Free Local Classifieds
Search   in
My Location  
> >

Lsx in Auto Parts Sale

Filter Search
$9,800.00   6 days ago
2000 HP Dart block Callies magnum LSX shortblock - $9800

Dart block Callies magnum crank oliver rods weisco custom coated pistons Ready for 2000+ hp boosted application 10.5:1 compression with 64cc heads

$50.00   3 weeks ago
Chevy/GM LSx/LQ4 Exhaust Manifolds - $50 (Modesto)

Two good Chevy/GM LQ4 (6.0 liter) engine (1999 and up 1500HD, 2500 and 2500 trucks, SUV's) exhaust manifolds. No cracks, studs are still good, heat shields in place and tight, in good shape. These are good replacements and will fit 4.8 and 5.3 engines, but from what I've heard flow better than the smaller LSx engine manifolds. I have both left and right, $50.00 the pair, or $35 for just one side.

$250.00   3 weeks ago
New comp cams Lsx ls1 "boost" cam - $250 (Keuka)

I have a cam for sale new in the box. I bought it with a c5 turbo setup but its overkill for what I need. Text me and i can send the spec sheet.

$500.00   3 weeks ago
LSX,LS,LS1,LS6, Weiand Air Ram Intake - $500 (Omaha)

LSX Weiand Air Ram Intake,injectors,fuel rail, throttle body. Throttle body is three bolt corvette perfect for a Ls swap to a F-body setup. $500.00. LS,LSX,LS6,LS1,LS SWAP

$6,500.00   3 weeks ago
6.2L L99 LS3 Camaro LSX LS Swap - $6500 (Pine Bluff, Ar)

L99 complete drop out with 6L80E transmission, ECM and Pedal, less the 45K miles. No Trades!!!$6500

$650.00   3 weeks ago
LS1, LSX LJMS BTR cam kit - $650 (Findlay)

New in boxes Lil John Motorsolutions cathedral port head, stage 3 boost cam kit. Price is FIRM as it'll cost you $684 from his siteI bought this a couple months ago and have only opened the box to verify all parts were what I ordered. Nothing was even test fit. I have since changed my setup (11deg heads) so the kit will no longer work for my setup.Comes exactly as pictured-LJMS stage 3 boost grind

$1,200.00   3 weeks ago
6.0 lq4 2003 lsx - $1200 (Benton harbor)

03 lq4 6.0 complete dropout all accessories HARNESS ECM TAC GAS PEDAL 02s AC WP ALT MAF AIR BOX 167xxx miles when pulled runs good. Cash only in person! $1200 OBO Call or text

$2,500.00   1 month ago
chevy LS 6.0 lq9 lsx built street strip engine - $2500 (dansville)

Lq9 ls 6.0L with comp cam lifters pushrods and springs. 450+ hp on pump gas. Complete holley 850 carb and holley intake. Will consider trades or partial trade.

$1,111,111.00   1 month ago
lsx swaps 5.3 lm7 6.0 lq4 lq9 ly5 lmg 6.2 l92 4l60e, 4l65e, 4l80e - $1111111 (DFW)

I supply several types of LSX swaps all over TX, OK, AR, NM, LA and even some to KS, MO. I sell 4.8, 5.3, 6.0 and 6.2 engines and transmissions. I dont normally sell engines only but from time to time I may have something so dont hesitate to ask. I can also provide you with a few customers for reference.I provide COMPLETE pull outs meaning:1. Engine2. Transmission3. Alternator4. Starter5. ECU6. Ha

$2,500.00   1 month ago
chevy LS 6.0 lsx mild built street strip engine - $2500 (dansville)

Complete LS 6.0 with carb conversion and correct oil pan for gm cars. Carb to pan. Drop in and go. 450+ hp on pump gas. Can hear run before engine is pulled. Comes with holley 850 and holley intake. Comp cam lifters and pushrods and valve springs. Correct flywheel for any gm automatic transmission. Call or text

$1,400.00   1 month ago
2007 LS2 CHEVY GM LSX MOTOR COMPLETE - $1400 (rochester)

2007 LS2 CHEVY LS2 GM LSX MOTOR COMPLETEAvaiable Saturday 2/11/17 for the first showing ... then back in storage til spring...LS2 Motor with Approximately 100k on it.... Complete -(Pan to Intake) Ran and drove fine when pulled out of 2007 Trailblazer SS in the FALL - 400hp/395 ft lbs.6.0L - Aluminum block LS motor ONLY Issue... The ear/tab where starter mounts broke off... I have the piece... it C

$1.00   1 month ago
LSX Harnesses/Programming - $1 (Traverse City)

