Free Local Classifieds
Search   in
My Location  
> >

Used drum sander for sale in Tools For Sale

Filter Search
$2,300.00   2 weeks ago
For sale Woodmaster 4 in 1 molder,planner,sander,saw.. - $2300 (Hayward)

I have a never been used Woodsmaster 712..... 4 in 1 molder, planner, drum sander, saw..It has 5 hp 220 volt planner/molder motor and 110 volt feeder motor ...feed speed 1 to 100 feet per minute. Comes with pro pac and wheel kit...retail over $3,100.00 sale for $2,300.00. FrimCall 715634one49three or text 715 55eight179one ask for mark

$200.00   3 weeks ago
Going out of Business Sale: Woodworking Tools for Sale - $200 (Asbury / Albertville)

15" Jet Planer, 220 Volts, $700Vacuum, 220 Volts, for use with planer of can be used for whole shop, $400Large 24" Cut, Radial Arm Saw, 220 Volts, $4006" Jet Jointer, $40018/36 Drum Sander, $400300' Red Cedar. Ready to use. Various widths and sizes, $300200' Oak. Ready to use. Various widths and sizes, $200(Other tools Available)Call Eddie:

Contact Us   1 month ago
Festools For Sale (Ham Lake)

A majority of the Festool that I had are gone. I do have a Kapex with stand and left and Right table extensions. I also have a half sheet Oscilating Festool Sander, and a complete Multi Table.The majorityu of my tools will be sold for 75% of what it would cost you wherever you buy your fine wood working tools and equipment.Most of this is like new, some never used.I will also have some other piece

$3,400.00   3 months ago
Performax Supermax 37x2 Double Drum Sander - $3400 (Flushing)

I have a Performax Supermax 37x2 Double Drum sander for sale. It is used but is in overall good condition. It has a single phase 5 hp Leeson Motor and the intellisand drive belt technology. I have lots of sandpaper for this sander that will come with it. I can get an exact count, but likely enough for 20 fresh rolls in varying grits. I made a new drum cover out of plywood and upgraded it with 3 5"

Contact Us   4 months ago
Case Woodworking Supply - Sale Saturday 9/16/17 (Savannah, GA)

Case Woodworking Supply will be open this Saturday, September 16, from 9:00 AM to 1:00 PM. We have the following items on sale this Saturday:-Lenga (Chilean Cherry) project packs w/ approx. 15 BF - $75.00 each (reg. $90).-10% OFF All Live Edge Slabs! Species include African Mahogany, Sapele, Black Walnut, Cherry, Poplar, Granadillo, Katalox, Bloodwood, Guanacaste, Bocote, Purpleheart, Olivewood, C

Contact Us   4 months ago
Case Woodworking Supply - Sale Saturday 9/16/17 (Savannah, GA)

Case Woodworking Supply will be open this Saturday, September 16, from 9:00 AM to 1:00 PM. We have the following items on sale this Saturday:-Lenga (Chilean Cherry) project packs w/ approx. 15 BF - $75.00 each (reg. $90).-10% OFF All Live Edge Slabs! Species include African Mahogany, Sapele, Black Walnut, Cherry, Poplar, Granadillo, Katalox, Bloodwood, Guanacaste, Bocote, Purpleheart, Olivewood, C

Contact Us   4 months ago
Case Woodworking Supply - Sale Saturday 9/16/17 (Savannah, GA)

Case Woodworking Supply will be open this Saturday, September 16, from 9:00 AM to 1:00 PM. We have the following items on sale this Saturday:-Lenga (Chilean Cherry) project packs w/ approx. 15 BF - $75.00 each (reg. $90).-10% OFF All Live Edge Slabs! Species include African Mahogany, Sapele, Black Walnut, Cherry, Poplar, Granadillo, Katalox, Bloodwood, Guanacaste, Bocote, Purpleheart, Olivewood, C

Contact Us   4 months ago
Case Woodworking Supply - Sale Saturday 9/16/17 (Savannah, GA)

Case Woodworking Supply will be open this Saturday, September 16, from 9:00 AM to 1:00 PM. We have the following items on sale this Saturday:-Lenga (Chilean Cherry) project packs w/ approx. 15 BF - $75.00 each (reg. $90).-10% OFF All Live Edge Slabs! Species include African Mahogany, Sapele, Black Walnut, Cherry, Poplar, Granadillo, Katalox, Bloodwood, Guanacaste, Bocote, Purpleheart, Olivewood, C

Contact Us   4 months ago
Case Woodworking Supply - WEEK LONG MEGA SALE! Starts 8/28 (Savannah, GA)

Week Long MEGA SALE! Starts Monday, August 28th. We will be open regular hours Monday thru Thursday from 8 AM to 5 PM, PLUS, we will be open Friday (9/1) and Saturday (9/2) from 9 AM to 1 PM. We have more items on sale this week than ever before. It's time to stock up for fall and we've got deals you won't want to miss. Lumber, turning blanks, live edge slabs, machinery, and accessories are all on

$2,400.00   5 months ago
Lagler Hummel 8 inch Drum Sander

Up for sale is a used but in great working condition Lagler Hummel 8" Drum Sander.  It has been tested and is fully functional runs on 220 volts. Comes with dust bag and cable.

