Free Local Classifieds in Shoals, AL
Search   in
My Location  
> > >

2013 Rotary Furnace (Rapid City, SD)

2013 Rotary Furnace (Rapid City, SD)

  2013 Rotary Furnace Rapid City, SD

Ad id: 1311177847765230
Views: 2
Date listed 4 weeks ago
Contact Us

Rotary furnace built for the purpose of separating range lead and copper casings to recycle and recover metals. Unit can process about 4000lb raw material in main chamber per hour. This unit is batch type furnace that processes dry or wet lead or copper from ranges with no explosive hazards. This system works perfect for range lead recycling. It is also capable of melting and or separating aluminum from ferrous metals or mixing lead alloys for bullet manufacturing. Operates with natural gas or propane. This unit was built for efficient production and can be serviced and or repair with very little down time! All parts are available through Mansell & Associates or local distributors.
• 11cubic ft. internal chamber
• 7 inch refractory liner sidewalls
• 15 inch refractory liner rear base wall
• 1 million BTU Incinomite combustion main burner
• Heats with on natural gas or Propane
• Hydraulic door open and close
• Hydraulic tilt up and down
• Electronic control box
• 60 amp 1phase electrical system
• Baldor 5hp 23 amp electric motor coupled to 32,000 ftp torque gear reducer
• Chief Hydraulic pump system with controllers
• Frame work 4x4x1/4inch square tubing
• Emergency shutoff
Mansell & Associates Afterburner/Emissions control
• Incinomite 800,000 BTU combustion burner NG/Propane
• 4inch refractory liner
• 12inch stack outlet or can be modified to fit desired opening
• Designed to hold emissions for .08 seconds for proper destruction of harmful emissions
• Thermal coupler for recording or temperature verification
• Emergency Shutoff
To rebuild this same unit would cost in excess of $100,000
Value Deal at $50,000 or best offer

Similar Items
Last Updated on: December 13, 2017
Report Ad
Contact Poster by Email

Email Poster

Refresh Image