Free Local Classifieds in Seattle, WA
Search   in
My Location  
> > >

Emotiva XPA-100 Gen 2 monoblock amplifiers - 1 pair - $600 (Olympia)

Emotiva XPA-100 Gen 2 monoblock amplifiers - 1 pair - $600 (Olympia)



  Emotiva XPA-100 Gen 2 monoblock amplifiers - 1 pair - $600 Olympia
 

 
Ad id: 411172411704097
Views: 6
Price
$600.00

These high powered amps can drive any speaker with ease and are in great shape. I'm the second owner and bought them about a year ago with very little use on them. The Emotiva warranty should be transferable. They have a 5 year warranty. I'm not sure how much is left, should be close to 4 years. I'll be happy to provide the serial numbers if you'd like to contact Emotiva to check the warranty status. They have only been used for my surround speakers in a smoke, kid, and pet free home. Both work perfectly and have no issues. I have the original boxes and the protective bags they came in. Sold as a pair only.

Cash or Paypal (buyer pays fees) only. Will consider shipping.

Specifications

Topology:
Fully discrete, dual differential, high current, short signal path Class A/B.

Number of Channels:
1

Power Output (rated power; THD < 1%):
250 watts (1 channel) into 8 Ohms.
400 watts (1 channel) into 4 Ohms.

Rated Power Bandwidth (at rated power; 8 Ohm load):
10 Hz to 20 kHz + / - 0.07 dB.

Minimum Recommended Load Impedance:
4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads).

Frequency Response:
10 Hz to 80 kHz (+ 0 / - 1 dB).

THD + noise:
< 0.02%

Signal to Noise Ratio (8 Ohm load):
> 89 dB at 1 watt (A-weighted).
> 112 dB at rated power (A-weighted).

Damping Factor (8 Ohm load):
> 500

Speaker Output Connections:
Full-sized, 5-way binding posts; two pairs per channel (one channel).

Power Supply:
60,000 uF of storage capacitance.
360 VA heavy duty toroidal transformer

Input Sensitivity (for rated power; 8 Ohm load):
1200 mV.

Gain:
29 dB.

Input Connections:
Unbalanced (RCA); balanced (XLR); one each.

Input Impedance:
47 kOhms.

Trigger:
Trigger Input: 5 - 20 V (AC or DC); <10 mA input current required.
Trigger Output: 12 VDC; can drive any load up to 50 mA.

Power Requirements:
115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched).

Front Panel Controls and Indicators:
Standby; push button (halo ring changes color to indicate Standby or On).
Status LEDs (two); blue LED illuminates for normal operation, red LED flashes during
power-on or when a fault occurs; (may be disabled by rear panel Status LED switch).

Rear Panel Controls:
AC Power switch; rocker switch (switches AC mains power).
Status LEDs switch; small slide switch on left (disables front panel Status LEDs and dims.
Standby button halo lighting).
Input selector; toggle switch (selects between balanced and unbalanced inputs).

Protection:
The XPA-100 is protected against excessive operating temperature, shorted speaker
connections, ground faults, and other common fault conditions.

Dimensions:
17" wide x 3.875" high x 19" deep (includes feet and binding posts).

Weight:
27 pounds unboxed (33 pounds boxed).






 
 
 
Similar Items
Last Updated on: February 22, 2018
Report Ad
 
 
Contact Poster by Email

Email Poster

CAPTCHA Image
Refresh Image