PRICING:$125.00 - Strip/clean (Remove old loom and unneeded wiring)$100.00 - Re-cover with split loom$130.00 - Re-cover with braided loom$85.00 - Standard Fuse/Relay Block $110.00 - Waterproof fuse box (WIRED)***See Photo Albums for fuse box/block images***$125.00 - PCM/ECM Programming ($75 If your getting harness work done also.)$15.00 - ODB2 Connector (If you don't have one from the donor vehicl

$350.00   1 month ago
lsx/lt1/ ls1 harness rework - $350

I can reconstruct,rewire,or rework your Stock harness into a Stand Alone Harness! We also reconstruct LT1 harness... I start by removing unneeded wires from your pcm connectors to slim it up a bit (smaller cleaner harness).I remove all emission wires and connectors.I delete the two rear o2 sensors. At this point i build a 4 rail fuse box and add 2 relays for the ignition and fuel pump.I also add a

$1,111,111.00   1 month ago
lsx swaps 5.3 lm7 6.0 lq4 lq9 ly5 lmg 6.2 l92 4l60e, 4l65e, 4l80e - $1111111 (DFW)

I supply several types of LSX swaps all over TX, OK, AR, NM, LA and even some to KS, MO. I sell 4.8, 5.3, 6.0 and 6.2 engines and transmissions. I dont normally sell engines only but from time to time I may have something so dont hesitate to ask. I can also provide you with a few customers for reference.I provide COMPLETE pull outs meaning:1. Engine2. Transmission3. Alternator4. Starter5. ECU6. Ha

$1.00   2 months ago
LSX Parts - $1 (Elk Grove Village)

Fbody SLP ram air duct plastic edition $80Fbody adjustable Metco safety loop $100Fbody BMR tunnel brace $50Fbody BMR safety loop $100 ARP LSX Head Studs 234-4317 $200Fbody WS6 Sway bars (front and rear) $80SLP bump stop spacers $25 Baer GTO upgraded calipers straight bolt up $300 oboKatech tensioner 110$ OboRocker arm supports 15$Truck maf 50$New LS MAP sensor $20(2) Ls2 oil pump $50 eachSLP maf $

$1.00   2 months ago
LSX Harnesses/Programming - $1 (Traverse City)

PRICING:$125.00 - Strip/clean (Remove old loom and unneeded wiring)$100.00 - Re-cover with split loom$130.00 - Re-cover with braided loom$85.00 - Standard Fuse/Relay Block $110.00 - Waterproof fuse box (WIRED)***See Photo Albums for fuse box/block images***$125.00 - PCM/ECM Programming ($75 If your getting harness work done also.)$15.00 - ODB2 Connector (If you don't have one from the donor vehicl

$40.00   2 months ago
LS1 LSX Vats delete, fan upgrade and limiter removal - $40 (Spring Lake)

So you bought that junkyard 5.3 with harness and pcm etc. And now you need it to start and run in your swap vehicle. Bring me the pcm and I can delete the VATS so it will run standalone. I also can delete the 98 mph speed limiter and update for electric fans.I can NOT do the e40 pcm's unless I use hp tuners. which is 100 bucks for the vin credits to do it. e40's come in 05 Corvette05-06 GTO05-06 T

$200.00   3 months ago
Ls1 LSx turbo headers - $200

Ls up and forward turbo headers, can be mounted high or low. 1 3/4 tubes with 3inch collectors Includes v-bands and clamps. Universal application, can also be used for easy front fender dumps on N/A LS swapped cars $200 located in west fargo Tags ls1 ls2 ls3 ls6 ls7 ls9 lsx 4.8 5.3 6.0 6.2

Contact Us   3 months ago
lsx/lt1/ ls1 harness rework

I can reconstruct,rewire,or rework your Stock harness into a Stand Alone Harness! We also reconstruct LT1 harness... I start by removing unneeded wires from your pcm connectors to slim it up a bit (smaller cleaner harness).I remove all emission wires and connectors.I delete the two rear o2 sensors. At this point i build a 4 rail fuse box and add 2 relays for the ignition and fuel pump.I also add a

$5,800.00   3 months ago
LSX 2 Stage nitrous outlet kit - $5800 (McCalla)

I have a custom 2 stage nitrous kit built by nitrous outlet on a fast 102 LSXR intake 2 purges I have 4 high flow bottles twin billet alum. bracket 6an feed line dedicated fuel system everything is plumed together for a clean install the direct port will flow 600 hp. the plate will flow 400 hp. this kit has never been sprayed this kit has everything needed to make big power more details to serious


1 2 3 4 5 6 7


Last Updated on: April 29, 2017
0.89820599556
4.05311584473E-6