Free Local Classifieds
Search   in
My Location  
> >

Mustang roller in Cars & Trucks For Sale

Filter Search
$1,250.00   1 week ago
83 mustang gt t-top roller - $1250 (Lavonia ga)

83 mustang gt t-top roller was 5.0 5-speed no motor no trans rust free has 8.8 rear w 355 new gears annd new brakes all the way around $1250 cash firm on pickup

$1,500.00   1 week ago
1988 Mustang gt roller - $1500 (delavan)

1988 by original 5.0 5 speed black. Has tinted windows and cervini cobra body kit. Body is clean no rust. Torque boxes are good. Interior is stripped. Comes with red or gray dash. 1500 obi or trades for anything lmkText me at Thanks

$1,500.00   1 week ago
1992 Ford Mustang LX 5.0 5 speed, roller, Clean title, LS Swap project - $1500 (Lawrence, KS)

A 1992 Ford Mustang LX 5.0 5 speed roller. No engine, no transmission, no computer, no computer harness. Just a roller shell as seen in the pictures. Great for a swap project. Frame rails are solid. Paint is faded. Seats have some stains. Rear hatch panels have been cut. Rear deck lid is rusted. 8.8 rearend is included. 11" front factory spindles and brakes are included. Clean title in hand! $1500

$2,400.00   1 week ago
1990 mustang gt roller - $2400

1990 mustang gt roller for sale no engine and transmission came with 8.8 3.73 gears full interior and draglites rims with new tires rear 15x8 front 15x5 clean blue title for mero ing

$3,850.00   2 weeks ago
1986 MUSTANG DRAG CAR ROLLER - $3850 (Sebastian (VLE))

Very Clean!! No Rust!!!! 8.8 Rear End, Adjustable Uppers, Richmond 4.10 Gears, Aftermarket Posi, Competition Engineering Wheel-E-Bars, K-Member, Front Coil Overs, Tubular A-Arms, 10 Point Roll Bar, Wiring Harness, Center Line Wheels and Tires, 26\10-15 M\T, Sub Frame Connectors. Lots More!! Just Ran 9.49 @ 137mph Three Weeks Ago!! Call Me at Race Car!! $3850

$6,500.00   3 weeks ago
93 mustang coupe street / strip roller rust free trade - $6500 (Springfield)

I have my 93 mustang coupe real 5.0 5spd florida car. It's rust/rot free. I bought it 12 years ago and brought it up here from florida. It has never seen snow or rain since I have owned it. Car had an 8 point cage converted to 15 point with X brace as nhra rules required for its speed as time went by. The front end has tubular a-arms, tubular k frame, lakewood struts, coil over conversion, aerospa

$6,500.00   3 weeks ago
93 mustang coupe street / strip roller rust free trade - $6500 (Springfield)

I have my 93 mustang coupe real 5.0 5spd florida car. It's rust/rot free. I bought it 12 years ago and brought it up here from florida. It has never seen snow or rain since I have owned it. Car had an 8 point cage converted to 15 point with X brace as nhra rules required for its speed as time went by. The front end has tubular a-arms, tubular k frame, lakewood struts, coil over conversion, aerospa

$1,500.00   3 weeks ago
1992 Mustang LX hatch roller - $1500 (skippack pa)

92 Mustang LX hatchback original 5.0 Aod car. Emerald green, rust free straight car will need paint due to clear coat fade on hood/roof. Clean title 120k miles. Grey tweed interior with new recovered seats . Car has subframe connectors and UPR torque box reinforcement kit installed. Built 8.8 rear (no miles) 3.55 gears Eaton 31 spline posi and Superior axles. Southside Machine lift bars and tubula

$4,500.00   3 weeks ago
1991 Mustang LX roller super clean 50k mile car - $4500 (skippack pa)

91 Mustang LX super clean car with grey leather interior and excellent paint 50k original mile car always garage kept....2 owner car last owner had for 20+ years. All vin tags. Original 5.0/5 speed all power options factory sunroof car. Absolutely zero rust anywhere....cleanest roller you will find! All factory wiring in car. - Cervini cowl hood - Professionally installed 8 point roll bar with swi

$6,500.00   3 weeks ago
93 mustang coupe street/strip rust free roller TRADE - $6500 (Springfield)

I have my 93 mustang coupe real 5.0 5spd florida car. It's rust/rot free. I bought it 12 years ago and brought it up here from florida. It has never seen snow or rain since I have owned it. Car had an 8 point cage converted to 15 point with X brace as nhra rules required for its speed as time went by. The front end has tubular a-arms, tubular k frame, lakewood struts, coil over conversion, aerospa

