Free Local Classifieds
Search   in
My Location  
> >

Delta table saw in Tools For Sale

Filter Search
$200.00   2 days ago
Delta table saw - $200 (Prescott)

I have a delta table saw industrial works great, for any shop!Comes with new blades. Finish and rough blades, Looking to sell so i can by a smaller one, to big and heavy to tote around. Need it gone asap!!

$250.00   3 days ago
Delta Homecraft Table Saw (Offers?) - $250 (Springfeild, Oregon)

This was my Stepfathers from Sears way back.Includes new Dado Blade kit, and wooden roller table, angle miter attachment, wrench and anything else I can find for it.Text me at Five41-525-one737OFFER considered. (No plastic) Local only please.CASH only.No Shipping.No help needed selling.

$100.00   3 days ago
Delta 10' table saw - $100 (Elite Pawn)

Located at Elite Pawn on the corner of miller and milgen! Asking $100

$1,200.00   3 days ago
Delta 12 14 table saw - $1200 (Lewistown)

12-14" blade, 5 hp single phase 220 volt. Table is 48" wide by 38" deep. Saw is in great shape needs nothing. Has a sharp 8 inch Amana Dado stack with it and a 12" blade.These were the best saws delta ever made. It's the unisaw's big brother. Saw is under power and can be tested.Loading is available.

$300.00   3 days ago
Delta Table Saw - $300

Delta 36-600 Table Saw10" Blade with tilting arborOlder saw in very good shape, very strongMost air gaps have been taped and shop made plenum collects almost all dust, much better than normal contractor saws. Comes with HTC mobile adjustable mobile base with leveling feet. Blade not included.

$800.00   4 days ago
Delta Table Saw - $800 (Spirit Lake, Ia)

34-445 10" table saw with a 30" unifence-1.5 hp 115/230 single phase motor-excellent shape runs great-I bought new from Stan Houston in Sioux Falls

$400.00   4 days ago
1940'S DELTA TABLE SAW JOINTER COMBO - $400 (CASPIAN)

FOR SALE: 1940S DELTA TABLE SAW MODEL TCS-203 10" BLADE WITH A DELTA 6" JOINTER MODEL NJ 226. BOTH AND IN GOOD CONDITION AND INCLUDES MOTOR, THEY WHERE SOLD HAS A SET AND RUN OFF OF THE SAME MOTOR. WE DID NOT TEST THE MOTOR (IT NEEDS A NEW CORD TO TEST). THE RIP FENCE IS NICE AND WORKS GOOD. THERE IS A CRACK IN THE BASE OF THE JOINTER THE WOULD NEED REPAIR (SEE PHOTOS) OTHER THAN THAT IT LOOKS TO

$600.00   4 days ago
DELTA TABLESAW 10 Inch 1.5 hp 110/220 Volt 1 Owner TABLE SAW ACCESSORI - $600 (TWIN FALLS)

A strong saw, contractor style tablesaw in great condition, 1 owner.Set up for 220volt Easily set to 110 volts.A dado blade set included.Always been inside the garage.MAKE AN OFFER or trade for old Idaho items, old photographs, letters, documents, trade tokens etc.Note: This telephone does not text.

$425.00   4 days ago
Delta "Unisaw Junior" Table Saw - $425 (Prineville)

For sale, a 1949 - 1951 Delta Milwaukee 8" table saw. These saws were only built for about three years and are quite rare. This one is the only one I have ever seen. Has an original Delta 3/4 hp. motor that must weigh about 50 lb. All the working parts like raise/lower and tilt gears are in great shape and work smooth. New arbor bearings, belt, cord, switch and paint. 65 + years old and with care

$200.00   5 days ago
New! DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard - $200 (Cedar Park Leander)

DELTA 34-976 Deluxe Uniguard Table Saw Blade GuardNew in box$200 The DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard fits DELTA 10-inch Unisaws and Contractor's Saws, and has an innovative, overhead design that doesn't have a mounting bracket behind the blade to interfere with dado cutting or molding operations. The operator remains protected for non-through cutting operations since the blade g

$300.00   5 days ago
Delta 10" Table Saw - $300 (PICAYUNE, MS)

I'm selling this 10" Delta table saw that I no longer use. Price is 300.00 firm t04-401-1109 ken

$400.00   1 week ago
Delta table saw - $400

Delta table saw with extra wide fence works great.

$40.00   1 week ago
Vintage Delta Table Circular Saw 7 1/4" Small Portable - $40 (Grand Coulee, WA)

Vintage Delta Table Circular Saw 7 1/4" Small Portable - Model NCS-20 - Size 19" x 15" x 12" - (No Motor or Cart)Asking $40.00 If interested, give me a Call leave message, I am returning calls. ThanksNo emails or texts

$40.00   1 week ago
10" DELTA TABLE SAW - $40 (Montague)

10" Delta Table Saw in good condition. $40.00

$200.00   1 week ago
Delta 34-450 10" 3Phase Table Saw (Unisaw) with Static Phase Converter - $200 (Mercer)

Listed is a Delta 10" Unisaw. A static phase converter is included so it can be wired to 240V. Does not contain the motor or side cover for the bullet motor. Have equipment to load if necessary.

Contact Us   1 week ago
Fence table saw delta (Suffolk)

Fits table saw 36-540 type 2. Missing handle but bolt works fine. Used good condition and I couldn't find one elsewhere Asking $25. Also check other ads by this user

$2,500.00   1 week ago
DELTA 10" RT31 TABLE SAW - $2500 (BENNET,NE)

Delta 10" table saw RT31 with scoring blade. 3 HP,1 PH,230V,3450 RPM. 52" unifence and new belts. Runs great.

$450.00   1 week ago
Delta 10inch table saw - $450 (Fostoria)

Delta 10inch contractor table saw. 34 inch fence cut. Excellent condition. Brand new blade and have a few extra that can go with it. Ran it on 220 but hooked it back to 120. Great saw but upgraded to something bigger 450 obo. Text or email

$450.00   1 week ago
14" rockwell - delta table saw - $450 (vandaila)

14" rockwell - delta table saw 240v three phase

$200.00   1 week ago
Delta 34-450 10" 3Phase Table Saw (Unisaw) with Static Phase Converter - $200 (Mercer)

Listed is a Delta 10" Unisaw. A static phase converter is included so it can be wired to 240V. Does not contain the motor or side cover for the bullet motor. Have equipment to load if necessary.


Previous 1 2 3 4 5 6 7 8 9 ... 29 Next


Last Updated on: January 18, 2018
0.0301809310913
1.90734863281E-6