Free Local Classifieds
Search   in
My Location  
> >

Chevy 427 in Auto Parts Sale

Filter Search
Contact Us   1 week ago
Chevy 454,502,427,BB engine parts (largo)

have many 454/502 BB Chevy parts Blocks GEN 4,5,6 ,Cranks,rods,pistons,stock and Performance , heads,new cams,used roller cams,Aluminum heads,many intake manifolds including tunnel rams,Msd ignitions,valve covers,roller rockers,push rods,carbs,ETC.... just call and ask see if i got it! also have some Small block parts too!

$30.00   1 week ago
BBC Big Block Chevy Headers, 454, 402, 427, 396 - $30 (Stafford)

I have a set of stainless steel headers that fit a Big Block Chevy. I bought them for my motor home but they don't fit. I bashed one of them to try to fit it, but it was a lost cause. So one of them has some dents in it. The good news is that David Freiburger proved that dented headers don't lose any power on the TV show Engine Masters. Anyway, I can't use them and can't return them so come get th

$1,200.00   1 week ago
Chevy 427 454 # 512 B/B Block only - $1200 (Alma)

I have a Chevy big block, empty block casting # 512 1969 427 and 1970 454 use with a date of May / 1969 .060 fresh overbore ready for final hone it is 2 bolt main but comes with a set of 4 bolt caps. Mike call or txt Alma Ar.

$1.00   1 week ago
Chevy Bare Blocks 283 327 350 400 402 427 454 - $1 (Jonesborough)

I have for sale several Chevy bare blocks. They can be seen at Lethal Performance Speed Shop in Jonesborough, TN. Call for bore size and pricing. We also have new Dart Blocks in stock. Thanks

$8,800.00   1 week ago
NEW 421/427 Small Block Chevy Dart aluminum heads - $8800 (Stockton)

Just built ALL new/fresh built Small Block Chevy, starting with a fully machined 4 bolt main block, Scat forged 3.875/4.00 crank, Scat 6.00 4340 H-beam rods, forged SRP pump gas 10.25-1 compression pistons, moly rings, Dart aluminum heads, Comp Cams hydraulic roller cam and lifters, Edelbrock Air Gap intake, GM signature series cast aluminum valve covers, Crane roller rockers, and more! This engin

$9,500.00   1 week ago
427 434 Dart Small Block Chevy - $9500 (Stockton)

This listing is for a Brand new 427ci SBC, build by Dart Heads (http://dartheads.com/). Since the engine is built by Dart, it starts with a NEW Dart billet cap 4 bolt block, 4.00 stroke 4340 forged stroker crank, 6" H-beam rods with ARP bolts, and forged 4.125 bore = 427ci, or 4.155 bore = 434ci (either pump gas or race gas) pistons. Finish this short block with a set of Dart 215, 225, or 230 head

$3,595.00   2 weeks ago
BIG BLOCK CHEVY 427 ENGINE - $3595 (kernersville)

Big Block Chevy 427 .030 over. mid race- hot street engine. In a 2 bolt 454 block with ported oval port heads.6223 GM steel crank & rods -Manley pistons- roller cam-alum intake. oil pan to intake. call for more infor.

$12,500.00   2 weeks ago
1968 1969 Chevy 427 425hp BBC Rebuilt Long blocks (Rare Opportunity) - $12500 (Osteen)

For Sale. Two total. One 1968 Chevy 427ci 425hp BBC. And, One 1969 Chevy 427ci 425hp BBC. Completely rebuilt by Professional engine builder Tim Weber @Weber's AutoMachine in Sanford, FL. These two beauties we're cared for by a Chevrolet muscle car specialist, they are the real deal, no lies or B.S. here.1968- 427, is the #439, 4-bolt main Hi-Perf block.-Block casting#F 14 8-Built .30 over-Solid Li

$12,500.00   2 weeks ago
1968 1969 Chevy 427 425hp BBC Rebuilt Long blocks (Rare Opportunity) - $12500 (Sanford, Fl)

For Sale. Two total. One 1968 Chevy 427ci 425hp BBC. And, One 1969 Chevy 427ci 425hp BBC. Completely rebuilt by Professional engine builder Tim Weber @Weber's AutoMachine in Sanford, FL. These two beauties we're cared for by a Chevrolet muscle car specialist, they are the real deal, no lies or B.S. here.1968- 427, is the #439, 4-bolt main Hi-Perf block.-Block casting#F 14 8-Built .30 over-Solid Li

$12,500.00   2 weeks ago
1968 1969 Chevy 427 425hp BBC Rebuilt Long blocks (Rare Opportunity) - $12500 (Sanford)

For Sale. Two total. One 1968 Chevy 427ci 425hp BBC. And, One 1969 Chevy 427ci 425hp BBC. Completely rebuilt by Professional engine builder Tim Weber @Weber's AutoMachine in Sanford, FL. These two beauties we're cared for by a Chevrolet muscle car specialist, they are the real deal, no lies or B.S. here. 1968- 427, is the #439, 4-bolt main Hi-Perf block.-Block casting#F 14 8-Built .30 over-Solid L

