Free Local Classifieds
Search   in
My Location  
> >

Cutting table in Tools For Sale

Filter Search
Contact Us   Today
CNC Plasma Cutting System with Water Table (Chowchilla CA)

All-Steel Tubular Frame Construction - 4 x 4 • 4 x 8 • 5 x 10 Cutting TablesTable is Built to Hold Water for Smoke and Particle ReductionDrain Tank, Water Pump, and PlumbingPC Base Controller w/ Mach 3 SoftwareSoftware that works with WindowsBrand New Lap Top ComputerSoft Touch Plate SensingAutomatic Torch Height ControllerY-Axis DriveZ-Axis DriveDual X-Axis DrivesV-Rails with Guide WheelsRack

$400.00   2 weeks ago
Siding cutting table - $400

Van mark siding cutting table for sale. New they are selling for 900.00, asking 400.00 or best offer. Don't waste your time with low ball offers

$25.00   1 month ago
8 1/2 inch Compound Miter Saw setup on cutting table - $25 (Belgrade)

8 1/2 inch Compound Miter Saw setup on cutting table. Great system for 2x4 framing! Easily loads into a pickup. Works great, just getting old and weathered. Call 388 one367 Leave a message if we do not pickup.

$21,500.00   1 month ago
4X8 CNC Plasma Cutting Water Table - $21500 (McCall, ID)

4X8 CNC Plasma Cutting Water Table 21,5004X8 CNC Plasma Cutting Water Table, lightly used as a demo in our facility, w/Drain Tank and Computer. The water greatly reduces smoke, and helps keep the steel from warping. This machine cuts up to 55" wide and 105" long; and has automatic torch height control. This is not a kit. No assembly required. Located at B & B Systems in McCall, ID. $21,500 For mor

Contact Us   1 month ago
CNC Plasma Cutting System with Water Table (Byron, CA)

All-Steel Tubular Frame Construction - 4 x 4 • 4 x 8 • 5 x 10 Cutting TablesTable is Built to Hold Water for Smoke and Particle ReductionDrain Tank, Water Pump, and Plumbing PC Base Controller w/ Mach 3 SoftwareSoftware that works with WindowsBrand New Lap Top ComputerSoft Touch Plate SensingAutomatic Torch Height ControllerY-Axis DriveZ-Axis DriveDual X-Axis DrivesV-Rails with Guide WheelsRac

$50.00   1 month ago
Pro-Edge Saw Table/Cutting Station - $50 (Sedalia, KY)

Pro-Edge Saw Table/Cutting Station $50

$200.00   3 months ago
Cutting Table-Aluminum - $200 (York)

Company selling all tools-must see...

Contact Us   3 months ago
CNC Plasma Cutting System with Water Table (Byron, CA)

All-Steel Tubular Frame Construction - 4 x 4 • 4 x 8 • 5 x 10 Cutting TablesTable is Built to Hold Water for Smoke and Particle ReductionDrain Tank, Water Pump, and Plumbing PC Base Controller w/ Mach 3 SoftwareSoftware that works with WindowsBrand New Lap Top ComputerSoft Touch Plate SensingAutomatic Torch Height ControllerY-Axis DriveZ-Axis DriveDual X-Axis DrivesV-Rails with Guide WheelsRac

$23,000.00   3 months ago
4x8 CNC Plasma Cutting Water Table - $23000 (McCall, ID)

Brand New 4X8 CNC Plasma Cutting Water Table,w/Drain Tank and Computer. The water greatly reduces smoke, and helps keep the steel from warping.This machine cuts up to 54" wide and 103" long; and has automatic slow down for holes and corners.This is not a kit. No assembly required.Located at B & B Systems in McCall, ID.$23,000For more info, videos, or specs go to http://www.cncsteelcutting.com

$26,000.00   3 months ago
5X10 CNC Plasma Cutting Water Table - $26000 (McCall, ID)

Brand New 5X10 CNC Plasma Cutting Water Table, w/Drain Tank and Computer. The water greatly reduces smoke, and helps keep the steel from warping. This machine cuts up to 62" wide and 133" long; and has automatic slow down for holes and corners. This is not a kit. No assembly required. Located at B & B Systems in McCall, ID. $26,000 For more info, videos, or specs go to http://www.cncsteelcutti

