Free Local Classifieds
Search   in
My Location  
> >

Atlas lathe for sale in Tools For Sale

Filter Search
$800.00   2 days ago
atlas drum and rotor lathe - $800 (winston salem)

i have for sale both the atlas rotor lathe and drum lathe. both have been restored and comes with all the adapters including 1 ton adapters. and chip pan for the drum lathe. the metal bench they come with, and 2 rotor bands. this is a very good lathe setup for any shop. i have tested them out and both work great. new gear oil in both and all the gear have little to no ware on them.these are perfec

$1.00   4 weeks ago
Shop Tools - $1 (Allegan)

I am closing down and consolidating machines from two locations. I am selling the surplus and keeping the newest. All these are older machines made of cast iron - but they are homeowner size - not industrial. All are in good working condition but all need some polishing and oiling.In a couple of weeks I will put these in a garage sale but I would like to unload a few of these to save having to mov

$250.00   1 month ago
Metal lathe accessories - $250 (Lisbon)

Collet set with handwheel closer for heavy ten Southbend. Have collet rack and about 20 collets. Also have several change gears for Atlas lathe for $5 each. In person cash sale. Phone calls only.

$900.00   1 month ago
8" Jointer/American Saw & Mill Company - $900 (Reinholds)

2 HP, 3 Phase, 230 Volt, direct drive, ball bearing. This is an all original vintage Jointer. Was designed for pattern maker shops. It is a tank, weighing in at 500+lbs. Super smooth and accurate.I have been a professional cabinetmaker & woodworker for over 30 years and as a hobby I am selling clean, quality, light industrial, woodworking & metalworking tools primarily made in the USA. The

$100.00   1 month ago
Metal / Woodworking Vices - $100 (REINHOLDS)

4" Jaw, Prentiss Vice Co., USA, Bulldog #53 approximately 50 lbs. $100Wilson Combo Swivel Metal / Woodworking Vise $125I have been a professional cabinetmaker & woodworker for over 30 years and as a hobby I am selling clean, quality, light industrial, woodworking & metalworking tools primarily made in the USA. These tools have been removed from working business operations, surplus/ downsiz

$1,100.00   2 months ago
Hardinge Metal Lathe DV 59 second operation - $1100 (Menomonie, WI)

Hardinge Metal Lathemodel DV 59second operation designcollet draw bar 5Cplain style tailstockcross slideHardinge three jaw chuck3/4 HP three phase electric motor 220Vstep pulley speed adjustmentproper motor starter and reversible switch boxbuyer wires from starter to power source and puts it to workno damage or repairslathe is in working order and is a working pullwas under power last week$1100if

$1,000.00   2 months ago
Atlas Metal Lathe - $1000 (Olean, NY)

Atlas 36" Bed metal Lathe for sale. Comes with varies cutting tools. 2 Tail Stop Chucks, Live and Dead Center...x2 3 Jaw chucks with Keys. Quick Change Tool not part of sale but have Lantern tool post with holder that I can throw in. Asking $1,000 and you pick up.

$349.00   2 months ago
Aloris CXA Precision Quick Change Tool Post 13-18" swing - $349 (Greater Indianapolis North, Indiana)

Aloris CXA Quick Change Tool Post, 13"-18" swing, INCLUDES TOOLINGSerious cash and carry buyer call 765-963- 684fiveUsed Aloris CXA Series Precision Quick Change Tool Post Wedge style. ($533+ new on ebay)For Lathe with 13" to 18" Swing. Works good and clamps the holders tight.Accepts CX and CXA Dorian/Aloris toolingTooling INCLUDED:used Dorian D35CXA-1 Turning & Facing Holder ($78+ new on ebay

$549.00   3 months ago
Kearney & Trecker 12" model K dividing head-two plates - $549 (Geater Indy North-Tipton)

1970 Kearney & Trecker 12" model K dividing head with two plates, #22690 (60, 66, 72, 84, 92 96 & 100 holes), the other is 53-86-67-56. The model K is called a Universal Spiral Dividing Head. This model dividing head is capable of being gear driven via a conventional or low reduction gear attachment from the lead screw of standard (.250"/rev.)table. Actually with some gear changes in the g

$1,100.00   3 months ago
Hardinge Metal Lathe DV 59 second operation - $1100 (Menomonie, WI)

Hardinge Metal Lathemodel DV 59second operation designcollet draw bar 5Cplain style tailstockcross slideHardinge three jaw chuck3/4 HP three phase electric motor 220Vstep pulley speed adjustmentproper motor starter and reversible switch boxbuyer wires from starter to power source and puts it to workno damage or repairslathe is in working order and is a working pullwas under power last week$1100 ob

$800.00   4 months ago
Craftsman/Atlas Metal Lathe - $800 (Richmond)

I have a Craftsman metal lathe for sale. It is made by Atlas. It is 12 inch swing with 24 inches between centers. Runs off 110 volts. Has quick change gear box for threading and feeds. Has both 3 jaw and 4 jaw chucks. Has some other misc tooling that goes with it. I want $800 for it. Calls only. NO TEXTING. Will remove ad when sold.Thanks

$1.00   4 months ago
Atlas 618 lathe parts - $1 (Marstons Mills)

618 lathe parts for sale. Have bed, headstock, motor and other parts as well. Enough to put together a complete machine. Contact to inquire on what you want.

