Free Local Classifieds
Search   in
My Location  
> >

Used chevy nova for sale in Auto Parts Sale

Filter Search
$100.00   1 week ago
New Chevrolet Front Right Fenders! - $100 (Mobile)

I have Chevrolet Front Right Fenders for sale from a store closing. Prices are below any prices found online. If you find it cheaper let me know and I will match and go below your price so prices are somewhat negotiable. The first set of letters and numbers are the part numbers so you can search fit and price. All of my fenders have been sitting in a warehouse for a bit and are slightly dusty! Ple

Contact Us   2 months ago
1970-74 OEM CHEVY NOVA LH/RH SIDE SEMI-COMPLETE FRONT FENDERS (SAN ANTONIO TX)

UP FOR SALE A SET OF OEM CHEVY NOVA RH/LH SIDE FRONT FENDERS. THIS FENDERS CAME OF A 74 NOVA AND ARE OEM CHEVY PARTS. THESE FENDERS ARE USED AND NEED A LITTLE WORK BY THE WHEEL LIP AREA OTHER THAN THAT THEIR IN GOOD WORKING CONDITION FOR YOUR PROJECT CAR OR DAILY DRIVER. THESE FENDERS BOTH COME WITH THE NOVA CHROME FENDER TAGS,HEADLIGHT EXTENSIONS,AND ONE FENDER HAS THE TURN SIGNAL AND CHROME HOUS

Contact Us   2 months ago
1970-74 OEM CHEVY NOVA STEEL HOOD WITH FRONT TRIM AND CHROME EMBLEM (SAN ANTONIO TX)

UP FOR SALE A OEM CHEVY NOVA USED IN GOOD WORKING CONDITION STEEL HOOD WITH OEM FRONT NOSE TRIM AND CHROME EMBLEM. THIS HOOD CAME OFF A 1974 CHEVY NOVA CAR IT'S IN GREAT CONDITION FOR IT'S AGE. IT SHOWS MINOR WORK ON IT BUT HAS GREAT POTENTIAL FOR YOUR DAILY DRIVER OR RESTORATION PROJECT CAR. HOOD IS BEING SOLD AS IS LOCAL ONLY NO SHIPPING. ASKING PRICE IS $600 FOR THIS OEM CHEVY NOVA HOOD PIECE.

$1.00   3 months ago
Misc "hot rod" parts for sale. - $1 (Susanville)

I have a few parts laying around here that I'm not using that could be of good use to someone on their own project. 3.73:1 Summit brand ring and pinion set with installation kit. Fits GM 10 bolt 8.5" rear ends. Was bought specifically for a second gen Camaro, but could be used in any car or truck with that rear end. New in box, $200Barry Grant Speed Demon carburetor. Double pumper 650 cfm, with fa

$500.00   3 months ago
Good Used Chevrolet 350 Engine-for sale - $500 (Mill Creek)

I have a good used motor.......saved from a wrecked 1978 Chevrolet Full Size Blazer..It's basically all there.......less carb. and distributor.......and I think it is a 4 bolt main 350.Price is $500 exchange......or $600 outright.......and it is out and ready to go....For more info.....please call Jon at show contact info....anyday from 9 a.m. to 9 p.m.....thanks.chev chevy Chevrolet smallblock sm

Contact Us   3 months ago
SALE TODAY!! Hot Rod/High Performance Yard Sale

High Performance Yard Sale (Fulton/Minetto) postponed to SUNDAY!!!Second annual high performance yard sale. Lots of leftover stuff from years of building cars from model A to muscle cars. Last year we had several people set up. Bring stuff to trade or sell just contact me if you'd like a spot to set up-the yard is pretty big and the more the better! The sale will start at 8 AM on Saturday August 1

Contact Us   3 months ago
Hotrod/High Performance Yard Sale

High Performance Yard Sale (Fulton/Minetto)safety tipsprohibited itemsproduct recallsavoiding scamsSecond annual high performance yard sale. Lots of leftover stuff from years of building cars from model A to muscle cars. Last year we had several people set up. Bring stuff to trade or sell just contact me if you'd like a spot to set up-the yard is pretty big and the more the better! The sale will s

Contact Us   4 months ago
Bbc 509

Big block Chevy 509 over 770( have dyno sheets) hp, currently runs 6.50's in the 8th and 10.40's in the quarter. In a Chevelle that weighs 3450 lbs, 3700 lbs with driver. Has 430 gear. Want to sell motor, header to header, carburetor to oil pan, water pump to transmission tail shaft, motor is currently in a street car used for grudge racing, motor is very drivable on street does not run hot.we dri

$1.00   4 months ago
turbo parts - $1 (Deltona)

***make offer on everything *** No trades...Up for sale are some NEW parts I got for a project but never used. This is not a kit.....Adjustable blow off valves. BOV. $50ea or $75 for pair .... Oil catch can $25 Turbo timer $20. Oil cooler $25. ...... Misc chrome tubes $50 .................5 bolt turbo exhaust flanges $99 for pair..... Cxracing 2 1/2 " 90 degree v-band turbo flange $125........ T3/

$550.00   6 months ago
Big Block Chevy Heads - $550 (Chester N.y) hide this posting restore this posting

