Free Local Classifieds
Search   in
My Location  
> >

Blade extensions in Tools For Sale

Filter Search
$3,500.00   6 days ago
USED Cascade 35E-QPB-205 Class II Fork Mount Push/Pull (Slip Sheet) - $3500 (Bridgeton)

Used Push/Pull Attachment for forklifts. Mounts easily onto most forklifts if there is a 3rd/4th available function. This unit just slides onto the forks and is locked in place with tines. Then the two hydraulic hoses are attached and it's ready to work. Function has been verified before removal (see video).Capacity @ 24": 3500 lbs.Plate Size: 15"x48"Class: 2 (QFM Quick Fork Mount)Outside Platen S

$3,500.00   1 week ago
USED Cascade 35E-QPB-205 Class II Fork Mount Push/Pull (Slip Sheet) - $3500 (Bridgeton)

Used Push/Pull Attachment for forklifts. Mounts easily onto most forklifts if there is a 3rd/4th available function. This unit just slides onto the forks and is locked in place with tines. Then the two hydraulic hoses are attached and it's ready to work. Function has been verified before removal (see video).Capacity @ 24": 3500 lbs.Plate Size: 15"x48"Class: 2 (QFM Quick Fork Mount)Outside Platen S

$300.00   1 week ago
CRAFTSMAN/SEARS 10" TABLE SAW - $300 (Parkers Crossroads, TN)

YOU CAN'T BUY THEM LIKE THIS ANYMORE! 10" BELT DRIVE, SET UP FOR 4" DUST PORT, EXCELLENT CONDITION. FULLY ADJUSTABLE, NEVER BEEN STORED OUTSIDE, NO RUST THAT BINDS MOVING PARTS, BLADE ALIGNMENT TRUE TO FENCE. SOLID CAST IRON TABLE AND TABLE EXTENSIONS. MITER GAUGE, TABLE INSERTS FOR STANDARD BLADE AND DADO/PLANER BLADES, BLADE WRENCH, AND ORIGINAL MANUAL.NO SCAMS, NO EMAILS, IF YOU WANT TO BY IT P

$100.00   2 weeks ago
Power King 7" Benchtop Table Saw - $100 (Waterville)

Offering this Power King 7" Bench Top Table Saw. Model 271, SN 14658. In Very Good condition. The table top was rusty and I have cleaned it. See the photos. The previous owner made table wing extensions for both sides - they are not original. I have disassembled the saw completely and examined and cleaned it and painted it. I installed new arbor shaft bearings. There are no broken parts. Everythin

$399.00   3 weeks ago
table saw, DEWALT UNISAW 10", 2 hp, - $399 (Eureka Ca)

Large contractors model table saw, all steel, cast iron top and large cast iron extensions with steel stand This saw usually sells used for $700 to $1700. weight is about 450 pounds. this is model 140/1, ser. no.386044 so this should be a1962 unit.The cast iron extension when actually attached makes the right side extension from the blade 57". the left hand side is 27 1/2" from the blade.the motor

$80.00   3 weeks ago
Craftsman Table Saw - $80 (Grand Haven)

Craftsman Table Saw $80 or best offerITEM DETAILSCraftsman table saw, model number 113.241920 with a 9-inch blade, table extensions and accessories included.CONDITIONGoodWorks well, has dust and some finish blemishes consistent with age and use. Rip fence clamp hardware is missing but includes the clamp I used instead.

$3,500.00   1 month ago
USED Cascade 35E-QPB-205 Class II Fork Mount Push/Pull (Slip Sheet) - $3500 (Bridgeton)

Used Push/Pull Attachment for forklifts. Mounts easily onto most forklifts if there is a 3rd/4th available function. This unit just slides onto the forks and is locked in place with tines. Then the two hydraulic hoses are attached and it's ready to work. Function has been verified before removal (see video).Capacity @ 24": 3500 lbs.Plate Size: 15"x48"Class: 2 (QFM Quick Fork Mount)Outside Platen S

$3,500.00   1 month ago
USED Cascade 35E-QB-174 Class II Fork Mount Push/Pull (Slip Sheet) - $3500 (Bridgeton)

sed Push/Pull Attachment for forklifts. Mounts easily onto most forklifts if there is a 3rd/4th available function. This unit just slides onto the forks and is locked in place with tines. Then the two hydraulic hoses are attached and it's ready to work. Function has been verified before removal (see video).Capacity @ 24": 3500 lbs.Plate Size: 15"x48"Class: 2 (QFM Quick Fork Mount)Outside Platen Sp

$3,500.00   1 month ago
USED Cascade 35E-QPB-205 Class II Fork Mount Push/Pull (Slip Sheet) - $3500 (Bridgeton)

Used Push/Pull Attachment for forklifts. Mounts easily onto most forklifts if there is a 3rd/4th available function. This unit just slides onto the forks and is locked in place with tines. Then the two hydraulic hoses are attached and it's ready to work. Function has been verified before removal (see video).Capacity @ 24": 3500 lbs.Plate Size: 15"x48"Class: 2 (QFM Quick Fork Mount)Outside Platen S

$225.00   1 month ago
Craftsman 10" Tablesaw - $225 (Marathon, NY)

