Free Local Classifieds in Holland, MI
Search   in
My Location  
> > >

2009 jeep 3.7 v6 bare block / heads / cams / valve covers (buildable) (swmi)

2009 jeep 3.7 v6 bare block / heads / cams / valve covers (buildable) (swmi)

  2009 jeep 3.7 v6 bare block  heads  cams  valve covers buildable swmi

Ad id: 3108178597170098
Views: 8
Contact Us

long story short -
had a knock - replaced with new motor ...
said block was junk ...
so I personally tore down to see what was the real issue at hand ...

all to find out a new crank kit would of solved the problem as it spun a rod bearing and grooved the crank
crank looks no good to me -
the block was never harmed at all as it was shut down when knock started and saved much of this motors parts ...

therefore everything that's left is for sale by the paired pieces or even as a whole torn down basket case rebuildable motor

1) motor block
2) lower motor block plate
3) heads
4) cams
5) rocker arm set
6) bolt kits
7) exhaust manifolds / heat shields
8) intake plenum / throttle body
foam that sits under the intake plenum - guess it was to keep heat off intake to keep gas colder
9) valve covers
10) flex plate / flywheel
11) pistons with connecting rods and wrist pins and caps
12) timing cover
13) gears and chain - tensioners are junk
14) front pulleys
15) wiring harness - two of the o2 sensors plugs was cut as they were not easy to get to on back side of motor and another plug was also cut at time of removal
16) oil filler kneck
17) lower water pump hoes housing
18) front tensioner pulley with idler pulley assembly
19) oil pump
20) oil pump screen and tube
21) whatever else I have not mentioned in posting ...

serious buyers please - it is taking up room at front of shop

i might reason with reasonable / serious cash offers
no low ball offers
i don't need help selling

Similar Items
Last Updated on: February 23, 2018
Report Ad
Contact Poster by Email

Email Poster

Refresh Image