Bbc,Heads 3931063 Matching Chevrolet,Chevy,Factory,Oem,Head,Heads,Bbc,bbc,Camaro,Corvette,Nova,C-10,Malibu,Impala,Carprice,up for sale are a Matching set of Heads that have been completely rebuilt Have not been used since build Zero miles on them all parts new including Valve Job clean castings ready to bolt on and go cruising. I have them listed for less than it would cost you to have your set re

$350.00   6 months ago
1967 283 "Special" Recessed Filter "Nova Only" Block" - $350 (Sacramento) hide this posting restore this posting

1967 Chevy 283 Nova / Chevy II Block - These Blocks were Specially made for 1964-1967 Nova's and Chevy II V8 Cars. They are specific to these cars although some were used in Marine applications! They have a specially cast "Recessed" oil filter boss so the long filter housing's used in those days would not contact the center steering rods. In addition, they used a "Special" Oil Pan, Oil Pump, Oil P

$175.00   6 months ago
Mickey Thompson big block chevy valve covers and spacers gasser - $175 (Alsip) hide this posting restore this posting

For sale polished Mickey Thompson big block chevy valve covers and 1" spacers. I used the spacers to clear roller rockers. went a different route with my car. These will clean up great only ran for 2 years to a few shows. These are the new m/t covers. $175 call or text steve show contact infoTags gasser hot rod rat rod hotrod ratrod drag dragster drag racing street car vintage Mickey Thompson m/t

$25.00   6 months ago
1966 - 1967 Chevy II / Nova trunk mat - $25 (Uncle Joes garage) hide this posting restore this posting

A very nice used GM trunk mat in great condition for 1966 1967 Chevy II / Nova. I accept paypal, and can ship FedEx if needed. Thanks for looking. I am not a retail dealer or shop just a guy with way too many parts and cars. If you want to see all the parts I have for sale just type Uncle Joes garage in the search box under the auto parts for sale section, and don't forget to check out Uncle Joes

$475.00   6 months ago
Painless harness new may sale or trade - $475 (Athens ga) hide this posting restore this posting

New harness never used may sale or trade Deppend on what you have. Trade on go fast parts for big block chevy or 1966 nova parts or 1969 firebird parts or 1962 impala parts but cash is a better may trade for a car or truck body or projectCamaro nova chevelle impala caprice firebird cutlass elcamino

$45.00   6 months ago
Melling M62HV Oil Pump,High-Volume,GM 153/194/215/230/250/292, L4-L6M/ - $45 (Madison) hide this posting restore this posting

This is a used oil pump,see link below for details.http://m.summitracing.com/parts/MEL-M62HV.Also 4 sale complete 8 piece set of chrome door trim for 1968 thru 72 Nova.Also 4 sale 1 groove water pump pulley for 4 and 6 cylinder Chevy.Also 4 sale Engine block mounts for 1962 thru 1965 Chevy II Nova may fit 1966 and 1967 Chevy II Nova.

$200.00   6 months ago
1968-72 Chevy Nova Complete 8 piece set of door frame molding trim - $200 (Madison) hide this posting restore this posting

Original 8 Piece set of door trim for 1968 thru 1972 Chevy Nova.Will also fit doors of 1973 thru 1979 Nova.In reasonable condition but needs polishing.Also 4 sale is a used oil pump,see link below for details.http://m.summitracing.com/parts/MEL-M62HV.Also 4 sale 2 groove water pump pulley for 4 and 6 cylinder Chevy.Also 4 sale Engine block mounts for 1962 thru 1965 Chevy II Nova may fit 1966 and 1

$1,000.00   8 months ago
1967 BBC Chevy 396, standard bore, complete - $1000 (Junction City)

For sale is a complete 1967 date code 396 BBC. The engine is complete air cleaner to oil pan. accesories not included. The block is a 39002406. This is a 1967 only block, although some GM documentation shows it used in late 66 model cars. This block is a two bolt main block, and is stamped "P" and "HI PERF PASS"It is standard bore. It was cast at the NY plant in Nov of 1966, and installed in a car

Contact Us   8 months ago
CORVETTEs , Cars & Parts, Chevelle, Nova ,GM Pts, Allante (Cape Coral)

*****************************************************************************Several Corvettes for parts. And some complete cars. Also a lot of other General Motors Parts listed..............................................................................................................................................................."*****IF AD IS RUNNING I STILL HAVE IT !!!!!!!!!................

$20.00   8 months ago
(4) 1973 - 74 CHEVY 14" HUBCAPS - $20 (South Range, WI)

For sale are (4) used 14" factory original hubcap used on the 1973-74 Chevy. These are good used hubcaps that have been in storage for many years. These were commonly used on models such as: Camaro, Nova, and others. These caps are in nice shape, although they have the normal dings and scratches on them. Not show quality, but definitely not bad for their age. They would still be good for a weekend

$100.00   10 months ago
Small and big block chevrolet parts SBC BBC Hot Rod Muscle Car - $100 (Hampton Area)

I have a bunch of small and mostly big block performance Chevrolet parts for sale here. I also have some chevy truck parts and some other universal hot rod, muscle car odds and ends. Way too many to try and sell individually so I am giving it a go on here before going the ebay route. I have pictures of mostly everything. If your serious and most likely will buy it I can send pics your way. I did a


1 2 3


Last Updated on: December 3, 2016
0.0858919620514
2.14576721191E-6