Free Local Classifieds in Chautauqua, NY
Search   in
My Location  
> > >

Gemtop Workmaster utility truck cap - $400 (Falconer NY)

Gemtop Workmaster utility truck cap - $400 (Falconer NY)

  Gemtop Workmaster utility truck cap - $400 Falconer NY

Ad id: 1401181298950537
Views: 6
Date listed 1 month ago

Up for sale is a Gemtop Workmaster utility truck cap that fits 8" box. I believe cap came off 2nd gen Dodge full size pickup (2001 and down). I have been running it on a 3rd gen 2005 dodge and it fits fine although I had to put 1/2" wood spacer between angle bracket shown in picture and the bed. Not sure what others it will fit but will post some dimensions below. Cap has long doors down both sides for bed access the left one has a tinted window in it both doors have strong cylinders that keep them up. Rear has barn type doors with good holders for holding doors open. Cap has a third brake light. Cap is in very nice shape and only damage seems to be some small chips in paint on back panel and doors as seen in pics from highway running. I do not have the key for the locks so if u want to lock it u would have to pop one of the locks out and have a key made. Cap is 400.00 OBO. Can contact thru cl email or call seven16-nine6nine-three77six and leave message.

outside length is about 99 1/2. angle iron in pic actually sits on the rear edge of the bed this is what i blocked up 1/2" for the 05 dodge. tailgate and latch bolts have to be removed. width is about 71 1/2 outside to outside mounts are about an inch less. height of section that has rear doors is about 20 1/2" from bracket that mounts to bed to where it angles out at the top of the bed by the turn signal. this section is about 62" wide. If u have any fitment questions feel free to call and i can let u measure it out yourself.

Similar Items
Last Updated on: February 19, 2018
Report Ad
Contact Poster by Email

Email Poster

Refresh Image