Free Local Classifieds
Search   in
My Location  
> >

Shaper in Tools For Sale

Filter Search
$900.00   2 days ago
Rockwell / Delta Overarm & under Router / Shaper - $900 (Eureka)

I have this Over/under arm router that i purchased along with a bunch of other cabinet making equipment. But I have no use for it. it is in working condition but the ON/OFF switch sometimes doesn't work and needs to be replaced. I have the fence and other small attachment for it. This is a cash only transaction, If the post is still visible that means its still available. Call or email me with any

$500.00   3 days ago
DAVIS & WELLS WOODWORKING SHAPER - $500 (DEWEY, AZ)

DAVIS & WELLS WOODWORKING SHAPER, 2 HP, 3 PHASE, 220V, call Mark for info and directions, 6am-5pm. No texts please.

$500.00   3 days ago
DAVIS & WELLS WOODWORKING SHAPER - $500 (DEWEY, AZ)

DAVIS & WELLS WOODWORKING SHAPER, 2 HP, 3 PHASE, W FEED HOLDERS, call Mark for info and directions, 6am-5pm. No texts please.

$700.00   3 days ago
DAVIS & WELLS WOODWORKING SHAPER - $700 (Dewey, AZ)

DAVIS & WELLS WOODWORKING SHAPER ON IRON FLOOR BASE, DAYTON 3 HP/3 PHASE DRIVE MOTOR, 220V, 2.5A, HAS FESTO SELF FEEDER WITH .5 HP MOTOR, TOOLING, $700, call Mark for info and directions, 6am-5pm. No texts please.

$1,000.00   3 days ago
Delta Shaper 3 HP 220 volts - $1000 (Jackson)

Selling a no longer used Delta 3 HP shaper, 220 volts. Comes with extra long shaft (already mounted) with carbide cutters as seen in the photos. We're a cabinet shop who picked up a more capable machine and no longer need this Delta. Serious inquires only.

Contact Us   3 days ago
Shaper cutter from $ 30.00 to $ 300.00 (Des Moines)

All cutters is nice and sharp low used small company

$150.00   4 days ago
Porter Cable shaper table w/ router and stand - $150

Porter Cable shaper table w/ router,router base and stand

$220.00   5 days ago
DELTA 43-110 SHAPER + STAND - $220 (FOUNTAIN VALLEY)

RUNNING DELTA 43-110 SHAPER WITH A STAND FOR SALE. no fence or knives. TOP HAS LOTS OF TAPED HOLES FOR JIGGING. $220 or thom--------------------------------------913

$650.00   5 days ago
Jet Shaper JWS34L Wheel Base 2HP, 230V, single phase perfect Shape - $650 (At my house.)

Jet Shaper JWS34L With Wheeled Base. 2HP, 230V, single phase and in perfect Shape. See Pictures

$1,800.00   5 days ago
Powermatic Shaper Model 27 with accessories - $1800 (Beaumont)

Powermatic Shaper Model 27230 volt 1 phase 5 hp29' x 29.5' tableOriginal 1-1/4" spindle assemblySpare spindle assembly with 1/2',\and 3/4" spindlesSplit sleeve 1/2" router bit adapterHigh End Glue Joint cutter (Laguna)Many other cuttersCustom made fenceMounted on castersWeighs ~450 lbsExcellent conditionLightly usedLocal pick up onlyI can help load it onlyAsking price for all $1800.00Not selling p

Contact Us   5 days ago
Carbide Shaper Cutters and High-Speed Steel Cutters

New Carbide Shaper Cutters - 3/4" bore41 High-Speed Steel Cutters - 1/2" bore, used for short runs of molding for repair workI have over 300 Sets HSS Cutters all Hand Groud 5/16 &. 3/8 " of an inch Thick Old Style Cutters. But they all still work . I Also have a lot of Flat Bar Stell Bevel Edge to make you own shaper KnifesBar Stell is 25" long & some are 36" to over 40" Long Made Sheffiel

Contact Us   5 days ago
Kitchen Door Shaper Set and Raised Panel. NEW <<<

Kitchen Door Shaper Set and Raised Panel - Used on a Shaper. 1-3- horse Power1. Bosch brand 1/2" and 3/4" shaper set, carbide set, never used. 2. Carb-tech tounge and V groove paneling set, never used. I have (41) Shaper Cutter with a 1/2" bore HSS. Great for Antique repair Work .<<<<<<<

Contact Us   5 days ago
Carbide Shaper Cutters and High-Speed Steel Cutters

New Carbide Shaper Cutters - 3/4" bore41 High-Speed Steel Cutters - 1/2" bore, used for short runs of molding for repair workI have over 300 Sets HSS Cutters all Hand Groud 5/16 &. 3/8 " of an inch Thick Old Style Cutters. But they all still work . I Also have a lot of Flat Bar Stell Bevel Edge to make you own shaper KnifesBar Stell is 25" long & some are 36" to over 40" Long Made Sheffiel

Contact Us   5 days ago
Kitchen Door Shaper Set and Raised Panel

Kitchen Door Shaper Set and Raised Panel - Used on a Shaper. 1-3- horse Power1. Bosch brand 1/2" and 3/4" shaper set, carbide set, never used. 2. Carb-tech tounge and V groove paneling set, never used. I have (41) Shaper Cutter with a 1/2" bore HSS. Great for Antique repair Work .<<<<<<<

$400.00   2 weeks ago
Grizzly Shaper - $400 (Glennie)

Shaper and numerous bits with bushings/bearings and extended fence.

$2,000.00   2 weeks ago
Smith & Mills 16" shaper - $2000 (Douglas)

Smith & Mills shaper. 16" 5hp 3phase excellent condition. $2000Jay. 321 4472

$800.00   2 weeks ago
2 reliant 3 HP wood shaper weaver arch top door jigs. - $800 (Greers ferry AR)

I have 2 reliant heavy duty 3hp 1ph 220v wood shapers they each come with a 1/2 - 3/4 & 1" spindle I'll take $450 each or buy both for $800. They are located in Prim Arkansas that is close to the Greers Ferry lake about 3 hours from Memphis.The last picture is a set of weaver jigs for arch top raised panel doors it will come with some templates also asking $375 for them.

$595.00   2 weeks ago
Davis & Wells Shaper - $595 (Days Creek, OR)

Davis & Wells Shaper - 1" spindle - 5 hp - 220 volt - 3 phase - single speed machine - factory cast iron table 30" wide X 21" deep - wood table w/ formica 40" wide X 18 1/2" in front of spindle

$2,000.00   2 weeks ago
Powermatic Shaper - $2000 (Statesboro)

Model number 26PS, 3hp motor, 1 phase, 1" spindle that raises and lowers (runs on air compressor), fence, great shape for age. Have a few cutters to go with it.

$2,000.00   2 weeks ago
Powermatic Shaper Table's - $2000

I have two router tables that I do not need anymore and would like to sell them to somebody who could use them. Selling each one for $2000. Model and serial no. are included in the pictures. Please contact Eric at and ask for Eric if you are interested or have any questions.Thanks


Previous 1 2 3 4 5 6 7 8 9 ... 33 Next


Last Updated on: August 17, 2017
0.0197899341583
2.14576721191E-6