Free Local Classifieds
Search   in
My Location  
> >

Weld on 4 in Auto Parts Sale

Filter Search
$550.00   2 days ago
Weld Wheels with Hoosier Slicks and Tubes Mustang - $550 (Kennewick)

Nice set of 4 lug Weld wheels. 15 x 8 with 5 1/2 backspace. Came off fox mustang. Tires are Hoosier 26 x 9. Tires have 15 passes on them. They have a ton left in them. Went five lug and taller tire is the only reason for getting rid of them. Text at five zero nine 392 one eight nine six.

$1.00   1 week ago
Ford 9" Big Bearing Housing & 31 Spline Axles 11" Brakes - $1 (S.W.Weld County)

Have for sale a 9" 31 spline axle-housing set-up. This is their heavy duty "Diamond Housing' application with the big axle bearings and large diameter 'Beefy' 31 spline axles. The unit measures 60" inside backing plate to inside backing plate and 63" housing flange end to flange end. See pics. Housing is clean with no modifications or extra welding ever done on it and bearings look good and axles

$700.00   2 weeks ago
Weld Draglites - $700 (Blue Grass)

Basicly new set of Draglites here, 15x3.5 front and 15x10 rear with 4.5 backspace. Wheels have about 300 miles on them, front tires are same, they have brand new in package McGard lugs at about 120.00 alone, excellent shape just bought some new Forged RTS wheels and don't need them. No scuffs or scratches and small ford pattern has not been used just chevy pattern. Also have plugs for unused bolt

$5.00   2 weeks ago
Air Cleaner Air Filter Assemblies - $5

I have 3 different complete air cleaner assemblies. All are ready to install, I have cleaned and made sure their seals were perfect. I only bought stuff that is water tight so I could use for snorkel attachment. Any of these would be perfect for a buggy, airboat, mudder, etc project. If you see it, I have it, don't send replies asking that or I just delete them. My prices are firm.Original applica

$1.00   3 weeks ago
Ford 9" Big Bearing Housing & 31 Spline Axles 11" Brakes - $1 (S.W.Weld County)

Have for sale a 9" 31 spline axle-housing set-up. This is their heavy duty "Diamond Housing' application with the big axle bearings and large diameter 'Beefy' 31 spline axles. The unit measures 60" inside backing plate to inside backing plate and 63" housing flange end to flange end. See pics. Housing is clean with no modifications or extra welding ever done on it and bearings look good and axles

$3,000.00   3 weeks ago
92 mustang coupe (roller only) - $3000 (Jackson)

92 mustang coupeno motor or transmission90/10 / lakewood struts up frontLakewood drag shocks on rear8.8 rearend with 4.10 gears3" fiberglass hood with little damageweld wheels with new front skinnies like new nitto drag radials rearsub frame connectorsno front seats but does have rear interior is niceasking $3000 no trades acceptedCash is KING

$550.00   3 weeks ago
2010-2017 Dodge Ram factory projectors - $550

Selling my factory Ram projector headlights. They worked great when removed. Went with custom built lights. Nice shape overall only flaw is One mounting tab on each light broke off while in storage. Easy fix to plastic weld back together. Other then that no issues.Tags: pulling, puller, 1978, 1979, 1976, 1969, 1965, f350, nv5600, Nv 5600, the buck, crawler, hauler, trailer, gooseneck, cage, rock,

$350.00   1 month ago
Small Block Ford C-6 Transmission - $350 (Litchfield, CA)

This is a fairly rare C-6 from a 79 F100, with a 302. These engines usually came paired with a C-4, making this a much more desirable option for performance builders. This transmission will mate with Ford small blocks, i.e. 289, 302, 351w, etc. At some point in the past, the bellhousing had a crack that was repaired, it looks to be professional and probably stronger than stock. You can see the tig

$300.00   1 month ago
2 Weld Wheels 15X10 - $300 (Ramer Tn)

Two 15X10 weld wheels with a 6 1/2 backspace. 5 on 4 1/5 and 5 on 3 3/4. Small Ford and small Chevy. Located in Ramer Tn

$50.00   1 month ago
Jeep cj gas tank new - $50 (Niceville)

Have a 4 month old jeel cj 15 gal fuel tank with sending unit premired with black epoxy primer. I added fuel injection to my jeep and had to weld bungs on it so i didmt use this one since i had been running it and it had gas in it. If you can use it come get it its in new condition. No rust no surprises. No bad gas in it .

