Free Local Classifieds
Search   in
My Location  
> >

Hydroplane in Boats For Sale

Filter Search
Contact Us   1 week ago
Wanted, the old hydroplane "Li'l Miss" (Northwest)

I'm still looking for my dad's old boat from Spokane. Missing for 40 years! She might still be sitting in somebody's barn around there. Thanks

$2,500.00   1 week ago
hydroplane - $2500 (warren)

This is a racing hydroplane boat .It is 6ft long in great shape

$1,000.00   2 weeks ago
Hydroplane, Hydro, Racing Boat, Merc Racing Motor - $1000 (Homes Beach)

Vintage Hydroplanes, One is 9' the other is 11'. These are not homemade, these were professionally built and raced. The 11' Hydro is set up with hotfoot for sitting position or kneeling with deadman throttle, Both hydros have complete steering and throttle. The 9' has a painted canvas front deck. The bottom looks like a fine piece of mahogany furniture. The 11' has the removable cowling, all glass

$1,500.00   4 weeks ago
antique hydroplane with 60hp V8 Ford flathead - $1500 (Whitehouse,Tx)

antique hydroplane project. I have a old 136 class hydroplane with 60hp flathead motor. I planed to restore,don't have the time, needs major rebuild, but most of the parts are there and the motor does run. really neat piece of boat racing history. Contact John no email or texting I wont respond.

$500.00   1 month ago
Racing outboard hydroplane - $500 (Maple Valley)

This is one of very few hydros built (in the 1980s) by Krier, who builds all the latest national champion racing runabouts. This boat won the national championship in its class, and set the kilometer straightaway record of 91mph. According to its Hall of Champions owner-driver, for whom Krier custom-built the boat to his specifications, it is an exceptionally good-turning, good-handling hull that

$475.00   2 months ago
Very fast R/C nitro Outrigger hydroplane W/ extras - $475 (Cedar Rapids)

Up for sale is my prized custom .32 pull start nitro R/C Outrigger hydroplane prototype.Built this back in 07, and it only has about 10 runs of 20% nitro model fuel on it.Included are 2 props, with the smaller one only being ran so far.Est. speed with that prop of over 60 mph, and a 20+ ft, rooster tail, with it being definitely underpropped, and the engine not even knowing it was under load !!The

$1,900.00   2 months ago
2011 Clark Craft Hydroplane - $1900 (Utica / Poland)

2011 Clark Craft 10ft Hydroplane marine plywood and mahogany. One layer fiberglass bottom, epoxy sealed in and out. Low use since completion ( 3 times ). Comes with a "rat motor" 1957 mark 20 lower end, Mercury 25hp case with 75hp Evenirude carb. 3 different propellers. Kept indoors except for pictures. Complete package $1900 obo

$27,500.00   3 months ago
Hydroplane Race boat Turbine 200+ MPH triple axle Tilt trailer - $27500 (Springfield)

http://www.ebay.com/itm/112190269165?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

$120.00   4 months ago
hydroplane - $120 (hartland)

RC airboat pacer made by K&S. Air tigre 61 powered. 32"long, 16"wice, 16"tall. Needs some TLC. Great winter project. Fun in the spring. Solid hull.

$250.00   4 months ago
hydroplane RC - $250 (hartland)

Large scale RC pickle fork hydro. 57 1/2" long and 19" wide. Set up weed wacker power. Hull is in great shape. Add appropriate engine. Very empressive and great winter project. Have an engine that can probably be adapted. Any other ?, please call 2four8five6one69four6

$575.00   4 months ago
Very fast R/C nitro Outrigger hydroplane W/ extras - $575 (Cedar Rapids)

Up for sale is my prized custom .32 pull start nitro R/C Outrigger hydroplane prototype.Built this back in 07, and it only has about 10 runs of 20% nitro model fuel on it.Included are 2 props, with the smaller one only being ran so far.Est. speed with that prop of over 60 mph, and a 20+ ft, rooster tail, with it being definitely underpropped, and the engine not even knowing it was under load !!The

