Free Local Classifieds
Search   in
My Location  
> >

Dake in Tools For Sale

Filter Search
$5,000.00   6 days ago
Dake 150 ton press - $5000 (Tylertown)

I have a Dake air/hydraulic press for sale. This machine operates the hydraulic system by the oil pumps actuated by air. It weighs a bit over 3000 lbs and frankly is one hell of a machine. I have a 80 ton already and is more than enough for my work. It's a machine I really debate on selling it or not but the 80 ton was homemade by my late grandfather so I feel the need to keep it for reasons other

$8,000.00   3 weeks ago
Dake 150 ton forklift tire press - $8000 (Thomasville)

This press is in excellent condition with very little use. I bought several pieces of heavy machinery and I just don't have much use for it.

$950.00   1 month ago
$2,600.00   1 month ago
Dake 50H Hydraulic Shop Press 50 Ton H Frame With Original Tooling & P - $2600 (Millstadt, IL)

Used Dake 50h 50 ton hydraulic press with original tooling plus extra heavy steel blocks. The press works fine as does the gage. The head rolls side to side and the screw takeup works well. It has minor seepage around housings. Has cable raise with original handle. Frame is straight.

$225.00   1 month ago
Dake arbor press - $225

Dake arbor press No 01-1/2 ton

$2,600.00   1 month ago
Dake 50H Hydraulic Shop Press 50 Ton H Frame With Original Tooling & P - $2600 (Millstadt, IL)

Used Dake 50h 50 ton hydraulic press with original tooling plus extra heavy steel blocks. The press works fine as does the gage. The head rolls side to side and the screw takeup works well. It has minor seepage around housings. Has cable raise with original handle. Frame is straight.

$3,900.00   3 months ago
DAKE ARBOR PRESS - $3900 (Bowling Green, Oh.)

"DAKE". 75 ton "Elec-Draulic" arbor press. In good condition. Ready to go to work. $3900.00. OBO. NO-EMAILS!!! Will not respond! Call show contact info

$3,900.00   3 months ago
DAKE ARBOR PRESS - $3900 (Bowling Green, Oh)

"DAKE". Model 5-075 "Elec-draulic" 75 ton press. Ready to go to work for your big jobs. $3900.00. OBO. NO-EMAILS!!! Call show contact info

$12,500.00   3 months ago
DAKE 150 ton h frame hydraulic arbor press machine electric powered 5- - $12500

DAKE 150 ton h frame arbor press.unit is in good shapereplacement cost is aprox $20,000MADE IN USADESCRIPTION:AN ADVANCED DESIGN, SINGLE-ACTING PRESS WITH FINGERTIP CONTROLSPECIFICATIONS:CAPACITY: 150 TONSWIDTH BETWEEN UPRIGHTS: 48"WIDTH BETWEEN TABLE CHANNELS: 12 1/4"MINIMUM RAM TO TABLE: 10"MAXIMUM RAM TO TABLE: 30"RAM SPEED-ADVANCE: 16RAM SPEED-PRESS: 2 3/4RAM TRAVEL: 16"HORIZONTAL WORK-HEAD TR

$150.00   3 months ago
Dake Arbor Press - $150 (Dunnellon)

good working condition. Dake No 1 is a 3 ton max capacity. Good for pressing out bearings and such. $150 offer/trade.

$100.00   4 months ago
dake arbor press #1 - $100 (blomingdale,ga)

dake arbor press #1 $ 100.00 or offer show contact info4

$1,450.00   4 months ago
Dake 10 ton dual action hydraulic press - $1450 (Elizabeth)

Selling my lightly used 10 ton H-Frame hydraulic press with dual-action(DA) joystick. I bought it new from Dake Corporation a couple of years ago to bend steel and aluminum with a custom die(for a sculpture project). It is 110 volt single phase and very quiet to operate. All the specs for the DAKE Force 10DA can be found at:http://www.dakecorp.com/products-detail.asp?section=models&page=Dura-Press

$2,000.00   4 months ago
Press Dake 50 ton - $2000 (Harrison, OH)

Dake hydraulic press. Used in great shape. Very strong. 50 Tons. Ready to use. Can try out.

$900.00   5 months ago
Cold Saw - Metal Cutting Saw - DAKE Brand - $900 (Grand Forks)

We have a used cold saw for sale. It is 3-Phase input power on the electrical. Dake Brand. In transport the back cover on the motor was damaged and will need to be repaired or replaced. The cost from Dake for a new cover is $78.00. Asking $900.00 for the saw. Call show contact info The picture in the ad of the saw is from the internet.......the saw we have for sale is not new and has had some use.

$2,000.00   5 months ago
Press Dake 50 ton - $2000 (Near Harrison)

Dake hydraulic press. Used in great shape. Very strong. 50 Tons. Ready to use. Can try out.

$2,000.00   5 months ago
Press Dake 50 ton - $2000 (Near Harrison)

Dake hydraulic press. Used in great shape. Very strong. 50 Tons. Ready to use. Can try out.

$11,500.00   5 months ago
One Preowned Dake MEP Non-Ferrous Cold Saw - $11500 (SMF & Machine Tools, Inc.)

Model: Cobra 350 CNC FE, Year: 1995Specifications: Cutting capacity 90 hollow; 4-3/4" round; 4" square; 7" x 2-3/4" rectangle; Cutting capacity 90 solid: 3-1/2" round; 3" square; 3" x 3" rectangle; Cutting capacity 45 (L & R) hollow: 4-1/2" round; 3-3/4" square; 2" x 3" rectangle; Cutting capacity 45 (L & R) solid; 3" round; 2" square; 2" x 3' rectangle; Cutting capacity 45 tilted hollow: 2" round

$3,250.00   5 months ago
Dake 75 hydraulic press - $3250 (Kalamazoo) hide this posting restore this posting

Up for sale is a Dake 75H hydraulic hand press. Press works great. The business has bought a new press and no longer uses this one. Located at a business in Battle Creek near the airport. Email with questions or to set up a time to check out the press. Cash only

$75.00   6 months ago
$500.00   6 months ago
DAKE 3-Ton Capacity Heavy Duty Arbor Press Model No. 1-1/2 - $500 (Plainwell, MI) hide this posting restore this posting

CALL/TEXT is the best way to reach me....Thank You!!DAKE 3-Ton Capacity Arbor Press Model No. 1-1/2!....Great working condition!....This is the "Old School" model made in Grand Haven Michigan USA!....SAVE YOURSELF SOME $$$$!....Please feel free to contact me by phone/text (preferably) - (269) nine nine eight - 7127....ANY spam calls/texts will be reported!


1 2


Last Updated on: December 4, 2016
0.652770996094
2.86102294922E-6