Free Local Classifieds
Search   in
My Location  
> >

Used delta unisaw in Tools For Sale

Filter Search
$1,500.00   1 week ago
Delta 10" Table Saw - $1500 (Cathedral City)

Delta Unisaw 10" Left Tilt Pedestal Table Saw With Factory Extension Table And Biesmeyer Fence. Excellent Condition, Twelve Years Old Though Rarely Used. (Floor Dolly Shown In Photo Is Not Included). Asking $1500.00 Or Trade For Street Motorcycle Of Comparable Value. Call Don @

$325.00   2 months ago
Vintage Delta table saw - $325 (Roanoke)

This is a vintage 1948 Delta Rockwell table saw with complete fence set up, all original except power cord. It is in almost pristine condition, on a stand with wheels, but very heavy. It is a tilting table, not a tilting arbor. It can run 220 30 amp or 110 power. Currently it is set to run on 220. Ten inch blade is installed. The drive is by belt, on double pulley. You would be hard pressed to fin

$1,600.00   2 months ago
delta left tilt Unisaw - $1600 (Berrien Springs)

Delta model 36-8693HP 230 volt single phase motorMade in August 2001USA madeleft tilting50" Biesemeyer fenceDelta Mobile basedust collection port in the backtwo throat platesThree bladesBlade guardFeather blockpush handleArbor wrenchesOriginal manualsMachine was in storage for 5 yearsVery nice saw used in a hobby shop

$1,600.00   2 months ago
delta left tilt Unisaw - $1600 (north of South Bend)

Delta model 36-8693HP 230 volt single phase motorMade in August 2001USA madeleft tilting50" Biesemeyer fenceDelta Mobile basedust collection port in the backtwo throat platesThree bladesBlade guardFeather blockpush handleArbor wrenchesOriginal manualsMachine was in storage for 5 yearsVery nice saw used in a hobby shop

$400.00   4 months ago
Delta Unisaw Cabinet Tablesaw w/ Biesemeyer T-Square Fence - $400 (Flat Rock, IL)

If you are interested and correspond through Email- "please check your spam email account as a lot of Craigslist replies end up there" if you do respond and are interested. Include your phone number. I can easily load the saw into your pickup bed in less than 5 minutes.This is first come first serve cash only.Older used Delta Unisaw commercial table saw. Biesemeyer T-Square fence.The knob on the a

$10,000.00   4 months ago
various tools including delta unisaw, router, ect - $10000 (Charles City)

This is a bunch of tools I'm looking to get rid of. I injured my back and can't tolerate woodworking any longer. Delta Unisaw with extension table, Unifence with 52" to right of blade, roller table for long outfeed pieces with storage on it for blades or whatever. 1 1/2hp motor wired for 120v. Woodworker II thin kerf blade with hardly any use on it. Dial indicator for blade alignment as well as or

$1,600.00   4 months ago
Delta Unisaw - Cabinet Style Table Saw - $1600 (Palm Coast)

Up for sale I have an excellent condition Delta Unisaw. It comes with the Biesmeyer fence system, a router table built into the extension, an under table rolling cart with storage and router dust collection built in, auxiliary fence for routing, built in outfeed table, and much more. The saw is in excellent condition and is worth well over 3k for what's included here. I do not have to sell but I w

Contact Us   4 months ago
Woodshop Tools & Workbench (Arvada)

Various shop tools individual prices listed below. All are in used condition, moving all must go ASAP! TEXT for more info, my cell service is weak where I'm at. Cross Posted* 10" Delta Unisaw $400* 6" x 48" Jointer/Planer, 110 volt, $200* 48" Belt /10" Disc Finish Sanded 220 volt $250* Ryobi Barrel Finish Sanded $400* 20" Scroll saw - 10 New blades, 110 volt, needs new motor, $150* 8ft long 3 ft d

$1,950.00   5 months ago
Delta 10" Unisaw and Table - $1950 (Fairbanks)

Delta 10" tilting arbor unisaw with Biesemeyer table. Excellent condition. Second owner, never used.

