Free Local Classifieds
Search   in
My Location  
> >

100 bolt in Auto Parts Sale

Filter Search
$100.00   1 week ago
350 CHEVY 4 bolt main block - $100 (Hanover, MI)

This is standard bore 4 bolt main Chevy block and has been seasoned...

$100.00   1 month ago
$100.00   1 month ago
Magnaflow Bolt On Catalytic Converter 23479 For 88-92 Camaro/Firebird - $100 (Beavercreek)

Magnaflow Direct Fit Catalytic Converter is designed for easy bolt-on installation. It features a ribbed design, a funneled inlet and outlet which renders a customized fit. This converter consists of stainless steel body and heat shield. It requires no cutting or bending.Exhaust is Brand New, Box was opened but never installed, Retails for $448

$100.00   1 month ago
2007 cobalt 5 bolt aluminum rims with like new tires (Pair) - $100 (Blanchard)

tires and rims very good condition. $100 for pair

$100.00   1 month ago
Chevy 10 bolt Rear End - $100 (Sharpsville)

For sale or trade a mid 70's Chevy 10 bolt rear end I believe it is a 3.23 open (non posi) gear. I bought it to puit under an older pickup I am building but I found a disk brake rear I like better. No brake drums or shoes. I WOULD LIKE TO TRADE IT FOR AN EDELBROCK 1406 CARBURETOR or $100 OBO

$100.00   1 month ago
Oldsmobile 12 bolt rearend - $100 (Victorville)

Bracket/mount has been cut off. Make me an offer I cant refuse. Text only please.

$100.00   1 month ago
RARE cal custom chevy 12 bolt cover - $100

Rare cal custom finned aluminum 12 bolt rear end cover.

$100.00   1 month ago
Gm 10 bolt truck posi 3.73 - $100

Must go quick my loss is your gain good ring and pinion goes with it . It came out of a 82 blazer

$100.00   1 month ago
chevy 12 bolt rear - $100 (Montoursville)

this is an open differiental. It has a 34 tooth ring and a 10 tooth pinion= 3.40. Came out of a 80's chevy truck that was pieced together. Also have front axle

$100.00   1 month ago
350 2 bolt main (SBC) - $100 (Daingerfield)

350 2 bolt pulled out of a 67 impala, needs to be gone through as its been sitting out in the weather (with a tarp over it) comes with a set of heads, ram horn exhaust manifolds, water pump and whatever else I have laying around for it

$100.00   2 months ago
10 bolt gear - $100

10 bolt Richmond gear 456 100 call or Tex

$100.00   2 months ago
Fiberglass 3 inch fender flares bolt or mold in - $100 (Rochester)

I have a set of 4 bolt on or mold in 3 inch Fender flares for sale. I sand papered one to get a general fit onto my car but have now decided to do a more expensive option of widing the body. They have a bolt on look but can easily be molded in. They will need a little trimming to fit your car exactly. Pictures show measurements. Thanks

$100.00   2 months ago
3 350 four bolt main chevy motors - $100 (chicopee)

I have 3 chevy 350 four bolt main center bolt valve cover motors .they are re billable motors .they have been in inside storage for a few years and we're oiled.i am not 100% what each one will need...i would like to see 100$ each.i will take offers but believe 100 is reasonable ..

$100.00   2 months ago
1969 chevy impala 10 bolt posi - $100 (426 s main)

69 impala 10 bolt posi 336 gear complete rearend

$100.00   2 months ago
$100, GM 14 Bolt 10.5 ring pinion set complete quick swap with 1350 yoke

Actual pictures, cleaned and ready to install complete 4.10 gear set (tooth count 41 - ring & 10 - pinion). 1973-up GM Truck 3/4 or 1 Ton 14 Bolt 10.5 inch. The pinion bearings feel smooth when turning the yoke. No step in the pinion gear tooth pattern. Comes with the original u-joint straps and bolts and the pinion depth shim. The pinion support is the upgraded HD 2nd design casting number 260048

$100.00   2 months ago
ARP Rod Bolt Stretch Gauge Like New - $100 (Humbodt,ks)

like new only used once arp rod bolt stretch gauge. this is a must for installing arp rod bolts because a torque wrench is useless on these bolts. 100.00$ call or text donny

$100.00   3 months ago
2 bolt main 350 - $100 (Shelbyville)

I have a 2 bolt main 350 I'm looking to sell. It will need to be bored, the guy I bought it from dropped a nut in the intake and blew a hole in one of the pistons. I have rods and a crank to go with it. Currently standard bore, no bearings installed, casting # 3970010. If this post is still up, I still have it.$100 firm

$100.00   3 months ago
10 bolt posi - $100 (NORTH SIDE)

i am selling a 10 bolt posi out of a totaled truck it is in very good condition i assure you call or text at anytime for any questions will send pics if asked for or if i get to it first

$100.00   3 months ago
chevy 10 bolt rear ends - $100 (Pueblo west)

I have 2 Chevrolet 10 bolt rear ends. One is out of a late 90's Era Camaro maybe early 00's, not 100% sure. The 2nd one is out of an 02 blazer. They are both 5x4.75 bolt with disk.100 each firm no trades. I can give ratios and axle measurements if needed.

$100.00   3 months ago
Toyota/Lexus Steel Rims 15" x 6", 5 Lug, 4.5" Bolt, 60.1 Hub - $100 (LaPorte)

I have a set of steel rims that are 15" x 6", 5 Lug, 4.5" Bolt Pattern, 45mm Offset fits 94-01 Toyota Camry, Avalon, Lexus ES300, may fit other cars also 100 OBOContact at:


1 2 3 4 5 6 7 8 9 10


Last Updated on: December 9, 2016
0.0876140594482
2.14576721191E-6