Free Local Classifieds
Search   in
My Location  
> >

Dodge driveshaft in Auto Parts Sale

Filter Search
$75.00   6 days ago
Dodge Plymouth 904 driveshaft - $75 (Farmington)

Driveshaft with Mopar 904 transmission slip yoke. Measures 55.25" from center to center of universal joints and has a diameter of 10.5". This is the driveshaft that is longer and rustler than the other in the photos. $75

$75.00   6 days ago
Plymouth Dodge Ford driveshaft - $75 (Farmington)

This driveshaft is the shorter and less rusty driveshaft in the photos. It has a Mopar 904 transmission slip yoke and a Ford universal joint in the rear. It measures 51" from center to center of the universal joints. It has a diameter of 8.75". I had it in a Plymouth Duster with a 904 transmission and a Ford 9" rear end. $75

$40.00   1 week ago
1997 dodge short bed driveshaft - $40 (West Seneca)

97 1/2 ton drive shaft with yolk

Contact Us   1 week ago
dodge plymouth mopar custom made driveshaft 904//8 3/4//A-body (williamstown)

A body 904 trans to 8 3/4 rear 45.5'' u joint to u joint center, that's not counting yokethe driveshaft was custom made to fit a 8 3/4 rearit came out of my 73 dart when it had a 360//904 in it 125.00 or best cash offer

Contact Us   1 week ago
plymouth dodge mopar 3 inch driveshaft for A body powerglide to dana (williamstown)

A body driveshaft power glide to dana u joint to u joint 46 inch 2 inch off yoke to u joint 49 inch this drive shaft came out of the car in picture its in perfect shape 150.00 or best cash offer

$25.00   1 week ago
1998 Dodge Ram hood hinges and driveshaft - $25 (Mcclure)

Have a set of hood hinges off a 98 Dodge Ram-$25. Also a driveshaft-$40.Text 419-591-663four

$50.00   1 month ago
Dodge Ram driveshaft - $50

I have a 1996 Dodge Ram short bed 4x4 drive shaft it should fit 94-01 short bed Rams that are 4x4 call or text 50obo

$50.00   1 month ago
1995 Dodge 2500 door fender fuel tank driveshaft cummins - $50 (Beaumont, TX)

I have some parts left over from a '95 dodge 2500 cummins 12 valve nv4500 5 speed that I parted out.Passenger Door-$50Passenger Fender-$50Wiring Harnesses-$50NV4500 Shifter-$50Driveshaft-$50Fuel Tank-$50This stuff isn't showroom floor. It came off of a farm truck that was used, so it will have little dents and scratches, but none of it is rusted out.text me, I need this stuff gone1994 94 1995 95 1

$100.00   1 month ago
1999 Dodge Ram 1500 Driveshaft - $100 (Berea,Ky)

Good used factory Dodge aluminum driveshaft.This came out of a 1999 Dodge Ram 1500 long bed two wheel drive with the 5.2 engine and automatic transmission.The shaft is around 68 1/4 " long.I believe this will fit 1996-1999 Dodge trucks but check for yourself to be sure.Asking $100 Cash.

$135.00   3 months ago
Dodge Durango 4x4 AWD Front Driveshaft - $135 (Geneva)

This is new, never installed. I paid 249.99 for it. My loss your gain.

$175.00   3 months ago
Front driveshaft reman still in box for early 2000s Dodge - $175 (Farmersville)

This driveshaft never been installed , fits early 2000s dodge, in pic is the part number to see if it will fit your truck 65-9016 cardone

$150.00   4 months ago
1974 dodge charger driveshaft - $150 (Tuckerton)

1974 Dodge charger driveshaft. This driveshaft fits a small block 727 transmission 318ci. I will take $150Call

$150.00   4 months ago
Dodge rear driveshaft - $150 (Stephens City)

Dodge 2 piece rear driveshaft. Out of 2004 3500 4 door long bed 4wd with manual trans. 1480 series u joints, greasable. Will need carrier bearing. Mounting bracket for it is included. ANY REPLIES WITHOUT A VALID EMAIL OR PHONE NUMBER WILL BE TREATED AS SPAM AND DELETED!

$200.00   4 months ago
2004 dodge ram 2500/3500 front driveshaft for 48re - $200 (kewanna)

Cash, Credit Card or paypal Front drive shaft for dodge ram 2500/3500 4x4 with cummins diesel and 48re trans. Good shape. TEXT PREFERRED cummins dodge ram 2500 3500 diesel pulling puller truck 5.9 6.7 new venture new process 5sp manual nv 241 dld dhd driveshaft bellhousing p7100 cummins dodge diesel ram 2500 3500 pulling puller nv new venture new process 241dld dhd dana 80 70 60 5sp manual speed 5

$100.00   5 months ago
1999 Dodge Ram 1500 Driveshaft - $100 (Berea,Ky)

Good used factory Dodge aluminum driveshaft.This came out of a 1999 Dodge Ram 1500 long bed two wheel drive with the 5.2 engine and automatic transmission.The shaft is around 68 1/4 " long.I believe this will fit 1996-1999 Dodge trucks but check for yourself to be sure.Asking $100 Cash.

$615.00   6 months ago
2003-2013 DODGE 2500/3500 REAR ALUMINUM DRIVESHAFT - $615

THIS IS A BRAND NEW ALUMINUM CONVERSION STYLE DRIVE SHAFT This Shaft will fit 2003-2013 Dodge Ram 2500/3500 Models Please CONFIRM before ordering your shaft measurement from Center of the Slip yoke U-joint to Center of the Flange Yoke U-joint Features: Heavy Duty 5" .125 wall Alco Aluminum Tubing Upgraded 1480/1485 High Quality U-Joints New Flange Yoke Installed New Slip Yoke installed Fully Balan

$150.00   7 months ago
99 dodge 4x4 quad cab 8' bed Driveshaft - $150

this is a hard to find driveshaft cause they did not make a ton of these long bed quads

$150.00   8 months ago
1972 Dodge charger driveshaft with slip yoke - $150 (South Jersey)

1972 Dodge charger drive shaft with a slip yoke. The slip yoke fits a small block 727 transmission tail shaft (318ci). I will take $150 for the driveshaft with slip yoke.call or text

$500.00   1 year ago
2012 DODGE RAM 4500 DRIVESHAFT - $500 (Lancaster corner of 52/1295)

From midshaft bearing to transmission driveshaft....came out of 2012 Dodge Ram 4500 4x4....$500 or trade....

$400.00   1 year ago
01-07 Dodge Dakota front driveshaft - $400

01-07 dodge Dakota front drive shaft.new still in the box.


1 2


Last Updated on: August 24, 2017
0.0328049659729
1.90734863281E-6