$2,900.00   3 months ago
Tippmann Clicker 1500 die cutting machine and table - $2900

Light use, used only for sampling, project is complete so no longer need. Delivers 15 tons of cutting pressure on many types of materials. Visit Tippmannclicker.com for more about machine and lots of cutting example videos on YouTube. VERY HEAVY. 560 pounds, pick up only

$240.00   3 months ago
Cutting & Welding table with huge vice, and water trays - $240

I have for sale a welding set-up and cutting table with water trays to absorb the slag when cutting with a plasma cutter. There is an anvil Vice mounted on the table and a tower for holding mig welder, acetylene & plasma cutter leads. It measures 56" x 23". The cutting grates are replaceable and I have eight extra garages at $15 each. If you buy the table and all the replacement grates I will

$500.00   3 months ago
Greene Manufacturing Inc Downdraft plasma cutting table - $500 (Bayview, Texas)

Like new downdraft plasma cutting table. Text Would work great for any cutting or welding. Can attach an exhaust hose and fan to pull smoke, fumes away from work area. 2 available.

$1,900.00   3 months ago
Granite Fabrication/Cutting Tilt Table - $1900 (colorado springs)

*BRAND NEW* SG 8T Hydraulic-Pneumatic Granite Tilting TableThe SG 8T Hydraulic-PneumaticGranite Tilting Table is made in the USA. With a tested slab capacity of 141x80", and a tested weigh capacity of 16,000 pounds, the SG 8T Granite Tilting Table is built to last a lifetime, delivering quality performance for years to come.Dimensions: Base Table Measurements: 50.75" x 50.75" x 31" (height)Overall

$800.00   3 months ago
Radial Arm Saw w/ Cutting Table - $800 (Greer)

Sears 10" Radial Arm Saw in excellent condition.Custom built work table with plenty of storage.Cabinet is 11' long and 2'-6" wide and is built to hold the radial arm saw at the correct cutting height.Cabinet is mounted on a steel frame with casters for ease of moving around or can lock in stationary position.Ideal for the handyman woodworking shop or the professional shop.Will sale saw / cabinet s

$50.00   4 months ago
Glass cutting table, vintage - $50

For sale, Maple glass cutting table with guides. Solid and heavy 50" X 72".

Contact Us   4 months ago
CNC Plasma Cutting System with Water Table (Chowchilla CA)

All-Steel Tubular Frame Construction - 4 x 4 • 4 x 8 • 5 x 10 Cutting TablesTable is Built to Hold Water for Smoke and Particle ReductionDrain Tank, Water Pump, and PlumbingPC Base Controller w/ Mach 3 SoftwareSoftware that works with WindowsBrand New Lap Top ComputerSoft Touch Plate SensingAutomatic Torch Height ControllerY-Axis DriveZ-Axis DriveDual X-Axis DrivesV-Rails with Guide WheelsRack

Contact Us   4 months ago
CNC Plasma Cutting System with Water Table (Byron, CA)

All-Steel Tubular Frame Construction - 4 x 4 • 4 x 8 • 5 x 10 Cutting TablesTable is Built to Hold Water for Smoke and Particle ReductionDrain Tank, Water Pump, and Plumbing PC Base Controller w/ Mach 3 SoftwareSoftware that works with WindowsBrand New Lap Top ComputerSoft Touch Plate SensingAutomatic Torch Height ControllerY-Axis DriveZ-Axis DriveDual X-Axis DrivesV-Rails with Guide WheelsRac

$800.00   5 months ago
oxy-acetylene cutting machine and table - $800

Oxy-acetylene cutting machine and table. Can be adapted to plasma. Also table can be used to cut plywood. $ 800 call or

$200.00   5 months ago
Custom built glass cutting table/work bench - $200 (Santa Paula)

This table has brand new indoor carpet on top ,can be used for glass cutting or work bench table.also rolls on wheels.size / dimensions: 9' 10 1/2''x 67 1/2'' 33 1/2 ''


1 2 3


Last Updated on: October 17, 2017
0.0318541526794
2.14576721191E-6