Free Local Classifieds
Search   in
My Location  
> >

460 big block ford in Auto Parts Sale

Filter Search
$1,000.00   1 month ago
Mid 80s Ford 460 Big Block 50k miles "LIKE NEW" - $1000 (Woonsocket)

we have a ford 351 Windsor engine removed from a 1985 ford f250 motor may have been rebuilt but can not verify that but was a good running motor. comes complete has 2 barrel carburetor. Call: or

$1,000.00   1 month ago
Mid 80s Ford 460 Big Block 50K miles "LIKE NEW" - $1000 (Woonsocket)

we have a mid 80s ford big block 460 engine with Holley carburetor this engine has only 50k miles and runs mint. come complete removed from a ford motor home chassis. also have c6 transmission as well. very nice clean motor. $1000 obo Call: or

$400.00   1 month ago
Big Block Ford 429 460 - $400 (Benton City)

Big Block Ford 429 or 460 have not checked stroke so can't be sure. I bought a whole truck just for this motor, then ended up not needing it. Motor is very strong. Sounded and ran great, does have start up puff smoke so it needs new rubber valve stem seals. 4 Barrel intake. Sold as you see it with cradle.$450 cash only firmBlock # D1VE A2BHead # D3VE A2ABBF 302 351 400 390 FE 428

$500.00   2 months ago
Ford 460 Big Block with D0VE Heads - $500 (Rogue River)

For sale: Ford 460 big block motor. 1971 block, I think. Disassembled, and ready to be put together. D0VE heads, 2 cranks, boxes of parts, gaskets, pistons, 2 sets of rods, and more. Clean it up and it's ready to be assembled.Asking 500 OBO.

$250.00   2 months ago
Ford 460 Big Block, Needs Rebuilt - $250 (Edinboro / Meadville)

Hello,This Carbureted 460 motor is complete however one cylinder is seized. The engine is pulled and on a stand. Can be delivered if near or further for a fee.I may be open to trade. Looking for shop tools or a large outboard motor. I will post pictures later. Feel free to contact me with any questions.

Contact Us   2 months ago
SUPER CHEAP - 460 FORD BIG BLOCK PERFORMANCE PARTS (Spring Lake)

NOW SELLING PARTS INDIVIDUALLY.... Just tell me what you need and I'll work with you on the price. These parts are brand new and unused, still in packaging but I'm not asking "new" prices. All internal components listed below have remained in their original packaging since I purchased them and they've all been stored inside my house, away from bugs, dirt, and moisture. Everything I have is MINT an

Contact Us   4 months ago
Big Block Ford 429-460 Parts (Ohatchee, AL)

I'll update this posting with more parts and actual photos when I have time throughout the week. I bought these for a Bronco conversion I had planned but have decided to do another project. Text and email preferred. I do not need help selling. Open to trades, just let me know what you got. Looking for a good set of 265/75R16 Mud Tires.New Edelbrock Performer Intake Manifold #2166New 460 Main and R

Contact Us   4 months ago
Ford 460 Big Block L&L Ultra Flow Nickel Plated Headers (Ohatchee, AL)

These are the Electroless Nickel Plated that are no longer available from L&L. I bought these to convert a 1980 Bronco over to a Ford 460 but never got around to it. New never installed. I do not need help selling. Open to trades. Looking for a good set of 265/75R16 Mud Tires.#79760AP 1980-96 F100/F150 1980-87 Bronco 1980-97 F250/F350 Carburated Motors Only1/2" Thick Flange 1 3/4" Primary Tubes 4

$300.00   4 months ago
1972 FORD 460 BIG BLOCK - $300 (MIDDLETOWN, NY)

UP FOR SALE IS 1 FORD 460 BIG BLOCK.. TURNS OVER BY HAND WITH GOOD COMPRESSION.... WAS TOLD IT RUNS BUT I NEVER HEARD IT RUN.... SEE PIC OF TAG... 460 == 72 == 9 == 16== K866 == 8.........................CALL BEFORE 7:00 PM... I DON'T DO TEXT

