Free Local Classifieds
Search   in
My Location  
> >

Sbc cam in Auto Parts Sale

Filter Search
$550.00   2 days ago
SBC Roller Cam Assembly - $550 (Chowchilla)

Ultra-Dyne Solid lifter small block Chevy roller cam. Model R306/310-4. Lift is .630 intake and exhaust using 1.5 ratio rockers.Crane 11580-1 High Rev KitCrane 11515-16 Roller Tappets (roller lifters)EPWI 1.5 Ratio full roller rockers (new).Moroso Rocker Stud Girdles7/16" screw in studsCall Mike @ five59two833four34High performance, race, street, track, Camaro, Nova, Chevelle, Impala, Corvette, dy

$150.00   3 weeks ago
SBC Solid Roller Cam Threaded Chevy - $150 (Nescopeck)

Small block Chevy solid roller. Was in a 434 dirt car. Threaded for rear drive, if needed. Great condition. See card for spec's

$1,200.00   4 weeks ago
350 sbc Chevy engine. Elgin cam freshly built - $1200 (Paris, TN)

I have a 350 Chevy engine that I built for my dirt track car. I ran it in two races until the season ended. I have since decided to build a new engine with flat top pistons. This is my reason for selling this one. This engine is freshly rebuilt. However it is good and broke in. The engine originally came out of a 1994 Chevy camaro. It was a roller engine. I have changed the cam to a Elgin flat tap

$275.00   1 month ago
Sbc cam/rocker arms/pushrods - $275 (Ubly)

Summit cam/lifter kit for sbc. 284/284 duration 480/480 lift $100 Hardened pushrods. 7.8" long. hardened for use with guide plates $50Comp cams Roller tip rocker arms. Steel, comes with the balls and nuts. 1.6 ratio for 3/8" studs. They are Self aligning $125 All prices are best offer located in ubly mi call or text . All parts have little run time on them

$3,500.00   1 month ago
SBC 383 stroker motor/engine with dart pro 1 heads big cam and accessories - $3500 (Clarksville)

Hello for sale I have a small block Chevy 383 stroker motor. It has dart pro one heads that are aluminum. It has a big cam double valve springs. Roller rockers airgap intake all accessories. I've never had this on the Dyno, but should be between 450 and 475 hp. Not looking for trades just looking to sell. The motor has approximately 7500 miles and is extremely clean as the pics show. Contact Chris

$75.00   1 month ago
SBC COMP. CAM - $75

New comp cam #12-243-3 .480/.498 .226/.234@.050

$1.00   1 month ago
Vortec/SBC LOT Most NEW IN BOX! Heads, Intake,Cam/lifters, Roller Rock - $1 (Horse Cave, KY)

For Sale or Trade: Chevrolet SBC Vortec Engine Parts Lot. I would MUCH rather sell all items together as one lot. However, if a good offer is made I MAY separate.... I'm not sure yet. It just depends on what I get offered. Trade mostly for Hand-held itemS of equal value.Add this kit to your good running bottom end to take your Chevrolet Small Block over 400HP!!As the Ad says I DO NOT WANT to separ

$1,700.00   1 month ago
350 SBC TBI, 4 bolt main, roller cam, rebuilt. - $1700 (SE OKC, ok)

350 SBC, TBI 4 bolt mains # 10243880. reground crank 10/10. hyd roller cam and lifters. New cam, main, and rod bearings. Clyotes timing set SA314S, new Melling HV oil pump M55HV, HD oil pump shaft, Tack welded oil pump pickup tube, I pc rear seal PVT 15111, std bore honed, new rings 139. Felpro gasket set, 1 pc oil pan gasket, Fresh heads # 14102193. for scanners( I will not forward money), call f

$300.00   2 months ago
SBC Crowler Roller Cam with Roller Lifters & and Rev Springs - $300 (lake havasu city)

This is a SBC CROWLER ROLLER CAM with roller lifters and Rev springs with CAM CARD....formally used in a 327 with fulie heads and had Great Top End.Any questions look at Cam CardConsider TRADE FOR CHEVY PERFORMANCE PARTSI need an 850 Holley or Dominator

$125.00   2 months ago
Sbc 2102 cam and lifters new - $125 (S Fredericksburg)

Just decided not to do the engine, figuring it's best to leave it origonal sine the car is and now an antique. It is an elderbrock cam. Call only 540 65six 765zereo

$400.00   2 months ago
SBC Chevy Intake, Cam, Lifters,Push rods, Headers, NEW IN BOXES - $400 (KNOXVILLE)

I have new in the box cam, headers, hardened pushrods and timing chain kit. I bought all this for a project that I never got around to doing and sold the truck.The headers are shorty and come with gaskets and collectors.

Contact Us   2 months ago
NEW SCHNEIDER SBC CAM 420 LIFT (CARSON CITY NV)

Small block chevy hydraulic flat tappet camshaft,part number 256-H,mild upgrade or RV use,420 lift,204 duration @ .050 lift,1200 to 4000 RPM operating range,never installed new cam,$148.99 is the current price from Schneider, make offer, .

$60.00   2 months ago
$125.00   2 months ago
Edelbrock Preformer Plus SBC cam shaft - $125

New in the box Edelbrock 2102, 1957-86 Small Block Chevy Performer Plus Cam & Lifter Kit Performer-Plus Camshaft KitChevy Small BlockHyd.Off-Idle-5500rpmAdv. Dur. 278deg. Int/288deg. ExhValve Lift 0.420 Int/0.442 Exh50 State Street LegalFits small block Chevrolet 262, 267, 283, 302, 305, 307, 327, 350, 383, and 400 V8 engines. We got this as part of a deal on a car we bought, but aren't going

$100.00   2 months ago
SBC Drag Cam and Lifters (Brand New) - $100

I have a brand new comp cam and lifters. Never used, just looking to get rid of some stuff laying around check pictures for cam specs. Give me a call or text at thank you

$50.00   2 months ago
SBC heads, crank and cam - $50 (Watkinsville)

Small block chevy cylinder heads, crankshaft and cam. Came off a running 1973 C10 350. Asking $50 or best reasonable offer. Also includes valves, springs, and hardware which are not pictured. If the ad is up, they are still available.

$150.00   3 months ago
SBC Lunati cam and lifter kit - $150 (Modesto)

Im selling a brand new Lunati Voodoo cam and lifter kit for a small block chevy. Its a mild kit i originally bought for tbi 350 but never installed. I perfer to be contacted by text.

$175.00   3 months ago
Lunati SBC racing cam and lifters - $175 (Myrtle Point)

Lunati SBC racing cam and lifters. Lift 570/590

$100.00   3 months ago
SBC Lunati solid roller cam - $100 (syracuse)

small block chevyLunati 50103solid roller camvery good used conditionthis cam in my sbc 355 in a 3300 lb camarowent 10:80 in the qt..strong camcam only,no lifters$100.00

$50.00   4 months ago
Sbc small block Chevy parts vacuum canister 4 big cam - $50 (Sauquoit)

Vacuum canister (for big cam).AndBox of other misc parts.$50 takes all Call or text


1 2 3


Last Updated on: February 23, 2018
0.0220601558685
1.19209289551E-6