Free Local Classifieds
Search   in
My Location  
> >

Hypertherm in Tools For Sale

Filter Search
$10.00   1 day ago
HYPERTHERM POWERMAX 30 Consumables - $10 (East Wenatchee)

Calls only - NO TEXT'S1 - NEW 30A ELECTRODE #2204781 - NEW NOZZLE # 2204803 - NEW O-RINGSAND MISCELLANEOUS USED CONSUMABLESALL FOR $10.00

$29,500.00   2 weeks ago
One New Hypertherm Power Unit 400XD - $29500 (SMF & Machine Tools)

Mild Steel Cut Capacity Dross Free: 38mm (1-1/2") Production Pierce: 50mm (2") Max. Cutting Capacity: 80mm (3.2") Stainless Steel Cut Capacity Production Pierce: 45mm (1-3/4") Max. Pierce: 75mm (3") Max. Cutting Capacity: 80mm (3.2") Speed (Mild Steel) Book Specification at Highest Output Current 12mm (1/2") 4430mm/m (170 ipm) Cut Angle ISO 9013 Range 2-4 Weldability Ready to weld Process Amps (cu

$1,000.00   2 weeks ago
Hypertherm 45 plasma cutter - $1000 (South dayton)

Plasma cutter not for beginners very low hours only 1 year old always kept inside a house never left outside after use was $1800 brand new only asking $1000 or best offer

$15,900.00   2 weeks ago
One New Hypertherm Power Unit 130XD - $15900 (SMF & Machine Tools)

Mild Steel Cut Capacity Dross Free: 16mm (5/8") Production Pierce: 32mm (1-1/4") Severence (edge starts): 38mm (1-1/2") Stainless Steel Cut Capacity Production Pierce: 20mm (3/4") Severence (edge starts): 25mm (1") Aluminum Cut Capacity Production Pierce: 20mm (3/4")

$29,500.00   3 weeks ago
One New Hypertherm Power Unit HPR 400XD - $29500 (SMF & Machine Tools)

Mild Steel Cut Capacity Dross Free: 38mm (1-1/2") Production Pierce: 50mm (2") Max. Cutting Capacity: 80mm (3.2") Stainless Steel Cut Capacity Production Pierce: 45mm (1-3/4") Max. Pierce: 75mm (3") Max. Cutting Capacity: 80mm (3.2") Speed (Mild Steel) Book Specification at Highest Output Current 12mm (1/2") 4430mm/m (170 ipm) Cut Angle ISO 9013 Range 2-4 Weldability Ready to weld Process Amps (cu

$15,900.00   3 weeks ago
One New Hypertherm Power Unit 130XD - $15900 (SMF & Machine Tools)

Mild Steel Cut Capacity Dross Free: 16mm (5/8") Production Pierce: 32mm (1-1/4") Severence (edge starts): 38mm (1-1/2") Stainless Steel Cut Capacity Production Pierce: 20mm (3/4") Severence (edge starts): 25mm (1") Aluminum Cut Capacity Production Pierce: 20mm (3/4") Severence (edge starts): 25mm (1")

$15,900.00   3 weeks ago
One New Hypertherm Power Unit 130XD - $15900 (SMF & Machine Tools)

Mild Steel Cut Capacity Dross Free: 16mm (5/8") Production Pierce: 32mm (1-1/4") Severence (edge starts): 38mm (1-1/2") Stainless Steel Cut Capacity Production Pierce: 20mm (3/4") Severence (edge starts): 25mm (1") Aluminum Cut Capacity Production Pierce: 20mm (3/4") Severence (edge starts): 25mm (1")

$400.00   4 weeks ago
Hypertherm 190c Plasma Cutter - $400 (Macungie)

I'm selling my Hypertherm 190c unit because I never use it anymore. This unit is great for small jobs and convenient because it has its own on board air and requires no compressor hook up. Comes with some extra consumables and is ready to go.

$1,150.00   1 month ago
Hypertherm Powermax 380 Plasma Cutter - $1150 (Leesburg)

make / manufacturer: Hyperthermmodel name / number: Powermax 380Comes with brand new motor guard filter. Some consumables. Ready to use. Needs a compressor that can put out at least 60psi @ 4.5 scfm. Can be switch from 110 to 220 VAC. Has 110v 12awg cord on currently. Comes with cart.

