Free Local Classifieds
Search   in
My Location  
> >

Mustang project in Cars & Trucks For Sale

Filter Search
$6,000.00   1 month ago
1967 Ford Mustang (project car) - $6000 (Bloomfield)

Selling my 1967 Mustang project car. Selling it with a 347 stroker crank street/strip comp cam, heads rebuilt with comp cam springs, double roller timing chain, forged internals, new oil pump, roller block with new roller lifters. Engine has been resurfaced checked for cracks and cleaned. It has a T5 world class transmission, new reupholstered seats, edlebrock carburator, it also comes with origin

$750.00   1 month ago
84 mustang project - $750 (Sevierville)

I have a 84 mustang project. It is a full shell with the exception of one fender. It is a t toplease and they are there and intact. Does not have wheels or tires on it. No motor or transmission. I bought the car with the intention of restoring it but have very little time to work on it. Needs some interior. Has part of the stuff to convert to the 87 front clip. Does have a clean title. I can part

Contact Us   2 months ago
1965 Mustang Fastback GT A code project 65 $4000 (Stillwater)

Ok first off, this is a project for an experienced body man. I am selling this to pay medical bills and I have a classic bronco that's half done and would like to drive it someday. The entire rear half of the car (whole roof and about the center of the floor boards back) decoded as a 1965 mustang Gt 289 4v ivy green 4spd fastback. Car was wrecked in 1969 is how the story goes which I believe looki

$1,400.00   2 months ago
2002 Ford Mustang GT project - $1400 (Winnebago/Rockford)

Yet another project I never got around to. The motor is seized and I started to disassemble. Good five speed manual transmission. Body has no rust. Has an aftermarket body kit that when someone painted it did not prep it properly and the paint cracked. Need to completely repaint the car but at least no rust repair is required. Tear in the driver seat otherwise interior is in good condition except

$1,850.00   2 months ago
Mustang project - $1850 (Medical Lake)

For any info please contact Scott for details. show contact info

$7,500.00   2 months ago
1969 mustang fastback project - $7500 (mulvane kansas)

1969 Mustang fastback project, no title, bill of sale only, 302 car automatic, power steering, drum brakes, Quarters, wheel housing, frame rails, shock towers, doors, fenders, roof are all good, passenger floor pans are good, drivers floorpan needs work, torque boxes look good. i have seats, fender extensions and hood. 7500.00 or best offer.

$2,650.00   3 months ago
1968 ford mustang coupe $2650.00 (project) - $2650 (graettinger,ia)

rebuilt 289 motor and c4 trans,rebuilt carb,new wires and plugs,points and condensor,cap and rotor, coil and fuel pump,new wheel cylinders,new front floor pans installed,all glass goof and windows work,lights work,dash gauges work,heater and fan work,wipers work,interior on high side of fair (clean),refurbished gas tank,needs new quarters,have new rear wheel well,have 4 mustang hub caps,this car s

$2,650.00   3 months ago
1968 mustang coupe (project) $2650.00 - $2650 (graettinger,ia)

rebuilt 289 motor and c4 trans,rebuilt carb,new plugs and wires,cap and rotor,points and condensor,coil and fuel pump,new wheel cylinders,new front floor pans installed,all glass good and windows work,heater and fan work,wipers work,lights work,dash gauges work,interior on high side of fair (clean),gas tank refurbished,have 4 mustang hub caps,tires hold air,car still needs work to be road worthy,n

$1,800.00   3 months ago
67 mustang project - $1800 (siler city)

I have a 67 mustang project its a 200ci 6 but i already swapped to 5 lug it does have rust that still needs to be fixed i do have the patch panels for the needed repairs

$6,700.00   3 months ago
1967 Ford Mustang (project car) - $6700 (Bloomfield)

Selling my 1967 Mustang project car. Selling it with a 347 stroker crank street/strip comp cam, heads rebuilt with comp cam springs, double roller timing chain, forged internals, new oil pump, roller block with new roller lifters. Engine has been resurfaced checked for cracks and cleaned. It has a T5 world class transmission, new reupholstered seats, edlebrock carburator, it also comes with origin

$1,800.00   3 months ago
1966 Mustang GT Project Car - $1800 (Spring Lake)

