Free Local Classifieds
Search   in
My Location  
> >

Converter phase in Tools For Sale

Filter Search
$1,000.00   2 days ago
PHASE CONVERTER - $1000 (Ellenburg Depot)

RONK ADD A PHASE MODEL 80A SN48436INPUT 240 VOLTS SINGLE PHASE, OUTPUT 240 VOLTS 3 PHASEHORSE POWER TOTAL 20 WITH TWO 10 HP OUTPUTS WITH 10 HP 3 PHASE STARTERS

$1,200.00   5 days ago
20hp rotary phase converter - $1200

20hp converter not been used much hooked up everything u need to make 3 phase power motor plus control box $$$1200 obo

$40.00   6 days ago
Static phase converter - $40 (Darlington)

So I bought this, ran my milling machine for 1 day and had a guy give me a big rotary converter the next day. It works just fine for motors from 1/2 to 3 hp. cost $65 like to get 40 out of it.

$550.00   6 days ago
Rotary Phase Converter in Los Angeles - $550 (Downtown Los Angeles)

The first picture is a new 10hp panel with used 200 volt idler for $550, this converter is your best choice if your source voltage is between 220 volts or lower.The second picture is new 7.5hp panel with a slightly used idler also for $550. The third picture is a New 10hp rotary converter for $650 and the last picture is a 15hp for $900.All the converters are completely wired and you will be able

$500.00   1 week ago
7 1/2 Hp ROTARY PHASE CONVERTER - $500 (Rossburg)

7 1/2hp heavy duty Rotary Phase Converter New motor and comports ready to run your 230v 3phase machines easy to wire push button start

$700.00   1 week ago
10hp Rotary Phase Converter - $700 (Rossburg)

10hp Rotary Phase Converter to run your 230V 3 Phase equipment all new components

$400.00   1 week ago
5hp rotary phase converter - $400 (Rossburg)

5 hp rotary phase converter to run 230v 3ph machinesxvcc

$500.00   2 weeks ago
1940's restored industrial greenlee table saw w/phase converter - $500 (Pocatello)

restored to perfection with epoxy primer/gray polyurethane 1940 greenlee industrial tablesaw, 18" max blade capacity, 5hp direct drive 3 phase with phase converter to run on household 240VAC. beautiful machine, very heavy, cuts 16/4 hard maple with ease and no saw marks!! $500 it's yours, over $2000 invested!! with custom biesemeyer fence and 1 1/2 inch thick solid phenolic router table built in a

$400.00   2 weeks ago
20 Phase Converter - $400 (dayton)

I have a 20 horsepower phase converter that takes 220 single and converts it to 3 phase power to run your mills, lathes, welders or what ever. I used it to run my bridgeport mill and lathe. Guy I got it from used it for a big welder.

$2,000.00   3 weeks ago
25HP Three-Phase Converter, Table Saw,Cable - $2000 (Mansfield, Tn.)

25 HP Three-Phase Converter $2000.00 (New $3785.00), Craftsman 10" Table Saw $200.00, 100' of 1/2" Cable $100.00 Contact Lester Snyder Phone calls only, no texts, no emails, and no third parties

$1,200.00   4 weeks ago
Roto-Phase phase converter - $1200 (bluffton)

I have a almost new phase converter to sell. Single phase in and 3 phase out. $1200.00. See photo of name plate for details.

$500.00   4 weeks ago
ROTARY PHASE CONVERTER,TEMCO 7.5 KV - $500 (Morro Bay)

TEMCO ROTARY PHASE CONVERTER 7.5 KV NOT MANY HOURS ON THIS PHASE CONVERTER. BY USING A ROTARY PHASE CONVERTER IT GIVES YOU 100% OF THE POWER TO RUN YOUR MACHINE VERSES A STATIC PHASE CONVERTER WHICH WILL ONLY GIVE YOU 75 % OF THE MACHINES POWER, I AM SELLING A ROTARY. THIS PHASE CONVERTER TAKES 220 AND SPLITS IT INTO 3 EVEN LEGS TO RUN 3 PHASE MACHINES

$2,000.00   1 month ago
25HP Three-Phase Converter, Table Saw, Cable - $2000 (Mansfield, Tn.)

25 HP Three-Phase Converter $2000.00, Craftsman 10" Table Saw $200.00, 100' of 1/2" Cable $100.00 Contact Lester Snyder Phone calls only, no texts, no emails, and no third parties

$2,400.00   1 month ago
Large Phase Converter - $2400 (Belgrade)

I used this phase converter to run my 27 hp, 43" wide belt sander and my 7 1/2 hp dust collector at the same time. It will run motors that add up to 65 hp all at the same time. Big enough to handle an entire shop. Roto Phase- rotary phase convertermaximum total HP= 65hpmaximum single HP= 25hpsingle phase input volts= 230three phase output volts=230Maximum total hp means the total hp of several mac

$575.00   1 month ago
Rotary Phase Converter, 3HP, Phase-A-Matic - $575 (Stevensville)

Near new condition, has maybe a few hours on it. Includes a safety kill switch pre-wired and ready to go!Phase A Matic, Mfr #: R-3Input Phase AC: 1 Output Phase AC: 3Knockout Size (In.): 1 Item: Phase ConverterType: Rotary Motor Load Rating: 100%Output HP: 3 Output Amps: 9.1Input Voltage: 208-240 Input (Amps): 20Width (In.): 12 Height (In.): 13Depth (In.): 19 Standards: -Consists Of: - Output Volt

$800.00   1 month ago
20 HP ROTORY PHASE CONVERTER - $800 (Manteo)

Make three phase 240volt. From 220 single phase.

$165.00   1 month ago
3 Phase converter - $165 (Paulden)

Phasemaster converter. This converts single phase 220 volt to 3 phase 220 volt to run heavy duty equipment. It will run up to 3 HP machinesCALLS ONLY---NO TEXT

$2,000.00   1 month ago
25HP Three-Phase Converter, Table Saw, Cable - $2000 (Mansfield, Tn.)

25 HP Three-Phase Converter $2000.00, Craftsman 10" Table Saw $200.00, 100' of 1/2" Cable $100.00 Contact Lester Snyder Phone calls only, no texts, no emails, and no third parties

$1,700.00   1 month ago
Rotary Phase Converter 30HP NEW - $1700 (Hamden)

Temco XR21 Rotary Phase converter 30 HP unit. This unit has been in our stock room for 5 years as a spare unit. Never used. Shipping available if needed, 500 lb machine

$150.00   1 month ago
2hp unisaw motor w/starter & phase converter - $150 (Middleboro)

Delta Rockwell era Unisaw motor. 2hp 3ph with static phase converter, magnetic starter and plug end. All wired together, can demonstrate.


1 2 3 4 5 6 7 8 9 10


Last Updated on: July 23, 2017
0.0248999595642
1.90734863281E-6