Free Local Classifieds
Search   in
My Location  
> >

Ls6 in Auto Parts Sale

Filter Search
$400.00   1 week ago
243 ls6 heads - $400 (Kinston nc)

I have a set of 243 heads that has 115k miles on them when pulled, nothing wrong with them just need cleaning. $400 cash

$1.00   1 week ago
ls6 intake, pac springs, lq4 stuff - $1 (Findlay)

-ls6 intake manifold with sensors, injectors and rails - $550-04 lq4 truck intake manifold with sensor, injectors, rails and throttle body - $150-04 lq4 (gen 3) stock pistons and rods - $100 (have stock cams, lifters, etc. as well)-stock 317 heads, loaded with everything except rockers - $200-comp cams chromoly 3/8 dia. 0.080 wall, 7.400 length pushrods. Brand new in the box from LJMS, selling bec

$295.00   2 weeks ago
Crower Chevy LS1 LS2 LS6 Camshaft - $295 (la palma)

Selling New Crower Chevy LS1 LS2 LS6 Camshaft, Cam Part #00534. High Performance Racing camsBrand: Crower Cams & Equipment lineNew in box

Contact Us   3 weeks ago
LS1, LS6, LQ4 (6.0), And 6 Speed 4th Gen Camaro Z28 Parts updated (davenport)

My build has gone a different direction so I have lots of stuff to get rid of.LS1/LS6Aluminum 5.7 ls1 block. Cylinder walls are goodConnecting rods and pistonsTexas speed chromoly push rods853 headsTsp .660 pac double springsMagic stick 4 camLs7 liftersMelling high volume oil pumpSLP double roller timing chain + gearsLS1 fuel rails and injectorsLs6 throttle body98 camaro LS1 6 speed wiring harness

Contact Us   3 weeks ago
1970 SS CHEVELLE LS6 DISTRIBUTOR MINT CONDITION (PORT CHARLOTTE)

CORRECT GM ORIGINAL 1970 CHEVELLE SS LS6 DISTRIBUTOR MINT CONDITION

Contact Us   1 month ago
Late model GM / LS parts - LS6 engine, truck heads, PCMs, etc (Springfield, IL)

I pulled these 862 casting heads off of a 2002 LM7 5.3 engine, no problems with them. Asking $100I've got two gen 3 GM computers, both have the IAC driver's for swap cars. Asking $75 each.One is hardware #: 12570558The other is: 12589161These can be programmed for whatever application you've got for an extra cost. GTO fuel rail covers - $50LS6 engine - Disassembled at my machine shop, block and ro

Contact Us   1 month ago
Ls1 F-body Camaro Trans Am parts Ls6 intake manifold (Fort Wayne)

Ls6 intake manifold and LPE ported throttle body $450 SLP loud mouth catback minus clamps and tips $17593-02 Camaro black/clear turn signals. Like new. $20 firmCamaro rear "Berger panel" $25 firmI also have a set of BMR rear lowering springs not pictured $70NO SHIPPING Pick up only. Located in Fort Wayne, In. Text if ready to buy show contact info

$220.00   1 month ago
corvette C6 manifolds 2005 - 2013 Ls1 ls2 ls3 ls6 - $220 (Mankato)

Used c6 manifolds was gonna use on a turbo build.but plans changed $220 comes with 2

$150.00   1 month ago
GM Chevrolet 5.3 Crankshaft LS1 LS6 4.8 6.0 LSx Crank - $150 (Melbourne)

Selling a low mileage 24X crankshaft in excellent used condition. Does not need to be turned or polished, it is ready to run. $150 cash.-John show contact infovortec, chevy, lsx, block, pistons, rods, engine, motor, LM7, L33, LR4, LS3, LS7, LS9, L92 turbo, heads, valves, springs

$250.00   1 month ago
NMW Tow Bar 1970 Chevelle LS6 Camaro Nova - $250 (Clarendon Hills)

Original & complete 46 year old red head paint with gray bars.Still holding it's original CAUTION decal too.Weighs roughly 38lbs.Measures roughly 33 1/8" to 33 1/4" @ mounting tab width.All Hardware included,I took a part for possible shipping quote.Can deliver if within reasonable distance...This is nice and not often found anymore.