I have for sale a 1966 mustang gt of sorts. Here are the details; I had a 1966 mustang gt that was completely rotted out from head to toe, so I kept everything I could, including the vin. What you see in the pictures is the shell I had bought to replace the rotting carcass with.The history on the shell is slim but I bought it in the middle of Indiana and brought it up here. It is a factory V8 non

Contact Us   3 months ago
1968 Ford Mustang Project Car

1968 Mustang Colorado/California Special Project Some body work done. Lots and lots of new & used parts - 2 Cars worth. Runs with 302 motor - motor runs goodLots and lots of parts. Pair of new side panelsHave 351 Cleveland. Been prepped with 4v heads and all parts None of this will be sold separately.Has factory a/c Rare!I am sorry to see this car go....but haven't the money to finish.best offer.

$1,000.00   3 months ago
98 Mustang V6 Project - $1000 (greeley)

1998 Ford Mustang 3.8L V6 Auto ProjectBought this as a winter project, but now need to sell as got a Pontiac!Engine runs strong but when put in gear it stutters like your pulling off in 4th gear!So got another transmission (pictured) and that will go with it!After more investigating i believe there is an issue with the fluid clutch/flywheelAlso the red panels where replaced due to convenience, not

$12,500.00   4 months ago
1969 Mustang MACh 1 4 or 5 speed project - $12500 (Sandown NH)

For sale not trade and please no brokers. Collector selling an Original Black Jade Metallic with black Interior 1969 MACh 1 351 Windsor V8 4 speed project This MACh 1 has been sandblasted to bare metal and the small amount of rust was cut out and replaced (Battery apron rear floor behind driver seat) Has been painted in black primer sealer. I believe I have ALL the parts, interior panels, new head

Contact Us   4 months ago
1968 Ford Mustang Project Car

1968 Mustang Colorado/California Special Project Some body work done. Lots and lots of new & used parts - 2 Cars worth. Runs with 302 motor - motor runs goodLots and lots of parts. Pair of new side panelsI will include the a 351 Cleveland. Been prepped with 4v heads and all parts, Cherry picker and books/manuals with the asking price of over $6000. None of this will be sold separately.Has factory

Contact Us   4 months ago
69-70 MUSTANG Project car wanted (Any)

Looking for a 69-70 mustang project car - send pictures of what u have - thanks

$1,400.00   4 months ago
94 mustang gt project 5 speed - $1400 (ft morgan)

have for sale 94 mustang gt 5.0 v8 5 speed trans currently not running sold as is project will need towed or trailered .car has been sitting for a while has no exhaust after cats but does have ford motor sports headers wasn't getting spark changed coil now it is changed fuel pump since wasn't getting fuel was making noise but not sucking fuel up changed with pne from summit racing was slightly dif

$7,500.00   4 months ago
1968 Ford Mustang Project Car - $7500

1968 Mustang Colorado/California Special Project Some body work done. Lots and lots of new & used parts - 2 Cars worth. Runs with 302 motor - motor runs goodLots and lots of parts. Pair of new side panelsHave 351 Cleveland. Been prepped with 4v heads and all parts I will include the Cherry picker and books/manuals with the asking price of $7500. None of this will be sold separately.Has factory a/c

Contact Us   4 months ago
1972 Mustang Mach 1 project will take trades

72 Mustang Mach 1. This car is from Salisbury, NC notarized title showing 64,025 miles. Motor is a 302 & turns over buy hand . Automatic transmission, it's a matching number car. Great car to rebuild with low miles. Will need a new front hood, gas tank and some body work, but not bad. It has the rear window shade and spoiler. Tan interior. Willing to look at trades. Thank you

Contact Us   4 months ago
Southern 73 Mustang Fastback project - will consider partial trades

Originally from Georgia, needs restoration completed. 302 with cam, headers, alum. valve covers needs few items to complete. C4 auto trans. Both engine and trans were running and working in donor car. Tons of parts incl. fenders, rare OEM ram air hood, regular hood, front grill, neoprene bumper, interior pieces, all parts must go with car. Very solid. Has new front disc brakes (need calipers), new


1 2 3 4 5 6


Last Updated on: December 4, 2016
0.0747001171112
1.90734863281E-6