$2,200.00   5 months ago
2011 Clark Craft Hydroplane - $2200 (Utica / Poland)

2011 Clark Craft 10ft Hydroplane marine plywood and mahogany. One layer fiberglass bottom, epoxy sealed in and out. Low use since completion ( 3 times ). Comes with a "rat motor" 1957 mark 20 lower end, Mercury 25hp case with 75hp Evenirude carb. 3 different propellers. Kept indoors except for pictures. Complete package $2200 obo

$400.00   5 months ago
Remote control hydroplane - $400 (Marblemount)

Selling my 4 foot remote control hydroplane. Runs really good. Just replaced the battery and has a new charger. Never been crashed since I owned it. It's quick! Selling for $400 obo. Comes with the stand.

$250.00   5 months ago
HydroPlane / Water Tube - $250

This is a brand new HydroPlane Water Tube that has never been used!!!!It's a "GrandStand" made by Sportstuff, and is 8' 2" wide x 6' 10" long.Cost over $500 new.$250/Obo.

$1.00   6 months ago
1991 Nautica Hydroplane fs/ft for a Motorcycle - $1 (Spring hill)

91 Nautica Hydroplane. Extremely rare boat. Powered by a 50hp Evinrude Sizzler.Trailer has new tires, new bearing and new lights..Started to prep the top of the boat to be painted or linered. Took the rub rail off and started addressing the rivets ect ect. Havent gotten too far..Realistically these boats have gone for 10k plus . Seen just the hulls sell for 6k.Considering that its a running projec

Contact Us   6 months ago
Vintage Wood Hydroplane (1960) (Mt. Joy)

"Lil Viking" was hand built of mahogany with oak frame in 1960 with hand built parts. Motor is a 1961 Ford straight 6 cylinder. Had been tuned and has stainless steel gas tank. It ran at 80 MPH.Trailer is restored and ready for the road. "Lil Viking" was one of two rear engine racers built and raced at Port Indian Regatta near Norristown, PA. Racing stopped on the river due to political and enviro

Contact Us   6 months ago
1963 mini hydroplane for sale (Muskegon)

I have this 1963 G.W. invader I'm looking to sell. This is one cool boat, I just don't have a good working engine for it so it's time to pass it on. This was the first year G.W. produced boats. Honestly, I can find very little information on this thing. They seem quite rare. It's an 8 footer and it will hold a 20 horse, maybe larger with ballasts. I don't have a price in mind because I can't find

$2,950.00   6 months ago
12' Mini Hydroplane Race Boat - $2950 (Barboursville)

I hate to do it, but I have to sell my race boat. I built this boat in 2010 and have had a lot of fun on the water with it. It is 12' long with a 5' beam and a Pad-V hull. It is constructed of wood, covered with fiberglass and West System epoxy resin. You can see step by step photos of the construction here: http://www.dillon-racing.com/customerboats/Slomke/index.htmThe boat comes with a 2002 Yama

Contact Us   7 months ago
Very fast R/C nitro Outrigger hydroplane W/ extras

Up for sale is my prized custom .32 pull start nitro R/C Outrigger hydroplane prototype.Built this back in 07, and it only has about 10 runs of 20% nitro model fuel on it.Included are 2 props, with the smaller one only being ran so far.Est. speed with that prop of over 60 mph, and a 20+ ft, rooster tail, with it being definitely underpropped, and the engine not even knowing it was under load !!The

$595.00   7 months ago
Very fast R/C nitro Outrigger hydroplane W/ extras - $595 (Cedar Rapids)

Up for sale is my prized custom .32 pull start nitro R/C Outrigger hydroplane prototype.Built this back in 07, and it only has about 10 runs of 20% nitro model fuel on it.Included are 2 props, with the smaller one only being ran so far.Est. speed with that prop of over 60 mph, and a 20+ ft, rooster tail, with it being definitely underpropped, and the engine not even knowing it was under load !!The


1 2 3


Last Updated on: February 21, 2017
0.0180151462555
2.14576721191E-6