$1,500.00   2 months ago
70 LS5 LS6 Chevelle CRV code axle housing - $1500 (Mantorville MN)

1970 Chevelle SS454 12-bolt rear axle housing.Legitimate CRV code 12 12 B 2 dateCRV 3.31 posi large pinion yoke only used in LS5 and LS6 Chevelles.Dec 12th 1969 Buffalo plant 2nd shift.Original gears have been swapped out with Richmond 4.10:1 gears with the thick ring gear to fit 3 series carrier. Bearing caps have been lost, which will require fitting new ones. (Drag racers do this all the time w

$3,200.00   2 months ago
RARE BBC ENGINE REBUILT 3963512 LS5 LS6 CORVETTE - $3200

1970 CHEVELLE LS5 MOTOR STD BORE FACTORY PISTONS ALL STOCK COMP REPLACEMENT LS5 CAM NEW RINGS,HONED,BEARINGS,OIL PUMP,ROCKERS, READY FOR YOUR INTAKE THERE IS A VIN ON THE PAD THANKS. 3963512 512 block also have a real deal ls6 512 4 bolt

$7,000.00   2 months ago
2003 CORVETTE LS6 COMPLETE - $7000 (FROSTPROOF)

2003 CORVETTE LS6 COMPLETE ENGINE. THIS ENGINE COMES COMPLETE WITH ALTERNATOR, A/C COMPRESSOR, STARTER, WIRE HARNESS, EXHAUST MANIFOLD AND COMPUTER. IT HAS 8,996 DOCUMENTED MILES ON IT. I HAVE THE ORIGINAL SALVAGE TITLE AND CARFAX THAT SHOWS THE ACTUAL MILAGE AND ACCIDENT.THIS IS A STEAL AT $7,000.00 TEXT ONLY TO PICKUP I AM UNABLE TO DELIVER. WILL SHIP AT YOUR COST.

$200.00   2 months ago
Lsx parts ls1 ls2 ls6 5.3 - $200 (google map)

Ls2 intake manifold. $200. Cts-v exhaust manifolds with cats $200 5.3 truck oil pan. $50 ls2 cam lifters an push rods $100. 1999 silverado 5.3 pcm $50 Nick

$350.00   2 months ago
Ls6 cam & matching springs - $350 (conway)

Ls6 cam & matching 550lift springs. Bought new for project. Changed direction.

$9,250.00   3 months ago
1970 LS6 motor - $9250 (LHC)

Need a Classic Chevy motor. This is it. Stock bore 1970 454 LS6 450HP from carb to pan. All numbers matching, one owner, Me. 0 mileage. If interested the story can be told. just contact me by phone. Will not reply by Text

$4,200.00   3 months ago
2002 LS6 5.7 liter chevy - $4200 (Yuma)

2002 z06 Corvette engine, 5.7 liter, sump motor, Bored 30 over, balanced. All new bearings, stock cam, 450 HP on pump gas. nine 2 eight five 813 zero four four $4200.00

$500.00   3 months ago
ls1/ls6 Aluminum intake w/ fast throttle body - $500 (dierks)

professional products ls1/ls6 intake. cathedral port with 96mm opening for throttle body. intake is brand new. comes with a 90mm billet fast throttle body drive by cable. 500 for all of it. fuels rails too. text

$60.00   3 months ago
ls1 ls2 ls3 ls6 ls7 lsx camaro trans am corvette throttle body intake - $60 (Iowa Park)

I have a throttle body that came with an ls7 intake I purchased a while back. The throttle body is 90mm. I have no need for this throttle body because I only run cable driven throttle bodies. This, of course, is the drive by wire throttle body. I am asking $60 for it. If interested, please contact me @ Text preferred.

$400.00   3 months ago
MINT LS6 intake,fuel rails,and ported throttle body - $400 (Hoover)

IF THIS AD IS STILL UP,THE INTAKE IS STILL FOR SALE!!!!!!Up for sale is a MINT LS6 intake manifold off a 45k mile 02 LS1 Trans Am. Includes fuel rails and a ported stock drive by cable throttle body. Absolutely no cracks,stripped threads,or repair.1st $400 gets it.Bare intake's are selling elsewhere on the net for $400-$500 so I feel mine is priced very fair.Please don't waste either of our time i


1 2 3 4 5 6


Last Updated on: January 22, 2017
0.0213961601257
9.53674316406E-7