$1,200.00   5 months ago
Delta Unisaw - $1200 (Todd, NC)

Delta Unisaw - Platinum Edition3hp, Biesemeyer fence, Back up saw used very little. In storage 10 years.

$1,200.00   5 months ago
Table Saw - $1200 (Todd NC)

Delta Unisaw Platinum Edition10" 3hpBiesemeyer fenceBack up saw. Used very littleIn storage 10yrs

$400.00   5 months ago
DELTA Machinery and More! - $400 (Mandeville)

I have some Delta Machinery Work Station Tools for Wood Working. These items have very little time on them; used a total of 10 times at most.The tools were in an area that received water damage. The area and tools were not flooded; water actually dripped down from the ceiling onto the Work stations. They all work, just need to be cleaned up because of surface rust. You would be responsible for tra

$1,000.00   5 months ago
Delta Unisaw Table saw 10" - $1000 (Bowling Green)

For sale is a Delta 10" UnisawNew paint, new belts, new motor bearings, no blade runout, new wiring throughoutIt has an Altecnica Professional Carbide blade3 HP motor single phase 120 or 230CASH ONLYI have not used the saw bought it to restore and resale. Everything works. Fence operates and slides well.Powermatic craftsman Rigid Dewalt miter saw

$1,000.00   5 months ago
Delta unisaw - $1000 (Lake worth)

Delta unisaw 50" crosscut single phase 220v comes with high volume dust collector . Great saw ,a must have for any cabinet shop or any real wood work shop . I've had it for a few years but rarely used as I sell cabinets mostly only a few custom pieces here and there and I need more space . The saw cost me 3-4 thousand 2 1/2 years ago .

$950.00   6 months ago
table saw to make cabinets - $950 (rochester)

Delta 34-802 Unisaw 10" Tilting Arbor Table Saw with large table (5x6) bed. This 3-phase / 3-hp Delta saw has a router attached to the bed. It was used to make cabinets. Serial # 89B05699 and Catalog # 34-802.

$50.00   6 months ago
2-HP Rockell-Delta 3 Phase Unisaw Motor - $50 (Canyon Lake)

For Sale:Used Rockwell 2-HP 3 Phase original Delta Unisaw motor model number 87-310Motor came off of a 1950 Delta Unisaw. This was a working motor and could be used with 120/240 volt power by adding a phase converter unit. Manufactured by Doerr Electric Corporation.Motor Specs:Model # 87-310Frame 182 Type PF2-HP3450 RPM3 Phase power Volts: 208-220 / 440Amps: 6.2 / 3.1Weight is 80 lbs.Price is $50

$225.00   6 months ago
Rockwell-Delta 3-HP Unisaw Motor 120/240 Volt 1 Phase - $225 (Canyon Lake)

For Sale:Very nice used Delta Unisaw motor that was rebuilt/rewound by a professional re-builder and is in perfect working order.Motor also comes with a first class industrial Allen-Bradley push button power switch.Motor Specs:Model #83651Type 634L Frame 184YZ3-HP3450 RPM1 Phase power 60 HertzCan use either 115 volts or 230 voltsAmps - 32 on 115V and 16 on 230VWeight is 95 lbs.Price is $225CASH On

$1,000.00   6 months ago
Delta Unisaw - $1000 (Fairfield)

Very nice used Delta Unisaw . 52" fence with reinforced side table. Also included is the out feed table you see in the pictures. Has the over arm fence. Table is in excellent condition.

$1,350.00   6 months ago
TABLE SAW - UNISAW 36-812 - $1350 (Dubuque, IA)

DELTA UNISAW WITH 52" UNIFENCE. In excellent condition, and used for a hobby - well maintained and lightly used.

$120.00   6 months ago
Delta 10" Unisaw (tablesaw) - $120 (silt)

I have no need for this table saw any more. I used it for beam wraps, furniture and cabinets in the past. Trying to make some room in the shop. There's a new Avanti blade. $120 firm


1 2


Last Updated on: March 27, 2017
0.0354080200195
9.53674316406E-7