Free Local Classifieds
Search   in
My Location  
> >

Used drum sander in Tools For Sale

Filter Search
$2,500.00   1 day ago
horizontal Edge sander - $2500 (29924)

This is a horizontal Edge sander it has 5 sanding locations on the lodge Platinum side I used it mostly for fitting cabinet doors when I did inset doors it did such a fantastic job and was very fast they on the other side it has a platinum head that is like a jointer you can set it so that it would take off a certain percentage of wood then there is the large 7 inch diameter drum that is over the

$500.00   3 days ago
Performax ( Jet ) 10-20 Plus Benchtop Drum Sander - $500 (Xenia)

Great condition, hardly used. Bearings and adjustment screw all turn smoothly. Its open ended so you can sand material up to 20 inches wide and 3 inches thick. It has factory 4 inch dust collection port and adjustable speed control for the feeder belt and is direct driven. I have multiple Jet factory cut papers in different grit and a new sleeve for the feeder belt, all included as well as the hig

$2,500.00   3 days ago
horizontal Edge sander - $2500 (29924)

This is a horizontal Edge sander it has 5 sanding locations on the lodge Platinum side I used it mostly for fitting cabinet doors when I did inset doors it did such a fantastic job and was very fast they on the other side it has a platinum head that is like a jointer you can set it so that it would take off a certain percentage of wood then there is the large 7 inch diameter drum that is over the

$400.00   6 days ago
Jet drum sander - $400

Nice little drum sander, hardly used, comes with lots of extra sand paper in various grits, call or text 541571242four

$2,500.00   1 week ago
horizontal Edge sander - $2500 (29924)

This is a horizontal Edge sander it has 5 sanding locations on the lodge Platinum side I used it mostly for fitting cabinet doors when I did inset doors it did such a fantastic job and was very fast they on the other side it has a platinum head that is like a jointer you can set it so that it would take off a certain percentage of wood then there is the large 7 inch diameter drum that is over the

$950.00   2 weeks ago
Performax 16-32 Power Drum Sander - $950 (Columbia Falls)

Performax 16-32 Power Drum Sander, like new, used very little. Comes with several (16) new sanding belts of various grits. 16" work length for up to 32" wide pieces when run through two ways, variable speed power feed, lockable wheel dolly. Cut your sanding time way down, a real time saver.

$3,000.00   2 weeks ago
$3,000, Hardwood floor equipment

12\\\" drum sander with (1) 100\\\', (2) 25\\\' 220volt cords with pigtails, adapters and a 30amp junction box for hard wiring into main or older style electric panel. A Super 7 edger that cuts great and a 17\\\" Powerflite maintenance machine with regular drive and hard drive for a variety of needs and uses.. Floor buffer 3yrs old, barely used. Edger in excellent condition, cuts great, adjusted p

$3,000.00   2 weeks ago
$3,000, Hardwood floor equipment

12\\\" drum sander with (1) 100\\\', (2) 25\\\' 220volt cords with pigtails, adapters and a 30amp junction box for hard wiring into main or older style electric panel. A Super 7 edger that cuts great and a 17\\\" Powerflite maintenance machine with regular drive and hard drive for a variety of needs and uses.. Floor buffer 3yrs old, barely used. Edger in excellent condition, cuts great, adjusted p

$850.00   3 weeks ago
Surface sander - $850 (Kfalls)

31-255X DELTA X5 18" X 36" DRUM SANDER with moble stand. In great shape hardly used. $850.00 cash firm.

Contact Us   4 weeks ago
Wood shop tools (Klamath falls)

Ramco industrial band saw $1000 or offer. Good conditionShop Fox 7" mini/planer moulder Modelw6193. $800 Good condition Grizzly 12"drum sander Model G0459. $400 Good conditionJet lathe Model Jwl-1236Extra chucks and centering head$600 with 1 set of tools. Good condition Robert Sorby professional turning tools Model 82HS-W with 2 extra tools. 1 extra tool model 842FLH No number for other tool. $400

Contact Us   4 weeks ago
ShopSmith Mark V (Sioux Falls)

