Free Local Classifieds
Search   in
My Location  
> > >

Tools For Sale in Little Rock, AR

Filter Search
$0.29   1 day ago
Cork Underlayment - High Density - Portugal Made -Buy Direct and Save

We have our cork underlayment available in three different thicknesses – 3mm or 6mm or 12mm. Cork is the thick, light weight, elastic outer bark of the cork oak tree. The bark naturally splits every 9 to 15 years and can be safely harvested without causing harm to the tree. Cork is naturally hypoallergenic and is resistant to mold and mildew. In cold areas, most of our clients like to work with

$160.00   1 week ago
$1600 - Like new 2016 Miller Bobcat Welder 250 EFI Welder Generator 100leads-2 Hours - $1600

The price is firm - $1600 My father welder has only few hours and it\\\'s like new! 100\\\" leads, cover and wrranty available. 250 engine it\\\'s a big gas saver.SO THIS IS A 250 MILLER WELDER WITH 2 HOURS ON IT! Please contact me at: SRH8822@GMAIL.COM !welder generator welding 6500 generac leads lincoln ranger mig plasma cutter inverter 225 300 honda eu 3000 2000

$20.00   1 week ago
Box of Wurth torx screws... - $20 (Conway)

Box of 1200 Wurth assorted torx screws...$20...

$50.00   1 week ago
Heavy strap cutters... - $50 (Conway)

Acme(Interlake)E36B16 heavy strap cutters...$50...

$80.00   1 week ago
Fowler depth micrometer 6 inch like new - $80 (beebe ar)

I have a like new fowler brand depth micrometer these are expensive newit is the 6 inch been used to demonstrate 3 times $80.00 call if serious about wanting it. goes on ebay soon

$40.00   1 week ago
Craftsman Corded Reciprocating Saw - $40 (HSVillage)

I have an almost new Craftsman 6.5 amp corded Reciprocating Saw for sale. Used only once. Comes with 2 blades. Call No texts or email.

$150.00   1 week ago
Hitachi 18Volt Hammer drill - $150 (Sheridan)

Hitachi 18 volt 4 speed Hammer drill. This is a 4 speed drill and hammer drill. It has two 3AH batteries and a cooling charger. The DV18DL's two-piece rare-earth magnet motor produces 570 inch/pounds of torque to power through brick up to 5/8-inch thick, as well as the toughest wood, metal, and aluminum. And with its 22-stage ratcheting clutch and two-step switch, you can select between four speed

$30.00   1 week ago
Ingersol Rand 3/8" air ratchet - $30 (Sheridan)

Ingersol Rand 1/2" air ratchet. Like new. 170 rpm.

Contact Us   1 week ago
SCAFFOLD SAFETY SIDES (Conway)

ASSORTED SAFETY SIDES ,SAFETY RAILS, OUTRIGGERS ,AND 1 HALF SECTION 3*7 FTADJ, LEGS AND CASTERS,AND TOE BOARDS ALL BIL-JAX BRAND SIZE IS A #5CASTERS $10.75 EACHSAFETY SIDES REG SCAF,$77.00 EACHOUTRIGGERS $54.00 SET OF 4BAKERS RACK SAFETY SIDES $65.00 EACHTOE BOARDS $42.00 EACH OUT REACH BOOM $25.001/2 SECTION 3*7FT $ 77.00

$249.00   1 week ago
Amsec FS1812 Safes - $249

Amsec FS1812 Safes$249Hot Springs National Park, AR (71913)American Security Products Star Safe.30"H x 20"W x 20"DAll steel burglary and Fire safe w/ Combination Lock.