$2,000.00   5 months ago
Galaxy Super Eagle Sander

Up for sale, a very lightly used Galaxy Super Eagle floor sander.  It comes with one hard plate and an extra felt.   This machine was customized when I bought it from Canada.  It now has a slotted drum so you can use cut sheets when you run out of belts.  The 2000 model has the same slotted drum that you can also run a belt on.  There is a local shop that converts Omegas t

$2,000.00   5 months ago
Silverline Pro 8 Floor Sander Eight Inch Drum Sanding Machine

For sale is a barely used for less than 30 hours  Silverline Pro 8 Floor Sander.

Contact Us   6 months ago
Delta Professional Woodworking Tools

Delta x-series Professional tools for sale: most have never been used. 15" planer with dust hood and stand contains 22-780x, 22-678, 22-785x, 50-785 $850. 14" Bandsaw 28-475x with stand $590. Drum sander with stand 31-255x $590, Dust Collector 50-851, 50-846, 50-847 $350, Oscillating spindle sander SA350k/31-350 $135, and 2 scroll saws. Prices present an excellent deal 715-495-0864

Contact Us   6 months ago
Delta Professional Woodworking Tools

Delta x-series Professional tools for sale: most have never been used. 15" planer with dust hood and stand contains 22-780x, 22-678, 22-785x, 50-785 $850. 14" Bandsaw 28-475x with stand $590. Drum sander with stand 31-255x $590, Dust Collector 50-851, 50-846, 50-847 $350, Oscillating spindle sander SA350k/31-350 $135, and 2 scroll saws. Prices present an excellent deal 715-495-0864

Contact Us   7 months ago
ShopSmith Mark V (Sioux Falls)

I have my ShopSmith up for sale/trade. I only ever seem to use the lathe and table saw functions on it, so I am looking to sell it or trade/partial trade for dedicated table saw and lathe since I don't use the numerous other functions/tools this is capable of. Right now it is on a wooden base as you can see in the photos- I put it on there because I wanted a heavier base for wood turning, but it c

$1,000.00   7 months ago
Supermax 19-38 Drum Sander with in/out feed tables - $1000 (Baden, PA)

I have a Supermax 19-38 drum sander with the in feed/ out feed tables for sale. I have 2 Supermax 220 rolls, and a roll 35 feet long that is trim your self that will come with the sander. I paid $1500 for the sander and tables about 6 months ago, and they have not been used that much.I will not accept checks, money orders, or a cashiers checks via mail and ship/ have picked up, so dont bother aski

$549.00   8 months ago
Kearney-Trecker 12" model K dividing head-two plates - $549 (Tipton (IND28 at US31))

1970 Kearney-Trecker 12" model K dividing head with two plates, #22690 (60, 66, 72, 84, 92 96 & 100 holes), the other is 53-86-67-56. The model K is called a Universal Spiral Dividing Head. This model dividing head is capable of being gear driven via a conventional or low reduction gear attachment from the lead screw of standard (.250"/rev.)table. Actually with some gear changes in the gear at

Contact Us   8 months ago
Used Production Machinery Sale - All Must GO - Lathes, Sanders, Drills (4200 NW 72 St)

Large Warehouse of Used Machinery in working condition. We have recently reduced pricing on all used Machinery, Everything must go and no reasonable offer will be refused. Our store Tool and Equipment Sales Corp. is open to the public and all Machinery is available for viewing We are open Mon-Fri 8am - 5pm and Sat 8am-1pm No appointment is necessary, just come on in and we will show you anything y

Contact Us   8 months ago
Blowout Sale on Machinery, LATHES, DRILL PRESS, CHOP SAW, SHAPERS (Miami)

Large Warehouse of Used Machinery in working condition. We have recently reduced pricing on all used Machinery, Everything must go and no reasonable offer will be refused. Our store Tool and Equipment Sales Corp. is open to the public and all Machinery is available for viewing We are open Mon-Fri 8am - 5pm and Sat 8am-1pm No appointment is necessary, just come on in and we will show you anything y

$549.00   10 months ago
Kearney-Trecker 12" model K dividing head-two plates - $549 (Tipton (IND28 at US31))

1970 Kearney-Trecker 12" model K dividing head with two plates, #22690 (60, 66, 72, 84, 92 96 & 100 holes), the other is 53-86-67-56. The model K is called a Universal Spiral Dividing Head. This model dividing head is capable of being gear driven via a conventional or low reduction gear attachment from the lead screw of standard (.250"/rev.)table. Actually with some gear changes in the gear at


1 2


Last Updated on: January 23, 2018
0.0419671535492
2.14576721191E-6