I have my ShopSmith up for sale/trade. I only ever seem to use the lathe and table saw functions on it, so I am looking to sell it or trade/partial trade for dedicated table saw and lathe since I don't use the numerous other functions/tools this is capable of. Right now it is on a wooden base as you can see in the photos- I put it on there because I wanted a heavier base for wood turning, but it c

Contact Us   4 weeks ago
Woodworking tools (Eulonia/Shellman Bluff)

I have a whole shop full of woodworking tools. Craftsman 1hp 6-1/8 in jointer planer. Grizzly G0453 15" planer. Performax ShopPro 25 drum sander. Grizzly G0514X2 19" Extreme Series bandsaw. Grizzly G1035 1-1/2hp shaper. All are in excellent condition and lightly used. I also a have 2 dust collection systems. Make me a reasonable offer on one or all.

$1,000.00   1 month ago
Supermax 19-38 Drum Sander with in/out feed tables - $1000 (Baden, PA)

I have a Supermax 19-38 drum sander with the in feed/ out feed tables for sale. I have 2 Supermax 220 rolls, and a roll 35 feet long that is trim your self that will come with the sander. I paid $1500 for the sander and tables about 6 months ago, and they have not been used that much.I will not accept checks, money orders, or a cashiers checks via mail and ship/ have picked up, so dont bother aski

$500.00   1 month ago
Shop smith crafter station - $500 (Helena)

Scroll saw, band saw( used once, needs new tires as they sat too long approx. $30), table saw, drum sander, shop vac, and many never used accessories! Cash only, serious local buyers please, will not hold for more than a day. Thanks

$600.00   1 month ago
Total Shop power tool- - $600 (Stillwater)

I have a Total Shop - like Shopsmith - with all the attachments, tools and It has the Bandsaw attachment. It functions as table saw, drill press, turning lathe, band saw, disk sander, drum sander, molding unit, and many more. Has a 2.5 hp motor, variable speeds for all the functions listed. See in pictures all the tools that come with the unit. Comes with blades, tools and many other things , see

$549.00   1 month ago
Kearney-Trecker 12" model K dividing head-two plates - $549 (Tipton (IND28 at US31))

1970 Kearney-Trecker 12" model K dividing head with two plates, #22690 (60, 66, 72, 84, 92 96 & 100 holes), the other is 53-86-67-56. The model K is called a Universal Spiral Dividing Head. This model dividing head is capable of being gear driven via a conventional or low reduction gear attachment from the lead screw of standard (.250"/rev.)table. Actually with some gear changes in the gear at

$2,500.00   1 month ago
Haney Pro Sand 36 inch Drum Sander - $2500 (Quitman)

Made with American parts in America.Very good condition.It features 2 36" drums.7 1/2 HP Baldor Single Phase MotorGoodyear rubber feeder belt.Browning bearings with alemites.GE electricsThey make some that were cheaper than this one, but were a lot lighter duty.I bought it new ($4800.00) and used it to sand panels for cabinet doors until I had to retire due to health problemsTHIS IS A PICK-UP ONLY

$850.00   2 months ago
Surface sander - $850 (Kfalls)

31-255X DELTA X5 18" X 36" DRUM SANDER with moble stand. In great shape hardly used. $850.00 cash firm.

Contact Us   2 months ago
Used Production Machinery Sale - All Must GO - Lathes, Sanders, Drills (4200 NW 72 St)

Large Warehouse of Used Machinery in working condition. We have recently reduced pricing on all used Machinery, Everything must go and no reasonable offer will be refused. Our store Tool and Equipment Sales Corp. is open to the public and all Machinery is available for viewing We are open Mon-Fri 8am - 5pm and Sat 8am-1pm No appointment is necessary, just come on in and we will show you anything y

Contact Us   2 months ago
Blowout Sale on Machinery, LATHES, DRILL PRESS, CHOP SAW, SHAPERS (Miami)

Large Warehouse of Used Machinery in working condition. We have recently reduced pricing on all used Machinery, Everything must go and no reasonable offer will be refused. Our store Tool and Equipment Sales Corp. is open to the public and all Machinery is available for viewing We are open Mon-Fri 8am - 5pm and Sat 8am-1pm No appointment is necessary, just come on in and we will show you anything y


1 2 3 4 5 6 7 8 9


Last Updated on: July 22, 2017
0.0327131748199
2.14576721191E-6