Free Local Classifieds
Search   in
My Location  

 
Filter Search
$300.00   3 weeks ago
powermatic power feeder - $300 (baskin)

Feeder,110 single phase

$1,500.00   1 month ago
Ritter R10 5 HP Wood Shaper W/ 1 HP Power Feeder - $1500 (Eastside)

I would like to upgrade to a sliding table shaper and need to get rid of this one first. Runs well. Adjustment a little sticky. Power feeder missing knob on speed adjustment but has brand new tires. The shaper has a brand new magnetic starter and is 5HP. The power feeder is 1HP. Both units are 3 phase and currently wired 220V. Motor is a US Made Baldor. Parts can still be had for this machine if a

$1,800.00   1 month ago
INTERWOOD PROFILE SANDER DELTA POWER FEEDER - $1800 (BENNET,NE)

Interwood RC-3 profile sander with Delta 36-836 three wheel power feeder. 2 HP,3 PH,220/440V,1140 RPM. Item works great.

$175.00   1 month ago
Delta 1/4 HP Power Feeder (Model 36-850) - $175 (Yankton, SD)

Delta 1/4 HP Power Feeder with almost brand new drive wheels. This unit was just taken out of service because we needed a larger one with faster feed speeds. This unit would be great for the hobbyist or small shop. Unit was in use on a table saw, but will also work on shapers, or jointers. Cash only and would prefer you pick item up.

$50.00   1 month ago
Delta 1/4 HP Power Feeder (For Parts) - $50 (Yankton, SD)

Delta 1/4 HP Power Feeder for Table Saw, Shaper, Jointer, Etc. Motor works, just something in the drive doesn't. That is why we are selling as a parts unit.

$700.00   2 months ago
Delta Power Feeder (Single Phase) - $700 (Ashville)

I'm selling a 1HP Delta Power Feeder 230v 1 phase. It works great and is in good shape. Not sure of the year, came with a shaper that I purchased a few years ago. I have recently upgraded my shaper and it came with a Power Feeder. From the research I have done this Power Feeder cost around $1,200 new.

$120.00   2 months ago
Woodworking Power Feeder - $120 (Clio)

Heavy duty 3 roller power feeder. 3 phase.

$6,850.00   2 months ago
Power Rack Square Bale Feeder - $6850 (El Dorado)

Power Rack Square Bale Feeder. One man can easily feed 2 1-ton bales from his pickup or tractor cab. Even wives can handle this job. One customer's wife said to her husband "It feels like we're cheating." More details at moveitinc.com

$2,200.00   2 months ago
3 HP 220 volt wood shape with 1 HP power feeder. - $2200 (Hanover)

3 HP 220 volt wood shape with 1 HP power feeder.

$1,250.00   2 months ago
POWCON 200 AMP MIG WELDER W/ POWER WIRE FEEDER - $1250 (DOWNINGTOWN, PA)

POWCON 200 AMP MIG WELDER WITH POWER WIRE FEEDER 300 AMP STICK PORTBARELY USED USED IN LANDSCAPE SHOPGREAT CONDITION $1,250.00 CASH ONLYNO CHECKS OR TRADESCALL RICHARD

$800.00   2 months ago
Weaver power feeder - $800 (Coralville)

I have a lightly used Weaver power feeder, variable speed from 0-50fpm, track feeder with 4 belts. Belts are in good shape. This one has the attachment brackets for a Weaver shaper, but it will fit on a Grizzly 3hp shaper also with adapter plates I made. http://www.weaver-sales.com/power-feeders.htm

$4,200.00   3 months ago
SCMI Minimax Shaper T40N + Power Feeder + $1500 in knives - $4200 (Durango)

2008 SCMI Minimax Shaper T40N + Powermatic Power Feeder + $1500 in shaper knivesShaper is single phase 220vPower feeder is 110vMovable base includedPurchased March 2008, excellent condition, minimally used Located in Durango, CO. Will add more photos and details of everything soon.PHONE CALLS ONLY, NO TEXTS OR EMAILS DUE TO SPAM. MICHAEL ALPENGLOWDESIGNDURANGO.COM

$800.00   3 months ago
Miller CP-250TS DC Arc Welder Power Supply, 10-E Wire feeder - $800 (Stevensville)

Used working Welder and Wire Feeder. Located in Stevensville Michigan.

$4,500.00   3 months ago
7.5 Hp titling Arbor Shaper with power feeder - $4500 (San Leon)

Grizzly 7.5 hp Tilting Arbor Shaper with belt drive Power feeder.. 1ΒΌ" , 3/4" spindles ... Used less than 75 hours...

$750.00   4 months ago
SCMI R9A Vertical Pin Router / Shaper - Power Feeder Function - $750 (San Antonio TX)

SCMI Vertical Router / Pin Router/ or Overhead Router Email if interested. Only serious inquiries please. Cash only - no trades.Thanks for looking.

$920.00   4 months ago
Weaver power feeder - $920 (Coralville)

I have a lightly used Weaver power feeder, variable speed from 0-50fpm, track feeder with 4 belts. Belts are in good shape. This one has the attachment brackets for a Weaver shaper, but it will fit on a Grizzly 3hp shaper also with adapter plates I made. http://www.weaver-sales.com/power-feeders.htm

$850.00   4 months ago
Miller CP-250TS DC Arc Welder Power Supply, 10-E Wire feeder - $850 (Stevensville)

Used working Welder and Wire Feeder. Located in Stevensville Michigan.

$850.00   5 months ago
Miller CP-250TS DC Arc Welder Power Supply, 10-E Wire feeder - $850 (Stevensville)

Used working Welder and Wire Feeder. Located in Stevensville Michigan.

$175.00   6 months ago
Mini Power Feeder - $175 (Jefferson, OH)

Variable speed / reversible

$1,750.00   6 months ago
Miller CP-302 CV DC Welding Power Source & 22A 24V Wire Feeder, Welder - $1750 (Stevensville)

Miller CP-302 CV DC Welding Power Source & 22A 24V Wire Feeder, MIG Welder Kit w/ cables and stinger. We have a couple units available. Good working unit. Call or email. The phone number does not receive text messages.


1 2 3 4


Last Updated on: February 18, 2018
0.0668909549713
1.90734863281E-6