Free Local Classifieds
Search   in
My Location  
> >

Sbf in Auto Parts Sale

Filter Search
$150.00   5 days ago
sbf msd distributor - $150 (christiansburg)

i have a nice msd billet distributor to fit a carb style sbf it will not fit a efi controlled motor will sale or possibly trade for aftermarket 351 Windsor foxbody parts please text or call 540 392 455four

$250.00   5 days ago
LAKEWOOD SCATTER SHIELD FOR A SBF - $250 (Fallon)

260,289,302,351 Small block Ford Lakewood Scatter Shield with block plate. $250.00. Please "CALL" . Thanks, Al.

$90.00   6 days ago
SBF 289-302 ford HEI DISTRIBUTOR 1 WIRE WITH CAP,ROTOR,COIL - $90 (Concord)

For sale new Hei distributor 1 wire for 289-302 small block Ford. Complete distributor with CAP,rotor,coil..for carburetor engine only. ASKING $90 dollars firm. More info call me at

Contact Us   1 week ago
95 Mustang parts and sbf (Christiansburg)

95 mustang and gt mustang parts, 3.8 engine 150.00, automatic transmission 100.00, strut tower brace 25.00, front or rear bumper covers 50.00 each, cowl trim 25.00, hood 50.00, doors 50.00 each, fenders 25.00, 7.5 rear end 75.00, 5 lug 95 spindles 100.00, 8.8 rearend 200.00, edelbrock nitrous tank 75.00 with bracket, airbags 25.00 each, alternator 40.00, mirrors 30.00 for set, 95 gt distributor 30

$125.00   1 week ago
Comp Cams 1.7 roller rockers and pushrod kit for SBF - $125 (Pearland)

Comp Cams roller rockers and hardened pushrod kit with 1.7 ratio. Used on a previous motor build for less than 100 miles before I changed over to Trick Flow heads. Comp Cams kit part number is RP1450-16. http://www.compperformancegroupstores.com/store/merchant.mvc?Screen=PROD&Store_Code=CC&Product_Code=RP1450-16&Category_Code=Also selling the GT40 heads I used with this setup in anothe

$1,900.00   1 week ago
SBF Victor Jr heads - $1900 (Sacramento)

I have a brand new set of small block Ford Victor jr. heads. they have been staged 2 CNC porting by Fox Lake racing upgraded to 2.08 intake valves 65 cc combustion chamber springs are set up for a 600 lift. These heads were hand put together by Rich at performance engines.Asking 1900 OBO if interested call or text

$25.00   1 week ago
SBF 302 Connecting Rods (13) 5.090" Stock Rods - $25 (Ovid)

Stock connecting rods from late model SBF's ie; Explorer 302's. $25 for all 13 of them.

$40.00   1 week ago
SBF Ford Windsor Power Steering Pump, and Brackets - $40 (Ovid)

Not a clue what exactly this came from, was told in the past it was likely a big-body car bracket. $40

$750.00   1 week ago
1968 289 SBF - $750 (Centerville Indiana)

Machine work is done and ready to be put together. Block is 60 over has flat top pistons. Refurnished Heads, Includes a Eldebrock Torker intake

$75.00   1 week ago
SBF Headers - $75 (Lacey)

Two sets of Headers for a 69 fastback Mustang. Short and longs for a 4spd trans. Will fit 351W

$500.00   1 week ago
1997 f350 2wd transmission sbf - $500 (Grandforks)

I have a 90k mile transmission pulled from a F350 2wd truck with a 5.8 v8 small block Ford.Was told it worked when I pulled it with motor. Keeping the motor. Transmission only for sale Comes with harness and factory torque converter. Asking $500Small block Ford bolt pattern

$395.00   1 week ago
NOS Vintage Cal Custom Hawk SBF Valve Covers - $395 (Bozeman)

I have a set of really nice new old stock 1960's Cal Custom Hawk valve covers for a ford 302/351W. They have a slight bit of oxidation on one end where the box wasn't closed well but are have never been installed. They come with the original box! These are fairly rare valve covers and are perfect for a period correct Mustang build!

$1,500.00   2 weeks ago
OBO❗️SBF ROLLER ENGINE EDELBROCK HEADS AIR GAP - $1500 (Gulfport)

FORD SMALL BLOCK 306ci HAS KEITH BLACK .200 dome PISTONS RUNS ON PUMP GAS THIS IS A ROLLER BLOCK HAVE SET IF EDELBROCK HEADS ARP HEAD BOLTS WITH HARLAND SHARP ROLLER ROCKERS AND EDELBROCK AIR GAP INTAKE...asking $1500..or best offer.....call or text ...

$1,400.00   2 weeks ago
5.0 HO 302 sbf ford engine motor - $1400 (15801)

5.0 Mustang engine, stock bottom end built by machine shop in Pittsburgh, new bearings and rings. Stock valve relief forged trw pistons. XXX roller block, ford racing e cam, crane 1.7 rockers, early trick flow twisted wedge pedestal mount heads. No intake manifold, has about 1500 miles on it since rebuild. $1500

$50.00   2 weeks ago
Sbf bell housing - $50 (Warsaw/North Webster)

Stock ford bell housing for small block NO TRADES CASH ONLY TXT ONLY IF YOU CALL I WILL NOT PICK UP TO MANY SCAMS TEXT ONLY

$300.00   3 weeks ago
Sbf new comp cam 248hr with new springs - $300

I have a new cam and springs for sale. The cam has been out the box to take pics. The cam is a 248hr-14. The info on the cam and springs are in pics. Call or text

$25.00   3 weeks ago
Sbf Valve covers. - $25 (Omaha)

One stock 5.0 valve cover and one Trick Flow valve cover. $25.00 each cash.

$75.00   3 weeks ago
SBF 1968 302 Complete Pulley and Bracket Kit - $75 (Omaha)

This is a complete pulley and bracket set from a 1968 Mustang 302. As pictured. $75.00 Cash. Serious inquiries only. No scammers.

$100.00   3 weeks ago
SBF Roller Cam - $100 (google map)

New CAM - Speedmaster Cam SPE 249.1016 - RPM Range 1500-5500 Duration at .50 Intake 218 Exhaust 224 - Advertised duration 270 int. 26 exh. Valve Lift 1.6 rockers - .513 int/ 513 exh Lob separation 110 Firing order: 1-3-7-2-6-5-4-8 ***This cam is to retrofit a tappet motor in order to run a roller cam (289, 302 or 351W). This cam is so that you can run stock 5.0 lifters and not have the extra expen

$175.00   1 month ago
Ford C6 transmission sbf - $175 (Grove, Oklahoma)

This transmission fits 289,302 with a 6 bolt bell housing pattern. It came out of a 2wd pickup, I think it was a 1978. Comes complete with torque converter, flex plate, sheet metal plate with inspection cover, and bolts. I don't know condition of the transmission, I recommend rebuilding before installing. Call or text.


« Previous 1 2 3 4 5 6 7 8 9 ... 12 Next »


Last Updated on: November 25, 2017
0.0180678367615
9.53674316406E-7