Model # 315.228390120 volt, 13 amps, 60hz, 3600 rpm3hp motorblade arbor 5/8"blade tilt 0-45 degreetable size without extension 20" x 27"table with extensions 44" x 27"also has a align a rip fenceworks great

$120.00   1 month ago
Norge 10" Sliding Miter Saw with Laser - $120 (Johnson City)

IN STOCK TODAY!! $119.99!!10" Sliding Miter Saw with Laser LineQuick Highlights:- Sliding Miter Saw has much greater cutting capacities than the normal miter saw. - Comes with 2 work extension support bars, 1 dust bag, 1 clamp with laser - Horizontal D-handle design for easy and comfortable operation - Movable enlarged aluminum base for a wide variety of applications - Table extensions provide sup

$240.00   1 month ago
12" Hitachi miter saw chop saw and new in box stand - $240

Gently used C12FDH 12" miter saw with new in box stand. Saw specs are as follows: 12-inch dual bevel compound miter saw with laser markerMiter range 52 degrees right and left; bevel range 48 degrees right and left; 15 Amp; 4,000 rpmMicro bevel adjustment knob for fine tuning bevel angles; larger pivoting fence raises to 5-1/8 inches for cutting crown moldingIncludes saw blade, dust bag, vise assem

$3,500.00   1 month ago
USED Cascade 35E-QB-174 Class II Fork Mount Push/Pull (Slip Sheet) - $3500 (Bridgeton)

Used Push/Pull Attachment for forklifts. Mounts easily onto most forklifts if there is a 3rd/4th available function. This unit just slides onto the forks and is locked in place with tines. Then the two hydraulic hoses are attached and it's ready to work. Function has been verified before removal (see video).Capacity @ 24": 3500 lbs.Plate Size: 15"x48"Class: 2 (QFM Quick Fork Mount)Outside Platen S

$3,500.00   1 month ago
USED Cascade 35E-QB-174 Class II Fork Mount Push/Pull (Slip Sheet) - $3500 (Bridgeton)

sed Push/Pull Attachment for forklifts. Mounts easily onto most forklifts if there is a 3rd/4th available function. This unit just slides onto the forks and is locked in place with tines. Then the two hydraulic hoses are attached and it's ready to work. Function has been verified before removal (see video).Capacity @ 24": 3500 lbs.Plate Size: 15"x48"Class: 2 (QFM Quick Fork Mount)Outside Platen Sp

$3,500.00   1 month ago
USED Cascade 35E-QPB-205 Class II Fork Mount Push/Pull (Slip Sheet) - $3500 (Bridgeton)

Used Push/Pull Attachment for forklifts. Mounts easily onto most forklifts if there is a 3rd/4th available function. This unit just slides onto the forks and is locked in place with tines. Then the two hydraulic hoses are attached and it's ready to work. Function has been verified before removal (see video).Capacity @ 24": 3500 lbs.Plate Size: 15"x48"Class: 2 (QFM Quick Fork Mount)Outside Platen S

$235.00   1 month ago
Makita 10" compound Mitre Saw model # LS1013F - $235 (Moscow)

Makita 10" compound Mitre Saw model # LS1013Fprivately owned since new , good condition, with blade and lightnot used for production - sold 'As-Is'Text is preferred contact method, no calls please (email if you don't text)$235 OBO cashlocated near downtown Moscowoptional extra available :two wheel miter saw table with adjustable extensions to take long length of wood, one fitted with a roller, for

$200.00   2 months ago
Sears 10 inch Contractors saw - $200 (Show Low, Az)

Sears 10 inch Contractors saw and stand. Includes left and right table extensions, combination blade, and protective cover.

$120.00   2 months ago
Norge 10" Sliding Miter Saw with Laser - $120 (Johnson City)

IN STOCK TODAY!! $119.99!!10" Sliding Miter w/ Laser Power SawQuick Highlights:- Sliding Miter Saw has much greater cutting capacities than the normal miter saw. - Comes with 2 work extension support bars, 1 dust bag, 1 clamp with laser - Horizontal D-handle design for easy and comfortable operation - Movable enlarged aluminum base for a wide variety of applications - Table extensions provide supp

$3,500.00   2 months ago
USED Cascade 35E-QPB-205 Class II Fork Mount Push/Pull (Slip Sheet) - $3500 (Bridgeton)

Used Push/Pull Attachment for forklifts. Mounts easily onto most forklifts if there is a 3rd/4th available function. This unit just slides onto the forks and is locked in place with tines. Then the two hydraulic hoses are attached and it's ready to work. Function has been verified before removal (see video).Capacity @ 24": 3500 lbs.Plate Size: 15"x48"Class: 2 (QFM Quick Fork Mount)Outside Platen S

$3,500.00   2 months ago
USED Cascade 35E-QB-174 Class II Fork Mount Push/Pull (Slip Sheet) - $3500 (Bridgeton)

sed Push/Pull Attachment for forklifts. Mounts easily onto most forklifts if there is a 3rd/4th available function. This unit just slides onto the forks and is locked in place with tines. Then the two hydraulic hoses are attached and it's ready to work. Function has been verified before removal (see video).Capacity @ 24": 3500 lbs.Plate Size: 15"x48"Class: 2 (QFM Quick Fork Mount)Outside Platen Sp


1 2 3 4 5 6


Last Updated on: March 26, 2017
0.0209410190582
9.53674316406E-7