$500.00   3 weeks ago
85 mustang gt roller - $500 (wilkes barre)

car was 5 .0 5 speed still has pedals in it has frame connectors now 4 lug car again lug come on turbine or 10 hole wheels newer gas tank nice towers floors and torque boxes it does have a 302 id sell with or without car for 500 302 e cam edelbrock intake new holley carb bbk long tubes for an extra 50 it can come with bell and like new clutch sold with or without car . car is missing seats hood ra

$1,250.00   3 weeks ago
83 mustang gt t-top roller - $1250 (Lavonia ga)

83 mustang gt t-top roller solid rust free floar pans was 5.0 5-spd has 8.8 rear end with new 355 gears and new brakes all the way around $1250 cash firm on pickup

$450.00   1 month ago
solid no dents or dings in quarters mustang roller no motor or trans - $450 (Independence ky)

Interior is there with good air bags even good driver seat rear 1/4 s are good solid in straight .... will have stock wheels. No fenders or bumper motor or trans. For $450 Thanks. I also have parts to fix it if needed. If With fenders n bumpers in lights $700 thanks ...I was planning on 351 or 302 in body kit . was not wrecked just tooken apart .

$2,250.00   1 month ago
Mercury Capri 83 RS Ttop and 86 Roller (Mustang Foxbody) - $2250 (Cantonment)

I have 2 Mercury Capri's that come as a package deal. The 83 is believed to be an RS as indicated from Badge inside and it has the 5.0 HO motor looks to be original, it will crank and it is a 4 spd car, the 83s came with that configuration. There is some rust in this car, but it can be fixed. It has the halo seats with the mesh. The Weld wheels currently on the car will not come with the car, it h

$600.00   1 month ago
1986 Mustang Gt "Roller" no engine, trans. - $600 (Bridgewater)

""""""HOOD, TACH AND WING ARE NOT INCLUDED IN SALE"""""" CAR COMES ON STOCK RIMS!!!1986 mustang gt with 87-93 front end and quarter windows.Set up for a carbed 302 and 5 speed (efi engine harness and ecu still intact)UPR rear control armsUPR anti roll bar8.8 rear with 373 gearssubframe connectorsIm leaving the exhaust on it. Im sure im forgetting some things great project for someone. even if it w

$2,250.00   1 month ago
1990 mustang gt roller - $2250 (hopkinton)

selling a 1990 mustang gt roller no motor or trans car is 5 lug swapped has 373 rear gears tubular upper and lower control arms lowering springs subframe connectors and torque boxes welded has red and black interior in decent shape comes with brand new radiator car is in decent shape few dings here and there but comes with new parts to fix them underneath the car is rust free really clean only spo

$1,800.00   1 month ago
1992 mustang GT roller - $1800 (Mentor)

I'm selling this mustang as is, it is a complete body and suspension, it has 20,000 original miles on it, still has the original tires from when it was new, the car is super clean, absolutely no rust anywhere, never been rusted, has no wiring, no interior, no motor or trans, no power brake booster and or pedals. It has all the glass, and doors are complete with power regulators, it is a 5 spd car

$1,600.00   1 month ago
1993 Mustang notchback roller - $1600 (Lone jack mo)

Selling my1993 mustang rollerOriginal calypso 2.3 autoSolid car not rusted outComplete opal grey interiorRoller. No motor or transmission. $1600 BOTTOM DOLLAR WILL NOT NEGOTIATE ANY LOWER. I bought to build, have to many projects. Also have a donor 5.0 5 speed car available

$10.00   1 month ago
Wanted: White Mustang Notchback Roller - $10 (google map)

Hey guys, looking for a white 87-93 Mustang Notchback Complete or roller. Might consider other colors looking for a clean car show me what you got money in hand Thanks

$3,000.00   2 months ago
1990 Ford Mustang GT Roller - $3000 (Nome)

I have decided to sell my car as a roller. It's a 90 GT. It has a QA1 tubular k member and sub frame connectors. Rear end has already been built has 4.10 gears. Already has weld drag lite s all the way around. No rust. Clean grey full interior car. Was originally a 5spd manual car. There is no hood on the car as well Clean and clear title. Asking $3000 or best offer.Have a 347stroker built for the


1 2 3 4 5 6


Last Updated on: January 22, 2018
0.0222001075745
2.14576721191E-6