Free Local Classifieds
Search   in
My Location  
> >

Riser blocks in Tools For Sale

Filter Search
$2,500.00   3 weeks ago
Cincinnati No. 2 Cutter/Tool Grinder - $2500 (Champlain, NY)

This is a very nice, well maintained Cincinnati No. 2 Cutter & Tool Grinder. It was owned by one shop that has decided to downsize and move some equipment. It comes loaded with tools and accessories.- Weldon Model 200 Air Bearing workhead spindle - comes with original tool box and all necessary collets and accessories. - Heavy Duty double angle workhead- Riser blocks- Centers/tailstocks- Diamo

$175.00   1 month ago
Cadillac Height Gage - $175 (Chicopee)

Height gage 6" with 2 - 6" riser blocks, up to 18" in height. I checked these out with class B gage blocks.Gage bolcks Mitutoyo serial # 20073 Date 11/10/2017Indicator Brown Sharpe serial # #7033-3 Date 8/1/2017Base Brown Sharpe serial # 599-585 Surface plate Brown Sharpe 6/13/2019SIZE MEASUREMENT 0.50000 0.50000 1.50000 1.50000 2.50000 2.50000 3.50000 3.49995 4.50000 4.50000 5.50000 5.49995

$6,000.00   2 months ago
Machinist/Tool Maker Tool Set - $6000

These are the tools I made my living with up until two years ago, when I went to doing mechanical design work full-time instead. Everything is good quality, well maintained, and fully functional. See pics and list below for inventory. The itemized items in the list come to over $7,300 if you were to purchase new. Add up all of the misc. tools -- end mills, drill bits, c'sinks, c'bores, lathe tools

$6,000.00   2 months ago
Machinist/Tool Maker Tool Set - $6000

These are the tools I made my living with up until two years ago, when I went to doing mechanical design work full-time instead. Everything is good quality, well maintained, and fully functional. See pics and list below for inventory. The itemized items in the list come to over $7,300 if you were to purchase new. Add up all of the misc. tools -- end mills, drill bits, c'sinks, c'bores, lathe tools

$6,000.00   2 months ago
Machinist/Tool Maker Tool Set - $6000

These are the tools I made my living with up until two years ago, when I went to doing mechanical design work full-time instead. Everything is good quality, well maintained, and fully functional. See pics and list below for inventory. The itemized items in the list come to over $7,300 if you were to purchase new. Add up all of the misc. tools -- end mills, drill bits, c'sinks, c'bores, lathe tools

$6,000.00   2 months ago
Machinist/Tool Maker Tool Set - $6000

These are the tools I made my living with up until two years ago, when I went to doing mechanical design work full-time instead. Everything is good quality, well maintained, and fully functional. See pics and list below for inventory. The itemized items in the list come to over $7,300 if you were to purchase new. Add up all of the misc. tools -- end mills, drill bits, c'sinks, c'bores, lathe tools

$1,250.00   7 months ago
F. & J. Barnes Co. Antique No. 4 1/2 9" Metal Lathe with accessories - $1250 (Nixa, MO)

I'm downsizing my shop, and making room for other tooling. This listing is for a F. & J. Barnes Co. metal lathe from Rockford, IL made in the 1890's. I am only the third owner, and as you can see from the pictures it is in great condition especially for it's age. I believe it has all the change gears for making different threads. It has lots of accessories, including a full set of three riser

$600.00   8 months ago
Delta 28-245 14" Bandsaw w/ Upgrades - $600 (Twain Harte)

Delta 28-245 14" Bandsaw with many bonuses and upgrades:• Single Owner, well cared for, lightly used• Upgrade to 1hp motor• 7" riser block kit -- 12" resaw capacity• New urethane tires• Magnetic on/off switch• Ceramic guide blocks• EZ turn tension control• New Timberwolf 3/4, 1/2 and 1/4" bladesI also have a 3/4" carbide-tipped resaw blade that's nearly new. They're $150 on Amazon,

$1,000.00   8 months ago
Lift - $1000

6000# drive on pad lift. works great, comes w/riser blocks.

$600.00   9 months ago
Kennedy machinist tool box - $600 (Somerset)

I have a nice Kennedy machinist box for sale. 8 drawer top box with the 2 drawer riser, a 5 drawer roll around bottom box with the storage lid in the bottom and also has the fold out shelf on the end. $600 I also have a set of 1-3 inch mics, 6 inch mitutoyo calipers, 1-3 inch starret depth mics, 5 123 blocks, mitutoyo dial indicator and a complete gauge block set. I would sale everything $800

$1,295.00   10 months ago
LOW RISE VEHICLE LIFT "NEW" 6,000 LB CAPACITY - $1295 (HAYWARD)

The LR06 is a Low-Rise parallel style 6,000 lb. capacity vehicle lift with a 110 volt/1H.P. power unit that lifts the unit to full height in thirty seconds. The LR06 minimum height for drive on is 4" and a lifting height of 24"-27" based on the rubber pads that come with the lift and the position they are placed at under the vehicle. This is an ideal vehicle lift for quick tire, brake or wheel ser

$1,295.00   10 months ago
LOW RISE VEHICLE LIFT "NEW" 6,000 LB CAPACITY - $1295 (HAYWARD)

The LR06 is a Low-Rise parallel style 6,000 lb. capacity vehicle lift with a 110 volt/1H.P. power unit that lifts the unit to full height in thirty seconds. The LR06 minimum height for drive on is 4" and a lifting height of 24"-27" based on the rubber pads that come with the lift and the position they are placed at under the vehicle. This is an ideal vehicle lift for quick tire, brake or wheel ser

$300.00   11 months ago
Powermatic Benchtop Mortiser - $300

Powermatic model 701 benchtop mortiser. Includes 1/4", 3/8", 3/4" chisels/drills and a set of riser blocks. $300.

$500.00   1 year ago
Pilot orbital Pipe Cutter/Groover - $500 (Blandon)

Pilot Orbital Pipe cutter/Groover tool. Model 5612. Includes latching wooden storage box, attachments for different size pipe, spare cutting/grooving blades, paperwork, and the tool. Extra springs and balls included for grooving tool (not pictured). In good lightly used condition. Features automatic censoring using quick change riser blocks for different size piping, universal power input, rugged

$365.00   1 year ago
14" bandsaw with 6" riser, mobile base etc - $365

Reliant 14" bandsaw with a 6" riser - gives a total cutting height of 12" for re-sawing. Miter gage and rip fence. HTC mobile base. Includes roller guides (upgrade from friction blocks), chromed handwheel (upgrade from stock belt tension knob), upgraded tension spring, dust port and 3 blades.I used this to prep raw wood for pen making and have not used the saw in several years. It was sold by Wood

$750.00   1 year ago
Pilot orbital Pipe Cutter/Groover - $750 (Blandon)

Pilot Orbital Pipe cutter/Groover tool. Model 5612. Includes latching wooden storage box, attachments for different size pipe, spare cutting/grooving blades, paperwork, and the tool. Extra springs and balls included for grooving tool (not pictured). In good lightly used condition. Features automatic censoring using quick change riser blocks for different size piping, universal power input, rugged


1


Last Updated on: November 19, 2017
0.0271680355072
3.09944152832E-6