$289.00   5 months ago
Atlas metal lathe - $289 (La Mesa)

For sale a small atlas metal cutting lathe manufactured for Sears and roebuck under the craftsman name. A perfect leave for your benchtop, what you see is what you get, I have no change gears no steady rest no extra accessories or tooling, these are all accessible online at eBay. I do have a motor for an extra $20

$1,800.00   5 months ago
New CNC *Complete* - $1800 (Ephrata)

I am listing for sale my recently finished Desktop CNC router. Time for the next project! Includes everything needed minus router. Designed to use either Bosch Colt or Dewalt 611. ( 611 pictured but that stays with my other cnc :) )Brand new never used. This was a challenge to myself to see if I could design from scratch and build my own cnc router. I have completed the build and I am now ready to

$800.00   6 months ago
Craftsman/Atlas Metal Lathe - $800 (Richmond)

I have a Craftsman metal lathe for sale. It is made by Atlas. It is 12 inch swing with 24 inches between centers. Runs off 110 volts. Has quick change gear box for threading and feeds. Has both 3 jaw and 4 jaw chucks. Has some other misc tooling that goes with it. I want $800 for it. Calls only. NO TEXTING. Will remove ad when sold.Thanks

$549.00   6 months ago
Kearney & Trecker 12" model K dividing head-two plates - $549 (Geater Indy North-Tipton)

1970 Kearney & Trecker 12" model K dividing head with two plates, #22690 (60, 66, 72, 84, 92 96 & 100 holes), the other is 53-86-67-56. The model K is called a Universal Spiral Dividing Head. This model dividing head is capable of being gear driven via a conventional or low reduction gear attachment from the lead screw of standard (.250"/rev.)table. Actually with some gear changes in the gear atta

$349.00   6 months ago
Aloris CXA Precision Quick Change Tool Post 13-18" swing - $349 (Tipton Indiana)

Aloris CXA Quick Change Tool Post, 13"-18" swing, INCLUDES TOOLINGUsed Aloris CXA Series Precision Quick Change Tool Post Wedge style. ($533+ new on ebay)For Lathe with 13" to 18" Swing. Works good and clamps the holders tight.Accepts CX and CXA Dorian/Aloris toolingTooling INCLUDED:used Dorian D35CXA-1 Turning & Facing Holder ($78+ new on ebay).Takes various sizes of bits. Turning and facing tool

Contact Us   7 months ago
Atlas 10" metal turning lathe model 10F TH54 with extras

Up for sale is used, fully rebuilt Atlas TH54 metal lathe with some extras. PLEASE READ ENTIRE DESCRIPTION. Needs some work and some replacement parts for the feed & screw cutting to work. This lathe has a 10" swing and 54" bed length. Actual maximum distance between centers is something like 36".Note that some of the photos were taken during reassembly before the lathe was fully back together. Pl

$1.00   7 months ago
Independent Auto Mechanic's Retirement (Iver's) Sale - $1 (Mankato)

Going Out of Business/Retirement SaleSat., July 23, 20168am-1pm NO EARLY SALESIver's Repair127 Washington Street, Mankato, MN 56001Equipment from Snap-On:MicrovatInjector TesterVacuum Gauge SetInjector Gauge SetAC Clutch and Hub ToolVantageCooling System TesterCooling System FillerEvaporative Emissions Tester (Smoke Machine)AVR Charging System2013 Solus Ultra Scan ToolBG Equipment as follows:Cooli

$599.00   7 months ago
Atlas 10" metal turning lathe model 10F TH54 - $599 (Cordova)

Up for sale is used, fully rebuilt Atlas TH54 metal lathe with some extras. PLEASE READ ENTIRE DESCRIPTION. Needs some work and some replacement parts for the feed & screw cutting to work. This lathe has a 10" swing and 54" bed length. Actual maximum distance between centers is something like 36".Note that some of the photos were taken during reassembly before the lathe was fully back together. Pl


1 2


Last Updated on: February 21, 2017
0.0377171039581
2.14576721191E-6