$2,000.00   1 month ago
PLASMA CUTTER HYPERTHERM 45XP - $2000

HYPERTHERM 45XP plasma cutterHYPERTHERM IS KNOWN AS THE FINEST PLASMA CUTTER THERE IS AND FROM WHAT LITTLE I USED IT THEY ARE RIGHTI BOUGHT THIS LAST MONTH AND HAVE CHANGED DIRECTIONS AND DONT NEED NOWUSED ABOUT TWENTY MINUTESCOMES WITH THESE CONSUMABLES FOR GOUGEING - REGULAR AND FINE CUT NOZZLES AND MARKING NOZZLESCHECK IT OUT AT hypertherm.com

$3,000.00   1 month ago
Hypertherm 85 Plasma Cutter- New - $3000 (Lansing)

New never used. Cuts any type of Metal, Stainless, Mild Steel, Aluminum, etc......Great for Plasma Table Machine, but comes Hand Torch. Runs on 220, single phase. Comes with consumables in separate case. 25 ft lead.If interested call :

$1,400.00   1 month ago
$1,000.00   2 months ago
Hypertherm powermax 600 plasma cutter - $1000 (Hartford)

Like new condition. Extra new consumables. 220v works great. Comes with original booklets as well.

$999.00   2 months ago
Hypertherm Powermax 190C Plasma Cutter - $999 (New Bern. NC)

For sale:1 used Hypertherm Powermax 190C Plasma Cutter.$999Ask for Drew or Brad, and be sure to mention seeing this ad on Craigslist!East 70 Pawn3317-B HWY 70 EastNew Bern, NC 28560Store Hours: M-F 9AM-6PM, SAT 9AM-3PMwww.east70pawn.comLike us on Facebook!

$45,000.00   3 months ago
Plasma Cutter and Hypertherm Powermax - $45000 (Alma)

Contact by phone or email.Certified Check Only.Link to website with all info below.http://www.koike-asia.com/en/cnc-machine/datasheet/monograph/https://www.hypertherm.com/en-US/hypertherm/powermax/powermax105/Located in Waycross, Georgia.

$700.00   3 months ago
PLASMA Hypertherm 190c with built in compressor - $700 (seaside)

Hypertherm Powermax 190CThe Hypertherm 190C is a fine little plasma cutter. The main feature of this unit is portability. All you need is 120vac electrical power and you can cut. The built in air compressor satisfies the air requirement and makes it a convenient cutting machine as long as you use it within its designed cut capacity. Cutting 1/8 this little cutter will make you proud. Cutting 3/16t

$1,200.00   3 months ago
HYPERTHERM PLASMA CUTTER 600 - $1200 (MEMPHIS TN)

(HYPERTHERM 600) 240 VOLTS CUTS 1/4 TO 1/2 METAL 1200 CASH OR BEST OFFER 901 275- 60 SIX SEVEN

$1,200.00   3 months ago
HYPERTHERM PLASMA CUTTER 600 - $1200 (MEMPHIS TN)

HYPERTHERM PLASMA CUTTER 600 SINGLE PHASE 220 VOLT CUTS 1/4 T0 1/2 INCH STEEL $ 1200 CASH 901-275 SIX 0 SIX SEVEN

Contact Us   3 months ago
PLASMA CUTTER, HYPERTHERM (Rockford)

Like new, maybe 20 min. running time. This is a Hypertherm Powermax 30XP. Hypertherm is the leading maker of plasma cutters in the U.S., plasma cutters are their only product. Included is plenty of new consumables, a "Hyaccess"kit for hard to reach places, circle cutting guides, air regulator, Motor Guard air dryer, a mig welder cart with the tank holder cut off because it was not needed for this

$1,500.00   3 months ago
Hypertherm max 100 plasma cutter - $1500 (McGraw)

For sale or trade, I got a good deal on this hypertherm max 100 plasma cutter with the intention of fixing and selling it. The repair was done at chenango welding in Norwich NY at a little over $1000 bucks! They appraised it between 3500-4000. I'm asking 1500!!this is set up for hand held use but can be installed on a computer controlled machine. I have approximately $175 in consumables. This is a


1 2 3 4 5 6 7


Last Updated on: January 17, 2017
0.0255990028381
1.90734863281E-6