$2,800.00   1 week ago
Ammco 4000 Brake Lathe - $2800 (Greers Ferry)

This Brake Lathe was rebuilt about three years ago and has not been used since. It belonged to my son. He bought it from a friends father and used it in his shop for about five years before he had it rebuilt. Turns drums and rotors. It has new bands for turning rotors and drums new drive belt and all new boots. Plenty of adapters. There are three more adapters mounted on the rotor on the lathe. My

$1,000.00   1 week ago
Werner Ladders & Scaffolding Set - $1000

Two Each - 32' LaddersTwo Each - Short Body Ladder JacksOne Each - 10' to 17' ScaffoldingOne each - 20' LadderAll Werner Brand.In super great shape, garage kept.Only used a few times.Selling all as a set.Great price for set at $1000.00.Did price check Lowes and Lowes online.Thanks!

$8,895.00   2 weeks ago
Komatsu Forklift - 4000 lb LP Clutch Truck - $8895 (Centerton)

Komatsu Propane ForkliftSpecifications:• Manufacturer: Komatsu• Model: FG20C11• SN: 4622044 • Capacity with upright vertical: 4000lbs. / 130• Approximate truck weight as equipped: 7390 lbs.• Mast Height 84"• Fork length: 42"• Hours - 6980• This machine is ready to ship. • Fresh tune-up• Fresh Paint• New Seat• This machine has been painted, new decals applies, serviced, an

$5.00   2 weeks ago
dremel blades - $5 (Cabot)

Dremel moto saw blades. Each pack has (2 pack) 10 blades. $5.00 eachcall or text. no emails please.

$9,395.00   3 weeks ago
2002 Yale Propane Forklift with only 2689 hours and new tires - $9395 (Centerton)

2002 Yale Propane ForkliftSpecifications:* Manufacturer: Yale* Model: GLP040AFNUAF084* SN: B810N02238Z* Year: 2002* Capacity with upright vertical: 4000lbs. / 130* Approximate truck weight as equipped: 6790 lbs.* Mast Height 84"* Fork length: 42"* Hours - 2689* Fresh tune-up* Fresh Paint* New Tires* This machine has been painted, new decals applies, serviced, and is ready to go.* Shipping dimensio

$6,995.00   3 weeks ago
Propane Forklift - Stand Up Dockstocker - Walkie Stacker - $6995 (Centerton)

We have over 400 quality forklifts in stock. *Propane Forklifts*Stand up Dockstockers*Manlifts*Walkie Stackers*Electric Pallet Jacks*Stock Pickers*Batteries have been load tested and reconditioned.*Units have been painted and new decals applied.*Units have been serviced by a certified technician. Quality Forklifts at unbeatable prices!

$10,995.00   3 weeks ago
2006 Yale Propane Lift GLP040 - Only 504 hours - GLP040SVXNUSF084 - $10995 (Centerton)

2006 Yale Propane ForkliftSpecifications:• Manufacturer: Yale• Model: GLP040SVXNUSV084• SN: C80V02129D• Year: 2006• Capacity with upright vertical: 4000lbs. / 130• Approximate truck weight as equipped: 7140 lbs.• Mast Height 84"• Fork length: 42"• Hours - 504• This machine is ready to ship. • Fresh tune-up• Fresh Paint• New Seat• This machine has been painted, new decal

$9,940.00   3 weeks ago
2002 Nissan Propane Forklift PJ02A20PV - Only 5036 hours - $9940 (Centerton)

Nissan PJ02A20PVSpecifications:• Manufacturer: Nissan• Model: PJ02A20PV• SN: PJ02-9H0520• Capacity with upright vertical: 4000lbs. / 188• Approximate truck weight as equipped: 7965 lbs.• Mast Height 84"• Fork length: 42"• Hours - 5036• This machine is ready to ship. • Fresh tune-up• Fresh Paint• New Rear Tires• This machine has been painted, new decals applies, serviced,

$150.00   3 weeks ago
1/2" air impact with extended anvil - $150

1/2" Air Impact with extended anvil.

$100.00   3 weeks ago
Bench-top band saw - $100 (North Little Rock)

Excellent condition; 2 extra blades


Previous 1 2 3 4 5 6 7 8 9 ... 50 Next


Last Updated on: February 26, 2017
0.0716919898987
1488089977.3