$100.00   1 month ago
Weld wheel look a likes pacer 15x10 rear draglites - $100 (Sebring)

Wheels look nice. Had on 66 Chevelle. Tires come with but I wouldn't run them. 15x10 with 4 inch back space. 5 on 4 3/4 bolt pattern fit any Chevy car or s10. Hot rod drag car race car street

$1.00   1 month ago
87-93 mustang parts - $1 (Cicero)

Have factory A3M ecu from 93 mustang LX. ECM is the same as A9L. Also have a fiberglass wiper cowl. Cowl needs painting and perferated metal (mesh) to cover opening. Also have (2) 15x8 rims. Look like weld draglites but not welds. 4 x 4.25 lug pattern with 5.25 backspacing. They have tires on them 265/50R15 futura super sports. Have some amount of tread left. Come with center caps and new lug nuts

$350.00   1 month ago
Small Block Ford C-6 Transmission - $350 (Litchfield, CA)

This is a fairly rare C-6 from a 79 F100, with a 302. These engines usually came paired with a C-4, making this a much more desirable option for performance builders. This transmission will mate with Ford small blocks, i.e. 289, 302, 351w, etc. At some point in the past, the bellhousing had a crack that was repaired, it looks to be professional and probably stronger than stock. You can see the tig

$150.00   1 month ago
Chris Alston Rear Sway Bar - 4 Link Rear - $150 (Stockton)

This is a lever splined race sway bar for the rear of a car. Came off a Camaro with the Alston Fab9 rearend. Has alum levers and adjustable alum shock mounts with weld on cross tube- measures 33" wide. Bar is 1.25" Dia splined.

$650.00   2 months ago
MUNCIE 4 SPEED - $650 (RANDOM LAKE)

MUNCIE 4 SPEED. APPEARS TO BE 1963 OR 1964. DO YOUR HOMEWORK ON MODEL AND APPLICATION. CALL ANY TEXT OR EMAIL WILL BE IGNORED.NEVER HAD ANY WELD REPAIRS. THIS ONE IS VERY NICE.

$680.00   2 months ago
Weld wheels 16x10 welds $680 - $680 (Newman/Patterson)

Weld racing stone crushers WITH CONE CAPS. 6 LUG chevy/toyota ett. No cracks. (Need polishing) on 35"tires at about 40% tread left. 6x6.5 lug pattern. All 4 rims and tires with all 4 center caps. Will not sell separate. $680 obo. Or trade. IF ADD IS UP WHEELS ARE STILL FOR SALE. call/text any time

$115.00   2 months ago
Rear G body frame braces - $115

Rear upper and lower frame braces for a G body car Lower control arm frame braces.1/4" thick materialEliminates the possibility of tearing the stock mounts out on hard launchesFits 78 to 87 G body carsThese are sold in PAIRSUppers Reinforce the upper stock frametig welded 1" tubelaser cut platesWeld in

$1,600.00   2 months ago
Weld Mangum mt tires new pro street - $1600 (Rome)

New weld magnum wheels 15x3 1/2 and 15x15 3 1/2 backspacing 5x4.75 bolt pattern new mt sportsman Sr radial tires 29x18x15 and front runners all new still have tits on them. $1600 or may trade for 55 chevy parts bbc parts torq trust wheels Muncie 4 spd or other hot rod parts 706-33one-9417

$20.00   2 months ago
Chrome Exhaust Tips - $20 (Jacksonville/Mandarin)

Pair of brand new chrome exhaust tips, bolt on or weld onto tailpipes, 1 3/4 " diameter, would not fit my tailpipes, use on car, truck, motorcycle $20 for the pair. Call or text if interested in buying.

$300.00   2 months ago
Ford Racing Fox Body & Mustang 5 Lug Conversion Kit 79-93 & MISC - $300 (PS)

No longer available from Ford Racing and when available it was $899. 5 lug conversion kit for 79-93 Mustang and other Fox bodies. Used for less than 5K miles. 5 lug, 11.5" rotors (stock 5.0 is 10.2") with 73mm calipers (stock 5.0 is 58mm) and larger, heavy duty spindles/brake pads/brake lines/backing plates. This is the correct kit for proper wheel offset, unlike the SN-95 kits which limit the wid


1 2 3 4 5 6 7 8 9 10


Last Updated on: July 26, 2017
0.140738010406
9.53674316406E-7