Free Local Classifieds
Search   in
My Location  
> >

Turret lathe in Tools For Sale

Filter Search
$1,000.00   5 days ago
Warner & swasey #5 turret lathe - $1000 (Concord)

Closing shop. Call or text to set a time to see it. Price is non negotiable

$3,500.00   1 month ago
Ward turret lathe - $3500 (Redding)

Ward combination turret lathe #712" Four jaw chuck, 12" Three jaw chuck, 2 1/2" (bore) hand operated automatic chuck.16" swing, 43" between spindle flange & face of turret, 2 5/8" bore, bar feeder.Additional tooling.Possible trade for ironworker.

$19,000.00   1 month ago
1998 OKUMA LU15 twin Turret CNC LATHE TURNING CENTER WITH TAILSTOCK - $19000

1998 OKUMA LU-15-2SC-600 4 AXIS CNC LATHE TURNING CENTERGood Condition. Under Power. GENERAL SPECIFICATIONS: Swing over saddle 14.96"Max. Turning diameter 14.17"Max. Turning length 23.62"Travels (X1 & X2) 10.24" & 5.50"Travels (Z1 & Z2) 25.20" & 24.21"Spindle bore diameter 2.44"Spindle nose A2-6Spindle motor 30 HPSpindle speeds (2 ranges) 75-4500 RPMTool positions upper 12Tool posi

$900.00   1 month ago
Warner Swasey #4 Turret Lathe - $900 (LaGrande)

Older Warner Swasey #4 Turret lathe , . Has collet nose and 8" chuck , a smaller carriage cross slide block with no tooling. it needs restoration , perfect for manual production shop. Heavy feed capabilities and indexing stops. Looks rusty but is coated with coolant oil and moves freely. Has motor, handles, and levers intact. This lathes can drill a three inch hole in one pass or be set up with mu

Contact Us   2 months ago
turret lathe

warner and swasey turret lathe 36", 18 swing, model #5

$6,800.00   2 months ago
Gisholt Saddle Type Turret Lathe - $6800 (Salem, IN)

30 HP 3 phase motor currently wired for 240 18" 3 jaw chuck6 position turretPower cross slide on saddleTooling not includedGood running accurate machineApprox 18,000 lbs.

$1,530.00   2 months ago
South Bend 16" Powered Turret Tailstock Fits Metal Lathe 6 Position Wi - $1530 (Millstadt, IL)

Used South Bend 16" metal lathe powered turret tailstock. This tailstock is powered by the lead screw and has 6 positions with original stops. It works fine. Weighs around 400 lbs.

$600.00   3 months ago
Morey 2g Metal turret lathe - $600 (West Sacto)

I have a large metal lathe (Morey 2-G ) I picked up a couple years back I started to clean up and swap out the 3 phase motor and never finished 600$....585 029six

$1,530.00   3 months ago
South Bend 16" Powered Turret Tailstock Fits Metal Lathe 6 Position Wi - $1530 (Millstadt, IL)

Used South Bend 16" metal lathe powered turret tailstock. This tailstock is powered by the lead screw and has 6 positions with original stops. It works fine. Weighs around 400 lbs.

$900.00   3 months ago
Warner Swasey #4 Turret Lathe - $900 (LaGrande)

Older Warner Swasey #4 Turret lathe , . Has collet nose and 8" chuck , a smaller carriage cross slide block with no tooling. it needs restoration , perfect for manual production shop. Heavy feed capabilities and indexing stops. Looks rusty but is coated with coolant oil and moves freely. Has motor, handles, and levers intact. This lathes can drill a three inch hole in one pass or be set up with mu

$1,530.00   4 months ago
South Bend 16" Powered Turret Tailstock Fits Metal Lathe 6 Position Wi - $1530 (Millstadt, IL)

Used South Bend 16" metal lathe powered turret tailstock. This tailstock is powered by the lead screw and has 6 positions with original stops. It works fine. Weighs around 400 lbs.

$2,000.00   4 months ago
Warner and swasey 3A turret lathe - $2000 (Elo, mi)

Warner and swasey 3A turret lathe Speed clamp air chuck equipped Many sets of jaws included

$6,800.00   4 months ago
Gisholt Saddle Type Turret Lathe - $6800 (Salem, IN)

30 HP 3 phase motor currently wired for 240 18" 3 jaw chuck6 position turretPower cross slide on saddleTooling not includedGood running accurate machineApprox 18,000 lbs.

Contact Us   4 months ago
Bullard Chuck Jaws for Vertical Turret Lathe, 3 Jaw Chuck, Reversible (Fairfield, CT)

(3) Chuck Jaws for a Bullard Vertical Turret LatheTop JawsReversibleIncludes T slot hold downsCan ship UPSApprox. 80 lbs

$125.00   5 months ago
Surface plate 24" inspection Lathe tool holder turret - $125 (Bandon)

Granite Surface plate 24" $125.00Tool Holder Turret for lathe $75.005c Horizontal vertical fixture import $40.00Snapon Tool Box empty $100.00

$800.00   5 months ago
Hardinge Lathe DSM 59 6 position turret 5C collet spindle Made in USA - $800 (Bandon)

Hardinge DSM 59 2nd operation lathe w 6 position turret 5C collet spindle with Hardinge threaded O.D. for chuck. It has a disc brake stops quickly (weight about 1000LBS)Made in Elmira New York USA

$125.00   5 months ago
Surface plate 24" inspection Lathe tool holder turret - $125 (Bandon)

Granite Surface plate 24" $125.00Tool Holder Turret for lathe $75.005c Horizontal vertical fixture import $40.00Snapon Tool Box empty $100.00

$1,530.00   5 months ago
South Bend 16" Powered Turret Tailstock Fits Metal Lathe 6 Position Wi - $1530 (Millstadt, IL)

Used South Bend 16" metal lathe powered turret tailstock. This tailstock is powered by the lead screw and has 6 positions with original stops. It works fine. Weighs around 400 lbs.

$6,750.00   5 months ago
Okuma Lb-15 Lb15 CNC Lathe 12 Tool Turret Tailstock Hyd Chuck Chip Con - $6750 (Millstadt, IL)

Used okuma lb-15 cnc lathe with 12 position turret, tailstock, hydraulic 3 jaw chuck, and chip conveyor. Machine runs fine and is under power in my shop for inspection. Paint is rough.

$1,530.00   5 months ago
South Bend 16" Powered Turret Tailstock Fits Metal Lathe 6 Position Wi - $1530 (Millstadt, IL)

Used South Bend 16" metal lathe powered turret tailstock. This tailstock is powered by the lead screw and has 6 positions with original stops. It works fine. Weighs around 400 lbs.


1 2 3


Last Updated on: March 23, 2017
0.0185301303864
2.14576721191E-6