Free Local Classifieds in Jacksonville, NC
Search   in
My Location  
> > >

Custom built motorcycle - $5200 (Jacksonville)

Custom built motorcycle - $5200 (Jacksonville)

  Custom built motorcycle - $5200 Jacksonville

Ad id: 1301188353872906
Views: 5
Date listed 1 month ago

Started off as a 1982 honda goldwing then I started cutting the frame up. It has a clean and clear nc title as a 2015 custom built mc.

Big changes:
Rear section completely cut off with custom rear suspension. Rear shocks are norrow Harley softtail style pull shocks that mount to the lower engine mounts and are ride height adjustable (feels like a Cadillac on the road smooth). Shock mounts on swingarm are 1/2 thick steel triangles tig welded under the swingarm.
Floating seat without sugarcoating it is part of a leaf spring from a golf cart with a 1/2" seat pan which is surprisingly comfy. This piece is fully removable to access the first of 2 fuel tanks (the 2nd tank is what looks like an oil tank under the seat. They are connected together giving approximately 2.5 gallons of fuel).
All the electrics (battery, ignition, gauges, fuse panels, etc) are under the false tank
The gauges are prosport evo red/blue for oil, coolant, and volunteer. The speedo/odomete/fuel gauge is a koso dl gauge.
Used to be pke ignition (proximity with a key fob and start button) but had some issues with Chinese quality control so right now there is a Harley key switch under the fuel door which utilizes the start button and is lockable. Still have the pke system to go with it but not worth my time to put it back in since it requires a reset randomly to work again.
Originally headlight was a vintage Suzuki very nice still have it but the glass is cracked and those bad boys are hard to find the correct fitting glass assembly. I have 2 other headlights that I will throw in (both pictured).
Tires are still brand new
Carburators: currently have the original carbs on they work great, but the primer pump on carb 3 is leaking gas. Not sure if that's from sitting too long or the diaphram has a hole in it. (These were rebuilt in 2014). If the stock carbs aren't to your liking I have a set of randakk Weber carb intakes with a properly jetted set of Weber (redline made in Italy) 40idf's with velocity stacks. I was building linkage for these and stopped because I had a thought to use cables instead of a mechanical lever system. (I WILL SELL THESE SEPARATELY BECAUSE THEY ARE EXSPENSIVE ADDITIONS. The intakes alone cost $350.00 with I instructions for everything needed to tune and build custom hardware. The carbs cost around $450.00 for the set and are commonly used on dune buggies and vintage sports cars so they're not included).

Original coils were shot so it now has a coil pack from a dodge neon with MSD streetfire wires.
No idea the brand but have a headlight wind deflector shown I. Pictures that mounts into the Suzuki light perfectly. Haven't tried it on the other headlights.

There is still some stuff to do on it. Paint was never finished, front fender remounted, the beformentioned carb leak (it will start and run but I wouldn't ride it with the fuel leaking it's already taken a toll on the engine paint)

I also have a 2 boxes full of spare parts and old original parts to include 2 front wheels original gauge assembly and much more.

Any questions just ask

Also if you email or text without starting with (twin life) I'll just assume you're a scammer and or bot. Or you could call also

6eight2 22nine 8fivefour5

Similar Items
Last Updated on: February 26, 2018
Report Ad
Contact Poster by Email

Email Poster

Refresh Image