$100.00   3 weeks ago
Chevy 366-396-402-427 Crank - Casting #815 - Std / Std - $100 (Sacramento / North Highlands)

CHEVY 366-396-402-427 Factory GM Crankshaft - Crank Forging # 3904815 and no spun bearings or wiped-out Thrusts. The crank is STANDARD on the Rods and Mains and needs to be turned. ONLY $100.00 - CASH ONLY! I Also have THREE 454 Cranks cranks For Sale. I've put My HP AUTOMOTIVE MACHINE SHOP up For Sale - Lease, so I am liquidating most of my personal Collection of Blocks, Heads, Cranks, Rods and r

$600.00   3 weeks ago
Turbo headers BBC Chevy 396 427 454 496 502 - $600 (Yuba City, CA)

Stainless turbo headers, up-n-forward design for Big Block Chevy. Fit under stock flat hood on Chevelle, Camaro, Nova too. Big 2" primaries, so you'll need to use a pair of Borgesen U-joints for setting up your steering shaft (VERY common practice on 99% of Streetrods, not difficult). Great spark plug access. Would work nicely in a flat bottom/v drive/jet boat too. These were probably $1600 new! $

$3,750.00   3 weeks ago
427 Chevy engine - $3750 (720 Kenaston Dr. Coldwater mich)

Needs rebuilt. Right for 1967 corvette. or impala

$8,800.00   4 weeks ago
NEW 421/427 Small Block Chevy Dart aluminum heads - $8800 (Stockton)

Just built ALL new/fresh built Small Block Chevy, starting with a fully machined 4 bolt main block, Scat forged 3.875/4.00 crank, Scat 6.00 4340 H-beam rods, forged SRP pump gas 10.25-1 compression pistons, moly rings, Dart aluminum heads, Comp Cams hydraulic roller cam and lifters, Edelbrock Air Gap intake, GM signature series cast aluminum valve covers, Crane roller rockers, and more! This engin

$9,500.00   4 weeks ago
427 434 Dart Small Block Chevy - $9500 (Stockton)

This listing is for a Brand new 427ci SBC, build by Dart Heads (http://dartheads.com/). Since the engine is built by Dart, it starts with a NEW Dart billet cap 4 bolt block, 4.00 stroke 4340 forged stroker crank, 6" H-beam rods with ARP bolts, and forged 4.125 bore = 427ci, or 4.155 bore = 434ci (either pump gas or race gas) pistons. Finish this short block with a set of Dart 215, 225, or 230 head

$3,300.00   1 month ago
1967 Chevy 396 427 Heads 3904391 Rectangle Port - Complete - $3300 (Bartlett, TN)

For sale is one pair or Chevy 396 427 heads 3904391. The dates are J106 and G96. They are fully assembled and came off a running engine. They are in "as removed" condition. If you have any questions, please email or call me at . Thanks for looking.

$1,500.00   1 month ago
1991-1995....."427" Tall Deck Big Block Chevy - $1500 (RANDOLPH, NY)

Just pulled out of a Chevy truck , it was a new Jasper replacement with 12k miles on it now.....comes complete with wiring harness and PCM..........There is no flywheel as that was sold with the transmission.Sold "AS-IS" .....Excellent for a drag car or boat project!Call / Text Jim: .........Located in Randolph, NYPrice: $1500 or Best OfferGM # 10114184

$225.00   1 month ago
Big block chevy 427 turbo jet valve covers - $225 (East Stroudsburg)

Big block chevy 427 turbo jet cal custom valve covers made in USA brand new in box 225.00 pair

$5,500.00   1 month ago
Chevy Big Block 427 Roller Motor - $5500 (Amherst VA)

Chevy 427 +060 roller drag motor. Ran 6.70 in 3500lb foot brake Camaro on small 10" tire at Natural Bridge. Intake to oil pan. Does not include water pump, pulleys or brackets.Iron closed chamber 840 heads, Raised dome 12 to 1 pistons. Forged crank with 366 truck rods and ARP rod bolts. Comp Cam .714 lift roller tappet cam. Stud girdles. Holley square flange raised plenum intake by Weiand. 5000-70

$200.00   1 month ago
1968-1976 427" Chevy truck cylinder heads Casting # 3933148 - $200 (Bridgeport s/w Chicago)

Pair of 427 Chevy truck heads. Casting # is 3933148 Casting dates are K11 8, and K13 8. That comes out to November 11 1968, and November 13 1968. The pair consists of the 2 castings, with valves, and valve seals. These items were worked on by a shop, but never finished. Items are located in the Bridgeport neighborhood on the s/w side of Chicago. Thank you.


1 2 3 4 5 6 7


Last Updated on: December 13, 2017
0.0267040729523
1.90734863281E-6