Free Local Classifieds
Search   in
My Location  
> >

Wood shaper in Tools For Sale

Filter Search
$145.00   6 days ago
Shaper Cutter Set for Wood - $145 (Barre, MA)

Shaper cutter set for wood, 3 wing, 1/2" center hole. All new, steel, approximately 2-inch overall diameter. 22 cutters. Never used. If interested, send your phone number and best time for me to call you.

$2,200.00   6 days ago
2 SPEED HEAVY-DUTY WOOD SHAPER WITH ASSESSORIES - $2200 (OXFORD)

THIS IS IN EXCELLANT WORKING CONDITION AND HAS BEEN HARDLY USED. IT HAS ALL ASSESSORIES AS SEEN IN PICTURES. 2 SET OF SHAPERS HAVE NEVER BEEN USED. IT HAS ROLLING STAND.IT ALSO HAS SLIDING SHAPER JIG. IT ALSO COMES WITH DELTA CIRCLE CUTTING ATTACHMENT. IT IS 3 HORSEPOWER.

$800.00   3 weeks ago
2 reliant 3 HP wood shaper weaver arch top door jigs. - $800 (Greers ferry AR)

I have 2 reliant heavy duty 3hp 1ph 220v wood shapers they each come with a 1/2 - 3/4 & 1" spindle I'll take $450 each or buy both for $800. They are located in Prim Arkansas that is close to the Greers Ferry lake about 3 hours from Memphis.The last picture is a set of weaver jigs for arch top raised panel doors it will come with some templates also asking $375 for them.

$450.00   3 weeks ago
Reliant wood shaper. 3 hp - $450 (Prim)

This is a 1996 relient wood shaper. It is 3hp 230v single phase. It has a 3/4 spindle in it and also comes with a 1/2" & 1" spindle and a few bushings. It has a heavy duty steel top on it & also comes on a shop built mobile base . asking $450 OBO.For some reason the paint is flaking off of the cabinet but does not hurt the operation of the machine.

$525.00   1 month ago
Rockwell Wood Shaper - $525

Rockwell wood shaper in excellent condition/like new. Very little use. Model 43-122Manual provided.Jim

$4,000.00   1 month ago
Felder wood working shaper w/slider - $4000 (Ruston)

What I have is a super duty felder shaper with slider..shaper is 3 phase..$4000 is a steal for this monster... call James Denton

$900.00   1 month ago
industrial grade wood shaper - $900 (Rapid City)

Grizzly brand industrial wood shaper Model #G1026 see specs at grizzly.comHas been run less than 10 minutes. Plus pick out 10 cutters of my approx 40 used ones.$900 obo605- three81- zero 33 zero605- seven21- nine 43 eightno shippingcash only

$325.00   1 month ago
Grizzly Wood Shaper - $325 (Jackson)

Grizzly Wood Shaper Model #G1024 with owners manualAlso includes Grizzly Carbide Tipped Drawer Joint Shaper Cutter #C2042 andGrizzly Carbide Tipped Glue Joint Shaper Cutter #C2041Unable to respond to text messages or e-mails.Ad will be removed when item is sold.

$250.00   1 month ago
Delta Wood Shaper - $250 (IRON MOUNTAIN)

In town for the week so selling New Delta Wood Shaper (1 1/2 hp) purchased for a project and never used. Very heavy and stable, just not very portable.Great addition to any wood shop. $250 oboThanks for looking, Tom

$150.00   2 months ago
ROCKWELL 43-120 WOOD SHAPER - $150 (northwest tucson)

Rockwell Model 43-120 Wood Shaper or

$150.00   2 months ago
Delta Wood Shaper with Reverse-able 1/2 HP Delta Motor - $150 (Wilmington)

Delta Wood Shaper with Reverse-able Delta Motor and Delta rotation controller.(Useful to flip bit and run opposite direction for some wood grain) Cast iron table top is smooth and kept well waxed for good feed control. Bit height is adjustable with helix collar and lever lock system. Includes Delta Split fence system and Miter fence. Comes with Heavy duty base/motor frame. Have tongue and groove b

$350.00   2 months ago
delta cast iron top mini wood shaper - $350 (Ash Flat)

never used it. sat on my garage floor for years has the very rare large accessory top included never installed. top was a extra $100far better than router tableCall Jimmy at \ No text, land line] see my other tools welders saws grinders and more

$1,025.00   2 months ago
Heavy Duty Wood Shaper - $1025 (Troutdale, VA)

3 hp 240v heavy duty wood shaper (Grizzly). Fence upgraded to shop fox model with 3" dust port and rack and pinion fence control including micro gauge. Shaper comes with 3- 3" interchangeable spindles (1/2", 3/4", 1"), a 4"- 1" spindle, 1/2" router collet, miter gauge, and manual. Motor has 2 speeds with reverse switch (7000 and 10000 RPM). Original Grizzly fence comes with the shaper with hold do

$2,400.00   2 months ago
20" Planer, Table saw, and Wood shaper for sale - $2400

I'm selling a Walker Turner 2HP 3 phase table saw with a table extension, a Bridgewood 20" 7 1/2HP 3 phase planer (user's manual included), and an Oliver 5HP 3 phase wood shaper with a power feeder. All three are in good condition, and all work. Looking to get rid of these because I have new equipment that can handle a bigger workload. $400 for table saw, $1000 for planer, and $1000 for shaper. If

$150.00   2 months ago
Rockwell Wood Shaper 220 Volt - $150

Includes a raised panel cutter

$125.00   2 months ago
Wood Shaper - $125 (Tomah)

Sears 1/2 hp wood shaper with 1/2 spindle and 7 cutters, motor is reversible 120 volts, will consider trade

$350.00   3 months ago
wood shaper, door making set - $350 (waterford)

JET WOOD SHAPER, 1HP, INCLUDING DOOR MAKING SET, BEAD CUTTER, HOLD DOWNS, ETC.350 obo

$750.00   3 months ago
Table saw and wood shaper. - $750

For sale one good used heavy duty Delta Uni-saw patent 2106288 and a Heavy duty Craftsman wood shap'er model 113.239291 with a large assortment of cutting bits. $750.00 OBO or possible trade for a 1911 Colt pistol. Both machines are in excellent condition.

$450.00   3 months ago
Wood Shaper - $450 (Blountville)

Craftsman ½ HP Shaper mod 113.239291, Freud Raise Panel Cutter, Carbide Rail and Stile 3 wing Cutter set, various other Cutters, Good Shape. (These cutters are worth more than the machine) $ 450.00 does beautiful work. or

$900.00   3 months ago
Rockwell Heavy Duty Wood Shaper - $900

Rockwell commercial wood shaper 220 volt. 3hp. Comes with an assortment of carbide bits and mobile base as well.Let me know if you want to come take a look I'm cleaning out the shop and also have listings for a table saw truck tool box, and truck lumber rack. Everything works great I've just upgraded over the years.


1 2 3 4 5 6


Last Updated on: August 24, 2017
0.0312809944153
1.90734863281E-6