$350.00   5 months ago
Ford V8 460 Big Block engine - $350 (Waverly) hide this posting restore this posting

IF THIS ADD IS UP - IT IS STILL FOR SALE I removed this from a 1978 4x4 Ford van in 2007 - it had 39,000 original miles (NOT 100 and some, actual mileage 39,000) and ran well. I did not like the low gas mileage it produced so I replaced the engine with a less gas consuming engine.I've kept it safe in the corner of my garage thinking I would put it in a small ford and race it, but that isn't gunna

$2,800.00   6 months ago
Big block 460 ford engine - $2800 (Wellsburg) hide this posting restore this posting

ford 460 engine bored over 40 engine runs great selling complete turn key. You can here it run and drive it and if you buy it I will pull it out of truck same day! Selling because I'm turning truck in to mud truck and building a bigger engine

Contact Us   6 months ago
460 big block ford hide this posting restore this posting

460 ford i got it from junkyard had it in a 1978 ford truck did runthen i took it out an put a 400 in nothing wrong with it what you see iswhat you get $450obo

$150.00   10 months ago
1979 460 big block ford - $150 (mims)

Its been sitting in the weather will definitely need work no doubt but is well worth what I'm asking has slightly used rv cam new valve springs its taken apart been sitting out side d3ve a2a heads are 400 alone yeah they have surface rust but valves are fine its well worth $150 text me for pictures at

$1,000.00   10 months ago
$125.00   10 months ago
$125, Big block 460 Ford Crankshaft

I REGRIND KRANKSHAFTS 400 DAYS A YEAR. I REALLY KRANK THEM OUT. PICTURED FIRST IS A LATE 1979-2001 PRECISION REGROUND 460 FORD KRANKSHAFT AT MY SHOP READY FOR $125.00 EXCHANGE. THE CASTING NUMBER IS 3Y IT IS REGROUND WITH AN ITALIAN STATE OF THE ART HYDRAULIC DRIVEN GRINDER WITH ALL THE BELLS AND WHISTLES. MY EXCHANGE KRANKS ARE GROUND ONLY TO THE FIRST AND/OR SECOND UNDER SIZE WITH NO WELDS. I CA

$45.00   12 months ago
timing cover for big block 429 / 460 Ford engine - $45 (ne ohio)

for sale is an original Ford timing cover from a big block 429 / 460 engine, D2VE casting #s, it includes the original timing pointer for $45 as pictured, thanks!

$500.00   1 year ago
Ford 460 Big Block - Fresh .030" machined over - $500

Freshly machined .030" over with cam bearings installed.

$500.00   1 year ago
Ford 460 Big Block L&L Ultra Flow Nickel Plated Headers - $500 (Ohatchee, AL)

These are the Electroless Nickel Plated that are no longer available from L&L. I bought these to convert a 1980 Bronco over to a Ford 460 but never got around to it. New never installed. I do not need help selling.#79760AP 1980-96 F100/F150 1980-87 Bronco 1980-97 F250/F350 Carburated Motors Only1/2" Thick Flange 1 3/4" Primary Tubes 4 into 1 Header

Contact Us   1 year ago
Big Block Ford 429-460 Parts (Ohatchee, AL)

I'll update this posting with more parts and actual photos when I have time throughout the week. I bought these for a Bronco conversion I had planned but have decided to do another project. Text and email preferred. I do not need help selling. Open to trades, just let me know what you got.New Edelbrock Performer Intake Manifold #2166 - $225Used Edelbrock Performer Intake Manifold #2166 - $175Trick

$200.00   1 year ago
460 big block ford - $200 (Ridgeway)

Good block heads and crank, was going I build a 512 stroker but lost interest


1 2


Last Updated on: December 4, 2016
0.048201084137
1.19209289551E-6