, THERE ARE NO TAPPERS OR HOUR GLASS AND MY KRANKS HAVE PERFECT RESIZING FROM JOURNAL TO JOURNAL. THIS KRANK WILL FIT A 1961-1968 221, 260 OR 289 small block FORD BLOCK OR YOU CAN EVEN INSTALL IT INTO A 302 BLOCK WITH A TWO PIECE REAR MAIN SEAL. USE 289 CONNECTING RODS AND BINGO YOU ARE DOWN THE ROAD WITH A FRESH 289. THIS KRANK HAS CASTING NUMBER 1M AND IT HAS NO WELDED JOURNALS. CASTING NUMBER 1M WILL INTERCHANGE WITH CASTING NUMBERS C1AE, C3AE OR 1MA. ALL OF MY KRANKSHAFTS HAVE BEEN HOT TANKED CLEANED, THE OIL GALLEYS ARE CHAMFERED, THE THRUST FLANGES, BOLT HOLES AND SNOUT ARE ALL INSPECTED AND CHASED AND THEN IT IS REGROUND AND MICRO POLISHED. THIS small block FORD KRANK IS $125.00 OUT THE DOOR. I REGRIND KRANKS WITH THE FINEST ITALIAN STATE OF THE ART HYDRAULIC DRIVEN GRINDER WITH ALL THE BELLS AND WHISTLES THAT CAN BE GOT. CHECK OUT THE CORNER RADIUS GROUND INTO THE JOURNALS AND THE POLISHED FINISH. I HAVE OTHER POPULAR KRANKS REGROUND FOR EXCHANGE AVAILABLE TOO OR I CAN REGRIND YOUR KRANK .010\\\" .010\\\" FOR THE SAME EXCHANGE PRICE, NOT A PENNY MORE. CALL FOR PRICING AND AVAILABILITY. LOOK AT THE BEAUTIFUL 1910 MODEL T FORD I REGROUND, THIS IS NUMBER SWEET 16, THIS KRANK CLEANED UP NICELY AT .005\\\" ON THE MAINS AND .010\\\" ON THE RODS WITH IT\\\'S 1/8\\\" RADIUS AND 4 INCH STROKE. NOW IT IS TIME FOR THE REBABBITTING WORK ON THE MAIN AND ROD BORES. THEN RE-BORE THE BABBIT AND YOU GET A VERY NICE PERFECT FIT. I GRIND THE \\\"BEST DAMN KRANK IN TOWN\\\" I AM KADRIE\\\'S KRANKS. I ALSO HAVE AVAILABLE, OVER 700+ DIFFERENT TOP BRAND NAME BRAND STOCK PASSENGER AND LIGHT TRUCK ENGINE, CAM, RE-RING, BEARING, TIMING AND MASTER KITS ALONG WITH CUSTOM FORGED PISTON AND STROKER KITS FOR GASOLINE ENGINES. I HAVE AND THERE ARE TONS OF NEW SPECIALIZED ENGINE REBUILDING TOOLS AVAILABLE TOO. ALL OF THIS MATERIAL IS AT MY 60,000 SQUARE FOOT WAREHOUSE RIGHT HERE IN TOWN AND MY PRICES CAN NOT BE BEAT. AT MY SHOP I ALSO HAVE SOME MACHINE AND MISC TOOLS THAT I WOULD LIKE TO SELL. THERE ARE THREE SOLID CARBIDE END MILLS, ONE IS A BRAND NEW 1\\\" AND ONE IS A 13/16\\\" BALL MILL AND THE THIRD IS A GOOD USED 1\\\" FOR JUST $50.00. I HAVE A TWENTY SIX INCH PRECISION STRAIGHT EDGE, NOW YOU CAN CHECK YOUR OWN HEADS AND BLOCKS. THERE ARE TWO ENGINE LIFTING PLATES. I DO NOT NEED OR USE ANY OF THIS MATERIAL ANY LONGER. HOPE YOU CAN USE. THERE IS MORE CALL I WILL TELL YOU EVERYTHING THAT IS HERE AT MY SHOP TODAY. SEE MY ADDS IN THE AUTO PARTS AND AUTO SERVICE ADDS IN PHOENIX CRAIG\\\'S LIST AND BACK PAGE. THERE IS SO MUCH MORE I OFFER AT MY SHOP. JUST CALL 480 829 8313. THANKS.

1803 E. Rio Salado Pkwy #105,85281    google map | yahoo map

 
 
 
Similar Items
Last Updated on: November 25, 2017
Report Ad
 
 
Contact Poster by Email

Email Poster

CAPTCHA Image
Refresh Image